Just ordered Sleepez 10000....
|
Ok, I bit the bullet and ordered the SleepEZ 10000 and returned the Costco Comfortluxe. I am a bit nervous about ordering a mattress without having tried it! :) However, what I really liked was Shawn even suggested I spend LESS and buy the 8500 model because "you just don't use more than 5.6/6" of foam." He said that until the mid-80s all the latex mattresses were just 6", but since then people think more is better. I ended up choosing the 10000 because of bed sheet fiting, Shawn said that sheets can be a bit of a pain to get for the thinner mattresses nowadays (Sheets are made for huge beds now) So despite my nervousness on buying something sight unseen, I just keep telling myself all the wonderful reviews I have read here about the service level with Sleepez means it should be ok! :) (i hope :) ). This message was modified Dec 15, 2007 by novahelp
|
Re: Just ordered Sleepez 10000....
| Novahelp, my friend, Dennis loves Costco also. Good luck with your new bed. Let us know what bed you chose from Costco and how it works out for you. My other friend LOVES Kingsdown and she has a bad back but likes a little softness over a firm bed. You may want to try that brand out also. |
Re: Just ordered Sleepez 10000....
|
BeddyBye wrote: Or you can have a mattress like mine which is both coils and latex and some HR PU foam thrown in. I feel I truly got the best of both worlds with the ability to change what's inside if need be. I'm sorry your all-latex kit didn't work out. I don't think I would feel good without some type of coil system, as well as latex and whatever materials feel good on my body. Good luck finding that perfect mattress! I think you are correct. I now believe I am a spring bed person and will need to throw on a nice topper to get the best of both worlds. What if I keep the SOFT layer from Sleepez as a topper, is that too soft for a spring mattress topper? This message was modified Feb 20, 2008 by novahelp
|
Re: Just ordered Sleepez 10000....
| Novahelp, I would go with a 2" soft latex topper and no more than that or you will sink in too much and hurt your back. My opinion... |
Re: Just ordered Sleepez 10000....
|
I forgot how soft the topper is. (The ILD). Myself, I really have a hard time finding a latex or memory foam topper that won't make my lower back hurt eventually. I can handle firmer latex INSIDE my mattress. And, my "topper" of choice is this super, comfy Ultimate Cuddle Bed® Plus Mattress Topper from Costco.com. It's like sleeping on a supportive cloud. In fact, I bought another one to have for the future in case they stop selling them. Best wishes to you! http://www.costco.com/Browse/Productgroup.aspx?Prodid=11189730&search=cuddle%20bed&Mo=0&cm_re=1_en-_-Top_Left_Nav-_-Top_search&lang=en-US&Nr=P_CatalogName:BC&Sp=S&N=5000043&whse=BC&Dx=mode+matchallpartial&Ntk=Text_Search&Dr=P_CatalogName:BC&Ne=4000000&D=cuddle%20bed&Ntt=cuddle%20bed&No=0&Ntx=mode+matchallpartial&Nty=1&topnav=&s=1 novahelp wrote: I think you are correct. I now believe I am a spring bed person and will need to throw on a nice topper to get the best of both worlds. <BR><BR>What if I keep the SOFT layer from Sleepez as a topper, is that too soft for a spring mattress topper?<br type="_moz"/> |
Re: Just ordered Sleepez 10000....
|
Lynn2006 wrote: Novahelp, I would go with a 2" soft latex topper and no more than that or you will sink in too much and hurt your back. My opinion... Appreciate your help. As an experiment, I slept last night on Medium-Firm-Xfirm. My hip doesn't hurt this morning, which confirms what I thought on how the softer layering isn't thick/dense/supportive enough to hold me at my weight and it compresses to something that is hard which hurts my hip. However, you knew it was coming :), my lower back is sore and my shoulder hurts! Additionally, the whole thing feel so hard to me that it's like almost sleep on a board or a traditional super hard/firm spring mattress. So you believe a 2" soft layer is going to fix all this? Seems to me a cheap extra firm spring mattress with a nice 2" latex layer is much more cost efficient. This message was modified Feb 21, 2008 by novahelp
|
Re: Just ordered Sleepez 10000....
|
Novahelp, I admire you for all of the time and effort you have put into this. I would have given up long ago. You really must be exhausted from so many uncomfortable and restless nights. However, the glaring problem to me in all of the configurations you have tried, is the 3 inches of soft foam for your comfort layer. It's too much in my opinion -- and I think in the opinion of most people on this forum. As a last ditch effort why not go to Target, or Bed Bath and Beyond or somewhere local and buy a 1 or 2 inch thick memory or other foam topper and try it on the firm set up you just mentioned. I would get a couple of different options (a 1 inch AND a 2 inch,) since you can return either or all of them if they don't work out. I think it would be worth trying before throwing in the towel and resigning yourself to a $400 loss. |
Re: Just ordered Sleepez 10000....
|
kimmcgov wrote: Novahelp, I admire you for all of the time and effort you have put into this. I would have given up long ago. You really must be exhausted from so many uncomfortable and restless nights. However, the glaring problem to me in all of the configurations you have tried, is the 3 inches of soft foam for your comfort layer. It's too much in my opinion -- and I think in the opinion of most people on this forum. As a last ditch effort why not go to Target, or Bed Bath and Beyond or somewhere local and buy a 1 or 2 inch thick memory or other foam topper and try it on the firm set up you just mentioned. I would get a couple of different options (a 1 inch AND a 2 inch,) since you can return either or all of them if they don't work out. I think it would be worth trying before throwing in the towel and resigning yourself to a $400 loss. Thanks for your advice. I have two (low quality) 1"memory foams that I will try (again). A couple days ago I tried to place both of them on the medium-firm-Xfirm latex combo on the weekend and it was yucky (I don't like memory foam due to the trapped and high heat feeling, i really like latex). But, heck what the hell right? :) and yes, I am just tired. I can't get more than ~6 hours a night now... and its been months like this... :) |
Re: Just ordered Sleepez 10000....
|
novahelp wrote: A couple days ago I tried to place both of them on the medium-firm-Xfirm latex combo on the weekend and it was yucky (I don't like memory foam due to the trapped and high heat feeling, i really like latex). I know what you mean about memory foam, I've decided I don't like it either -- it's just that it is so easily available. But you can probably find a regular piece of foam or PU foam topper to try instead. Then if that works, you could exchange your 3 inch soft layer for 1.5 inches or 2 inches of latex. Good luck. |
Re: Just ordered Sleepez 10000....
|
kimmcgov wrote: I know what you mean about memory foam, I've decided I don't like it either -- it's just that it is so easily available. But you can probably find a regular piece of foam or PU foam topper to try instead. Then if that works, you could exchange your 3 inch soft layer for 1.5 inches or 2 inches of latex. Good luck. I dont understand what you are saying to test? 2" memory foam medium firm x-firm I don't have a soft layer to exchange because I am not using it in the above configuration. |
Re: Just ordered Sleepez 10000....
|
novahelp wrote: I dont understand what you are saying to test?<BR><BR>2" memory foam<BR>medium<BR>firm<BR>x-firm <BR><BR>I don't have a soft layer to exchange because I am not using it in the above configuration. Yes: the above configuration with either 2 inches (or even 1.5 inches) of memory foam or PU foam. The soft layer I'm talking about is the one you still have from Sleep EZ (unless you already sent it back) which you are not using in this particular configuration. You could keep the medium, firm and x-firm and exchange the 3 inches of soft for a thinner piece of latex to use as a topper. Make sense? |