|
Hello all, still on my hunt for a good bed. My wife and I were originally looking at a Kingsdown Sleep to Live 800 Series (red/blue), but after reading some reviews we were a little skid dish and decided to look at a latex bed. Now I know there are a lot of on-line companies like Sleepez and FloBeds, but buying a bed untested from an online retailer just is a little too inconvenient as we have to deal with shipping cost if we get the firmness wrong. So we went back to my local Sleepy’s to look at what they have to offer for latex beds. Turns our they just received the new line of Dr. Breus latex beds that same day which are made by IBC. We tried all five models and narrowed it down to two. As this is a brand new line of beds it is hard for me to find on-line detailed specs. I know the salesperson tells me the bed is entirely Talalay latex, but I would like to confirm that from another source. Does anyone have anything they can share on me these beds? Or if there are any other recommendations of other beds we should look at? Thanks all. Dan |
|
Regina wrote: Hi, I started with a TempruPedic and now I a waiting for TempruPedic to come take it away and I will be replacing it with a Dr. Breus Bed. Sleeping on the TempurPedic (cloud supreme) was like sleeping on a landfill. The smell was unbearable and scary. Then I find out the polymers are not exactly healthy to sleep on whether or not you can smell them they are still there. My husband's back was still stiff after the first couple of nights. So Timby I am very curious to find out how you are making out with the Dr. B mattress, I'd rather end up with a latex allergy then cancer (check out the blogs on polyurathene memory foam). My delivery of the Dr. B mattress comes in six days while my husband and I sleep on the pull out in the living room I never thought getting a new mattress was such a difficult task.
Regina, Well, the mattress is doing well. This past weekend we put a 3” memory foam topper on the bed. It was a left over from the water bed. It has made the bed a little softer without making it to soft. The wife and I are have less back problems and as I stated the wife is sleeping through the night until the alarm goes off. My situation may be a little different than most. Since I had a plywood platform and 8” two bys for sides, this keeps the mattress from squishing out the side as it would on the showroom. I believe this tends to make the mattress a little firmer than when we tested it. The topper doesn't seem to make the bed sleep hotter than just the mattress. We are in Texas with record heat. It's only been a week and a few days but there doesn’t seem to be any deforming of the mattress. The wife and I aren't light weights and with me being over 6 feet, the bed gets a workout. I'm a displaced IT person and have been out of work for a good while. Also, with my lower back problems (2 herniated disks) I found that I have to lay down during the day to unload my back. The mattress is great to lay down and relax even on my stomach. As for now, I'm sticking with the Dr. Breus. I'l try and keep folks apprised as time goes on.
Sorry for the soap box...... |
|
timby, you hit the nail on the head. Most people walk into their neighborhood department/mattress store, try out a few beds in their price range and 45 minutes later are plunking down their credit card and arranging for delivery. I spent a lot of time reading about mattresses on the net and on this forum and ended up with a $2k Savvy Rest. My office mate thought I was crazy. He and his gf went to Macy's, looked at some, went to a mattress store and bought a $1400 S mattress on sale for $1000. He thought I was crazy. I don't have any physical issues but I don't sleep well any longer and I wanted a bed that was not going to contribute to poor sleep in six months. We are both happy with our purchases :-) Many of the people on this forum are like you have have physical issues and are looking for help finding a bed that will fit their special needs. Mattress shopping is extremely subjective. I hope the Dr. B works out for you in the long run. |
|
Folks It's been a little over a month on the new Dr Breus mattress. I feel we've gotten the bed broken in and are not having any problems. We've tried the 3" memory foam topper for a while. It was OK but because we are hot sleepers it's not working well at least for the summer time. Texas has been extremely hot and summer seems like it will never end. So we went back to the mattress only sans memory topper. No problems to report. The mattress is a little less firm is all that I've noticed. I spend a lot of time on the mattress because of my back condition and find it comfortable to lie down and unload my back. So that's all for now. Hope this helps someone with their buying decision. |
|
Hi, It's been a while and today I had my TempurPedic Rhapsody bed replaced due to saging and getting very soft (over the past 2-2 1/2months), to the point of back pain every morning while laying on my back, if I slept on my side I would be fine, and I purchased a 4" seta 2" memory foam and 2" topper to keep the heat down and the bed from getting softer and it did help. Tempurpedic warrenty replaced the Rhapsody (has 57% Visco Elastic Polyurethane foam, and 43% Polyurethane Foam) for any bed of theirs but the grand and I went with the BellaFina ( this bed actually has 41% Latex, 35% Visco Elastic Polyurethane foam, and 24% Polyurethane Foam, I did not even know this until I read the tag today), for no cost to me (the BellaFina is $300 cheaper). Took only 1 1/2 weeks total time,with new boxspings also. Hopefully this bed will last, the Rhapsody was great for the first few months then slowly decline and sags. best of luck |
|
Is that really true? That there is latex in the Bella Fina?? I had NO idea! Does the foam bounce back faster than other Tempurpedic memory foam beds? Does it feel a little bit springier? |
|
Dallasgirl wrote: Is that really true? That there is latex in the Bella Fina?? I had NO idea!
Does the foam bounce back faster than other Tempurpedic memory foam beds? Does it feel a little bit springier? Hi sorry for the late responce, working way too much. I am going to try to post the label picture tonight for you all. I had no Idea it had latex in this one or any until I read my label, I do not think any other has latex, I have been going into various stores to see and can not find any other tempur that has latex. Yes it does spring back quick, I have also found my mattress topper slowing the spring back and I have pulled it and tempur is sending me one for free, first one was from sleepys. It has been warm here ~72-80 and this mattress is holing great so far. I have not had it for months but I will get into findings more latter when I can figure out how to post pictures tonight. best of luck Don This message was modified Sep 27, 2011 by dfran1
|
|
Thanks so much Don! I did some calling around this weekend and it's indeed latex- 2" of latex under ~2.8" of memory foam on the Bella Fina. So interesting! I can't wait to hear how it's going for you over time!!! |
Here is the label of the bella Fina This message was modified Sep 27, 2011 by dfran1
|
|
We bought an all latex king bed a few months ago but I'm experiencing low back pain and pressure point pain (a side sleeper). We're considering returning this mattress and purchasing a Simmons Comforpedic. My big concern is the health risk of sleeping on memory foam rather than a more natural latex. Does anyone have any experience with the Comforpedic mattress? We're considering purchasing this from Sleepy's. Thanks for any feedback.... |
|
Hi, I have moved the bella fina to a spare room (I know lots of money tied up) due to waking up with back pain every morning!!!! We went to cardies furniture and compared the adjustable bases (my cousin has one and told me to buy one for my problem) so it was $3000 for the tempur wireless base or just under $2700 (both with tax and the $2700 includded matress protectoes with breathable sides) for a cardies one with 8" foam mattress's (2 twin extra long to make a king). All I can say is since last saturday night both my wife and I have not woke up with back pain 0 ZERO pain in the morning!!!!!! The one we purchased was the wireless remote with vibration (you can save a little and buy the wire version but I like the massage feature). It is made by the same company that makes the tempur just with a different control unit and repair on it is simple and reasonable I called and asked how huch replacement parts are and they range from ~$80-$280 the most (yes they come with a warranty, 3 years parts, they ship you the part and you send the old one back pre paid by them and 1 year labor if you need someone to do it for you). I wanted to know cause everything in my house is breaking this year. I should have just went there in the firest place, Heaven!!! Lots cheaper than a tempur and this 8" is very firm (my wife does not like firm but she loves this one!!) So all I can say is buy firm and no tempur is firmer than the one I purchased I tried tempurs firmest and there is no support firm like the one I received, but in fairness to tempur I tried the raspody (that I originally purched and formed creators most likely due to the wrong mattress protector supplied by sleepies sales person) with the adjustable base and it was night and day also! So I personally think that people sould be buying the adjustable bases with any non spring mattress or it will be hit and miss with more miss, shop around and find the best deal on an adjustable base with mattress (the mattreses cost only $50 each with the adjustable base, and around $600 a piece without so it was a no brainer if we did not like it we can just put the bella fina on instead). I wil most likely cut the bella fina in half when these cheap ones go (yes you can cut the foam, search for it, it will void warrenty but I have way too much tied up into beds) I weigh 195 so we need firm, if you weigh 120 then you may need softer or maybe not. My findings are to buy firmer than you think and do not judge in the winter (they are firmer then) and get an adjustable base (this has made the difference), I think almost any foam or latex will be good on an adjustable base, and you can buy cheap firm foam and save lots of $$$$$ best of luck any question just ask and I will keep you all updated |