Search Results
Searched for: Natura | Results 3561 to 3570 of 3807 |
Re: Brylane Latex Topper - Lynn2006
Feb 11, 2008 4:42 PM
Feb 11, 2008 4:42 PM
Kim, Thanks for letting us know how soft the Brylane toppers are. I will compare the toppers to my 36 ILD latex cores and my Overstock soft topper and take a guess at the ILD. Maybe they are on the lower side of softness from the range the Natura Customer Service lady gave me. I would let them air out for several days and then try them out with only one on top (maybe that is all you will need) and then two on top and decide then if you should send back one topper and buy another one firmer that is 1" also. My topper has not arrived. I only ordered one since I really only like a tiny bit of cushion. The Overstock topper I have now is a perfect softeness for me over my very firm latex bed except it is falling apart and is natural but not Talalay and is...
Re: Just ordered Sleepez 10000....- matress case - Lynn2006
Feb 11, 2008 4:38 PM
Feb 11, 2008 4:38 PM
I love my mattress case that has a little bit of a give and protects the latex and makes my mattress look like a conventional mattress. This is the 2nd case FloBeds sent me and it is just perfect for my Latex bed in my opinion. I like how it has protection on the sides so the zipper will not catch onto the latex like former mattress cover. Dave said he switched supplies to get the better mattress cover and this is what he sells now. It is organic cotton with wool inside and feels good. I would try the case the mattress came with again also and keep the layers firm with a less thick topper over the layers.
I slept wonderful last night with putting my 1" topper over my 39 ILD over the 36 ILD (was on top but put it in the middle) over the 44...
Re: Brylane Latex Topper - cloud9
Feb 10, 2008 1:21 AM
So it really is Natura. For the price Brylane is selling it at I wondered. Well good to know it's made in England by Dunlopillo. I was expecting it to be made in China or Sri Lanka or some place where the quality is suspect. Now I feel even better about this. I was a bit concerned that if I had to put it away for a few years until I reconstruct my mattress, it might have degraded by then. I think I can expect a product from Dunlopillo to perform the same way I...
Feb 10, 2008 1:21 AM
So it really is Natura. For the price Brylane is selling it at I wondered. Well good to know it's made in England by Dunlopillo. I was expecting it to be made in China or Sri Lanka or some place where the quality is suspect. Now I feel even better about this. I was a bit concerned that if I had to put it away for a few years until I reconstruct my mattress, it might have degraded by then. I think I can expect a product from Dunlopillo to perform the same way I...
Re: Brylane Latex Topper - BeddyBye
Feb 10, 2008 9:33 PM
Feb 10, 2008 9:33 PM
You were lucky it only took a couple of days to arrive. Mine said 7 days. It sounds promising knowing it's from Dunlopillo. Thanks for that bit of encouraging information!
*****************************************
Mattressmom wrote:
I jumped on the bandwagon and ordered one in Queen size. It came in a couple of days. It comes folded in a Natura zippered bag just like my Natura wool topper. The insert says it is Talalay Latex - Country of Origin: England - which means it is Dunlopillo, packaged in Canada....
*****************************************
Mattressmom wrote:
I jumped on the bandwagon and ordered one in Queen size. It came in a couple of days. It comes folded in a Natura zippered bag just like my Natura wool topper. The insert says it is Talalay Latex - Country of Origin: England - which means it is Dunlopillo, packaged in Canada....
Re: Brylane Latex Topper - kimmcgov
Feb 8, 2008 11:44 AM
Thanks for sharing all of your empirical evidence. I'm excited to get my toppers now. We also have a Natura wool topper which I think WOULD dampen any possible push-back or bounciness in the latex.
You have been such a wealth of information on this forum and are definitely the "Research Queen". No wonder you nailed your mattress the first time...
...
Feb 8, 2008 11:44 AM
Thanks for sharing all of your empirical evidence. I'm excited to get my toppers now. We also have a Natura wool topper which I think WOULD dampen any possible push-back or bounciness in the latex.
You have been such a wealth of information on this forum and are definitely the "Research Queen". No wonder you nailed your mattress the first time...
...
Re: Brylane Latex Topper - mattressmom
Feb 8, 2008 11:14 AM
Feb 8, 2008 11:14 AM
I just tried the doubled over Brylane topper under my Natura Comfort Plus wool topper and it is heavenly. The wool seems to dampen the "push back" of the Talalay. Too bad my husband is such a party pooper. He absolutely could not sleep with the one layer under the wool topper. He'd really hate this! He liked the topper by itself when we had it on the futon but that inch of latex made it unbearably soft for him on the new latex mattress....
Re: Brylane Latex Topper - mattressmom
Feb 8, 2008 10:57 AM
Feb 8, 2008 10:57 AM
I just opened the 2" 36 ILD Talalay topper I got to beef up one of our six inch Dunlop cores. I compared it to the doubled over (so it was 2 inches like the 36 ILD topper) queen sized Brylane Natura topper - and the 36 ILD topper is definitely firmer than the Brylane. I'd say the Brylane is closer to 25-28, assuming the other one is actually close to 33-36.
The Brylane topper also has quite a bit of the sweet "vanilla" latex smell if that bothers anyone. I like the smell but I know it bothers some people.
I still like the feel of Dunlop better but this was a great price for Queen size and should work well under the wool topper in the guest room. Now I have to find a good cotton cover for it....
The Brylane topper also has quite a bit of the sweet "vanilla" latex smell if that bothers anyone. I like the smell but I know it bothers some people.
I still like the feel of Dunlop better but this was a great price for Queen size and should work well under the wool topper in the guest room. Now I have to find a good cotton cover for it....
Re: Who has the cheapest Dunlop latex in 1-2" thickness? - mattressmom
Feb 8, 2008 4:57 AM
I think foamorder.com normally only...
Feb 8, 2008 4:57 AM
I think foamorder.com normally only...
Re: Brylane Latex Topper - mattressmom
Feb 8, 2008 4:10 AM
Feb 8, 2008 4:10 AM
I jumped on the bandwagon and ordered one in Queen size. It came in a couple of days. It comes folded in a Natura zippered bag just like my Natura wool topper. The insert says it is Talalay Latex - Country of Origin: England - which means it is Dunlopillo, packaged in Canada.
Not sure about ILD. Probably medium-ish. I put it on the bed under the thick wool topper to see if we liked it. I liked the comfy feel combined with the wool topper but my husband couldn't stand it. It was too soft for him. We took the whole thing off the bed after midnight and he zonked right out. At least I know the bed really works for him. I'll use the topper somewhere else or send it to my mom....
Not sure about ILD. Probably medium-ish. I put it on the bed under the thick wool topper to see if we liked it. I liked the comfy feel combined with the wool topper but my husband couldn't stand it. It was too soft for him. We took the whole thing off the bed after midnight and he zonked right out. At least I know the bed really works for him. I'll use the topper somewhere else or send it to my mom....
Re: Brylane Latex Topper - jimsocal
Feb 8, 2008 6:28 PM
Feb 8, 2008 6:28 PM
Why not cut it and put it just on your side of the bed?
We use an electric carving knife, but before that we cut latex with an exacto knife and/or kitchen shears....