Mattress Forum

We are only assuming that the 1" foam on either side is PU. It probably is, of course, but not definitely. And, for me, that's not a huge issue with 10" of Latex being the bulk of the support. The Sealy innserspring I have now is almost 12 years old, and the foam outer padding, which I assume is also PU, is still fine as outer padding, which is what it looks like it's being used for in the L&P mattress, as well. But, I can see it being somewhat of a concern.

I did see those latex mats at the Sam's website. (based on posts on this forum btw.  ) But, I don't have a Sam's Club membership, and I try and avoid shopping at Wal-Mart for a variety of reasons, some of which are similar to why I try to avoid "made in china".

Hi Gary,

At the time I bought the Ergo 400 I was told it was made by L&P and there was in fact a link to ErgoMotion on L&P's website. The link is no longer there and though countless salesman have told me the parts are from L&P and assembled in China, I really couldn't say for sure. You can email them and ask at info@ergomotion.us.

It is very quiet (my skittish kitties don't even notice it), and has the DC motor massage and wireless remote and a preset Zero Gravity position. Also comes with a back-up battery unit for use if there is power outage. I have no idea what a split king costs. As I haven't had any problems with it, I can't really say anything about customer service except they answer their emails in a friendly and timely manner.

My TP Cloud was firm at first, then softened to perfection, but THEN softened to the point where it became compressed and actually got hard, not firm, but hard. The foam density on the Cloud is 4.1lbs vs. the Rhapsody's 7lbs, so if I were to try TP again, I would go with the Rhapsody. On a side note: I wouldn't recommend TP's mattress protector. My queen was 89.00 and felt/ sounded like a plastic garbage bag.

I owned and hated the Englander Nature's Finest that I bought at Mancini's. It was called the Gardenia and was a pillow top, which was probably part of the problem. I have no idea what the composition of the bed was, I could never get a straight answer from Mancini's about it, I just know it was way too firm for me.

The Vera Wang non-pillow top was okay, and I really did like the Simmon's All Natural plush model (can't remember the model name) at Mattress Discounters. My impressions were based on laying on each for about 30 min. I never did look up the configuration of either to see if they contain PU foam. As Leo points out, PU foam does indeed break down. Unfortunate, because I really do love the feel of foam.

The jury is still out on talalay latex for me, but I would choose FloBeds over store brand talalay latex hands down due to their quality, awesome customer service, and customizing. Though most FloBed owners I've read prefer their beds firmer, medically I need softer, so right now mine is S/M/F.

As always, my posts are based on my opinions only, YMMV .

Natalie

If I had to do it all over again in dealing strictly with retailers (FloBeds, Sleepez excluded) here's the order I'd go with to keep all options open:

1) Try the bed from Costco - returnable if it didn't work out, nothing out of pocket

2) Take the 90 day trial on the TP Rhapsody DIRECT from TP - 175.00 out of pocket for return shipping on Rhapsody (don't take freebies that you may have to pay for if you return the bed).

3) Buy from Sleep Train where you can get your money back and still be able to go elsewhere if you choose to.

As for convincing your wife, the idea of trying the Costco bed and being able to return it may be a good start .

BTW, I read all the info on the bed and it does sound very nice.

Cheers,

Natalie

I personally don't care to shop at Costco or Sam's Club, it is like a rat race.  I am not a member of Costco and you can order online, you just pay 5% over.  I think it is the same at Sam's Club, online only, not sure of the charge without a card.  I don't have a card at either place, they both sell made in China items, and some US made.  It is like that everywhere.  I would love to shop somewhere they sell US made only, dream on, those days are long gone.  Even New Balance shoes I have to look inside the shoe before I buy, they are making more in China, and less in USA.  Off my soap box now.

I am undecided on what to do myself.  I am layering latex toppers over my old flippable spring mattress.  The springs are still good and hard as a rock.  I still am having hip pain.  Some people still do have hip pain even after going all latex.  We all have different experiences.  If you are young and have no aches and pains you will probably be a winner with latex.  I am too chicken to buy an all latex mattress yet.  Natalie was brave, but as she said she is still deciding.  Lots of people here have loved them, and lots of people have returned them (at Flobeds, some at Costco).

Good luck, and tell us what you decide and your ages (if you so desire) some of us do (I did) and what you physical situation (i.e. hip pain, bursitis) etc. and if the latex actually worked for you.  I just wish I could get brave and risk it, it is a lot of work getting a new mattress and costly.

I have been through so many mattresses already, before I realized it wasn't me it was the cheap crummy PU foam they were putting in the mattresses the last decade or so.  I had a spring mattress with memory foam over the springs, Europa, I hated it.  I think I had a Restonic before that (can't remember the names anymore).  I wasted $2,000 on the Sealy Trueform after 6 months I had to stop using it, it was killing me. I wonder if my hips will ever be the same now.

This is my opinion on the mattresses by the way.  Some people can sleep on anything and it works, not me.

You asked about mattresses that were latex that you could try locally.  There are Natura organic mattresses that are recommended by Budgy (our resident mattress saleperson/expert) as they don't have any PU foam or Boric Acid).   Not sure if you have a mattress store that sells them nearby.  Not sure of return policies.

Do you have a Savy Rest nearby?  Google them for locations.  Some people like those.  At least with those you can change the layers around, but you can return it.  You can only exchange Dunlop for Talalay, no returns.

I was also already considering #2. But, even with the guarantee, TP's prices are kinda steep. I suppose I could buy the motorized frame locally. But, $5K is a lot for the matts alone.

Thanks for the tip about Sleep Train. I thought all the chain stores had only exchange guarantees. It's good to know one has a money-back guarantee. OTOH, ST's prices were pretty steep. Looks like full MSRP on everything. Do they haggle like the others?

Hi Leo,
I don't know about all the Vera Wangs. This is pretty close to the one Sleep Train carries, it does have some PU foam in it.

ABOUT THIS MATTRESS

Expert Review By Rich
The three lowest priced Latex mattresses in this line all feel about the same. This model is substantially better than the other two. It adds a thick layer of latex foam in the quilting.

Expand to Keep Reading

[+]

This mattress provides significant benefits for you. It will further reduce pressure points on your body while improving blood flow. When you toss and turn at night, you reduce the time you spend in R.E.M. sleep. R.E.M. sleep is the most rejuvenating part of the sleeping process. With the extra latex foam in the quilting your time spent in R.E.M. sleep will increase.

Comfort

• 
  Latex Plush
• Comfort Scale 7

Quilt - Top of Mattress

• 
  Aloe Vera Finished Fabric
• Body Loft Fiber
• FireBlocker
  Fire-Safety Certified
• Soft Convoluted Foam
• Soft Foam

Comfort - Padding Layers

• 
  Talalay Latex Convoluted Foam

Mattress Build-Out

• 
  See what's inside this mattress

Correct Back Support System

• 
  6" Talalay Latex Core on 2" Base
• Edge to Edge Support

Foundation

• 
  Pure Response Foundation
• V-shaped construction
• Pure Response design

Mattress Set Height Information

• 
  Mattress: 11 1/2"
• Regular Box Spring: 9"
• Low Profile Box Spring: 6" (so your bed is lower)
• How to pick your Foundation

Warranty

• 
  No Flip, No Rotate
• 30 year warranty against manufacturer's defects
• First ten years non-prorated, last twenty years prorated

Compare all Latex Mattresses

• 
  Easy View Comparison Chart

 

I didn't see any Nutura beds on display in our area, though they are available through Sears online.  No Savy Rest either . Most of the stores here carry only the usual S brands, Englander, Aireloom and TP. I couldn't even find the Sealy TrueForm you owned... glad I didn't after hearing your experience with it.

Leo - My wife and I are "middle-aged". (If we live to be 100, that is.) Our bed is a 12 year-old queen Sealy firm innerspring, originally purchased from Costco. It looks and feels like it did on the day it was delivered. No dips, lumps, coil noise, etc. It's still flat and firm. It's topped with a memory foam topper for the last 5 years or so, also purchased at Costco. It's probably Novaform, and looks like 2". It's quite soft and acts more like a pillow top than body-hugging MF, so it's probably 3.x lb density.

We have no mattress-related pain, per se. I do wake-up with occasion whole-body stiffness, which is alleviated after a few minutes in the shower. But, we do have pillow-related neck pain which we are working on. I also have a delicate lower back due to a disc that easily goes out of whack and gets inflamed. Sleeping on my stomach does aggravate it. But, I have learned to sleep on my back or side, which completely avoids it. 

Believe it or not, our original reason for wanting a new bed is for the space. Our two-year-old golden retriever likes to sleep with us, and we enjoy having her. But, there's just not enough room to sleep comfortably, unless she's in just the right position. So, it's time for a bigger bed, king or cal king. And, while we're at it, one that is more comfortable, and may help with the moderate comfort/pain issues we have. And, ever since trying one at the store last weekend, we also want one with dual adjustable foundations too. It's an absolutely amazing thing that never interested me until actually trying it. I think that will also help with some of our neck/pillow issues.

We both like very firm support, with a bit of softness on top. With her, I imagine it's due to the fact that she's Japanese, and quite used to sleeping on what we would call a comforter (they call it a futon, not to be confused with what we call a futon) placed on the floor. With me, it's because, even though I am American, I enjoyed lay ingon a comforter on the floor while watching the color TV in the living room as a child. That enjoyment continues to this day, when I still often take naps on the floor. 

As a young adult I slept on a foam mattress, as that is what my mother bought at the advice of her doctor and chiropractor. She had it quite a while before she handed it down to me. And, even though it was quite used by the time I got it, it was the best mattress I slept on. I assume it was PU. I doubt it was latex. And, it definitely wasn't MF.  So, I would like to get foam this time, and probably latex due to its many positive attributes beyond just the comfort factor.

Gary, I forgot to tell you Mattress Discounters is owned by Sleep Train. MD has better prices but no money back, and only a 60 night trial with one time comfort exchange. If you buy from one, you're automatically in the computer on the other.

Sleep Train will haggle a bit and they do have good sales, but of course not on TP. And you're right ...TP, especially in the size you're looking at, is a huge amount of money!

I'm not sure what you have locally in San Jose. If you haven't already, Leo has a good idea about Googling to see if there are any smaller stores with a more varied selection. You may just find a latex mattress for your wife to check out, like, and give you a green light on the Costco L&P.