Need help with latex topper pad on top of innerspring mattress configuration
Sep 29, 2010 2:34 PM
Joined: Aug 3, 2010
Points: 3
I am a 35 year old, 6 ft, 178 pounds, side and back sleeper, with an ideal comfortaire air bed sleep number of 55, needing to replace my 10 year old IKEA full size mattress. My research and budget suggest that I should try the $289 2" Talalay of ILD 19 latex topper pad from habitat furnishings on top of my current mattress, which I may replace with another $350 IKEA inner spring mattress.

 

I am wondering if any of you have tried this configuration (latex topper from habitat furnishings on top of a generic inner spring mattress) and what your impressions might be. Would the layers slide?

Here are the factors I've considered so far:

1) Avoided cheap integrated latex because it will sag

2) Habitat furnishings have a 180 trial period for their topper pads, so if I don't like latex which I never tried I can return it.

3) Price is reasonable and I can always keep and use the mattress if the latex is not high quality.

Here's a link to their site if you want to have a look http://www.habitatfurnishings.com/latex_mattress_topper_pads.html

 

Thanks so much for you time,

Yiannis

This message was modified Sep 29, 2010 by yiannis
Re: Need help with latex topper pad on top of innerspring mattress configuration
Reply #6 Oct 3, 2010 2:42 PM
Joined: May 3, 2008
Points: 827
I agree with the previous poster that 2" is not enough.  I started with 2" of 24ILD, and added another 2" 24ILD.  It is nice and cushy now.  Perhaps too cushy, LOL.  But I think I probably could have gotton away with 3".
Re: Need help with latex topper pad on top of innerspring mattress configuration
Reply #7 Oct 3, 2010 5:37 PM
Joined: Oct 15, 2009
Points: 966
Leo3 wrote:

I agree with the previous poster that 2" is not enough.  I started with 2" of 24ILD, and added another 2" 24ILD.  It is nice and cushy now.  Perhaps too cushy, LOL.  But I think I probably could have gotton away with 3".

Leo3, are you using the 24ILD talalay latex from RMM?   How do you like it?

They could add 1" if the 2" is not enough.  Gunmann, have you done any research on whether 2 1" pieces would feel noticeably different than 1 2" piece?  That is an issue that has not been explored enough on this forum.  My assumption has been that there would not be much difference, but I have never tested it.

 

Re: Need help with latex topper pad on top of innerspring mattress configuration
Reply #8 Oct 3, 2010 7:30 PM
Sweet Deals, Sweet Dreams! Premium Mattress Outlet
Location: Anaheim, CA
Joined: Oct 2, 2010
Points: 32
sandman wrote:

Leo3, are you using the 24ILD talalay latex from RMM?   How do you like it?

They could add 1" if the 2" is not enough.  Gunmann, have you done any research on whether 2 1" pieces would feel noticeably different than 1 2" piece?  That is an issue that has not been explored enough on this forum.  My assumption has been that there would not be much difference, but I have never tested it.

 


Sandman,

Every mattress factory I have worked in has glued latex layers together (using latex adheasive) so there is no shifting of layers.  if you use the same ILD two 1" layers feel like one 2" pad.  If you use different ILD's as long as you put the softer ILD on top you will get a mix.  If you put the firmer on top it will feel like the firm one!

 

Gunman4440

Re: Need help with latex topper pad on top of innerspring mattress configuration
Reply #9 Oct 3, 2010 8:03 PM
Joined: Aug 31, 2007
Points: 404
gunman4440 wrote:

 


Sandman,

 if you use the same ILD two 1" layers feel like one 2" pad. 

 

Gunman4440


I disagree.  I think 2 x 1" layers will feel slightly softer than 1 x 2" layer if they are not glued together.  Being separate, the top layer will have more opportunity for lateral displacement in response to the body weight whereas with a solid 2" piece, body weight will cause more downward displacement that I think could result in a slightly firmer feel.
 

Re: Need help with latex topper pad on top of innerspring mattress configuration
Reply #10 Oct 4, 2010 1:27 AM
Joined: May 3, 2008
Points: 827
sandman wrote:

Leo3, are you using the 24ILD talalay latex from RMM?   How do you like it?

They could add 1" if the 2" is not enough.  Gunmann, have you done any research on whether 2 1" pieces would feel noticeably different than 1 2" piece?  That is an issue that has not been explored enough on this forum.  My assumption has been that there would not be much difference, but I have never tested it.

 


Sandman, Yes I am using the 24ILD talalay from RMM, 2" layers and then got another 2" over 2 months ago I think.  Now it is soft and cushy.  My shoulders and hips are good now.  But if I add anything other than my trusty soft poly blanket it is no longer soft sad.  I do find though side sleeping my leg (right below the hipline) maybe sinking a bit much and it kinda feels like pushing back sometimes.  If I didn't have the heat factor I probably could sleep through it.  The room is 78 degrees, and yes if only the room was cool I wouldn't have this sauna of a mattress problem.  I can't turn the a/c down though.

Re: Need help with latex topper pad on top of innerspring mattress configuration
Reply #11 Oct 4, 2010 6:03 AM
Joined: Nov 17, 2009
Points: 81
DianeK wrote:

 


I disagree.  I think 2 x 1" layers will feel slightly softer than 1 x 2" layer if they are not glued together.  Being separate, the top layer will have more opportunity for lateral displacement in response to the body weight whereas with a solid 2" piece, body weight will cause more downward displacement that I think could result in a slightly firmer feel.
 


 the top layer will have more opportunity for lateral displacement  can you please explain what that means.
 

Re: Need help with latex topper pad on top of innerspring mattress configuration
Reply #12 Oct 4, 2010 11:10 AM
Joined: Oct 15, 2009
Points: 966
Leo3 wrote:

.  The room is 78 degrees, and yes if only the room was cool I wouldn't have this sauna of a mattress problem.  I can't turn the a/c down though.


The warm room is probably most of the problem.  There is no general agreement on ideal temperature, but most say somewhere in the 60-72 degree range.  For me, I tend to think high 60s, so your might have a room 10 degrees hotter than ideal.  That is hard to overcome.

Re: Need help with latex topper pad on top of innerspring mattress configuration
Reply #13 Oct 4, 2010 11:13 AM
Joined: Sep 30, 2010
Points: 81
I really have to get an a/c and bite the bullet and pay the higher electric bill, if it is true that a warm room is the culprit. And I suspect from my own recent experience, that it is.
Re: Need help with latex topper pad on top of innerspring mattress configuration
Reply #14 Oct 4, 2010 12:15 PM
Joined: Oct 15, 2009
Points: 966
requin wrote:

I really have to get an a/c and bite the bullet and pay the higher electric bill, if it is true that a warm room is the culprit. And I suspect from my own recent experience, that it is.


Maybe you can get an a/c for just your bedroom.  That way you don't have to cool down the whole house.  The Chilipad might be worth a try if returnable.
 

Re: Need help with latex topper pad on top of innerspring mattress configuration
Reply #15 Oct 4, 2010 12:21 PM
Joined: Sep 30, 2010
Points: 81
If I get a/c, it would indeed be just for the bedroom (and maybe the adjoining workout room). 

I'm still debating the chilipad. I'm somewhat concerned about being able to feel the tubes/seams as I'm sensitive to that. It does offer a 90 day trial so maybe I'll give it a shot..but at over $400....gee whiz wally that's a lot of money. I think i could get an a/c for less than that..and the chilipad does use electricity too.

There was a used one on ebay going for about $100 but I passed as the seller did not answer some questions before the auction ended.

ETA--Last night I checked the temperature in the room and it wasn't as cool as the previous night when I slept w/out hot spots.  I woke as usual with hot spots so I really do see a pattern starting to emerge. I have to get a better thermometer as the one I'm using is a tiny little keychain thing about 2" high..hard to see actual temp but I can see when it hovers around 60. Seems I slept w/out overheating when it was just under 60 or so, but over 60 the latex still overheated.  A better thermometer will help narrow it down. Then if I get a/c I'll know what to set it at.

I also think if I eat too much spicey food (even black pepper), I overheat more. Odd but true, I think..

This message was modified Oct 4, 2010 by requin

Recent Posts