|
I had been given this site along with SleepEZ, FloBeds and SleepLikeaBear as recommendations to purchase a new latex mattress. I am a side sleeper that suffers from upper (shoulder neck) pain but more lower back pain from our current crappy old as heck spring mattress w/memory foam topper. My boyfriend says he is just fine on our mattress and is leaving it up to me (he's a snorer, side or back sleeper and about 200 lbs where i'm about 140), and if we are going to spend this much money i want to get him the appropriate ILD as well.
Flobeds says i should have M/M or M/F and him F/XF but i've also heard their ILD is off from SleepEZ and that i should go F/F for me and XF/XF for him? Does this sound about right? (or correct me b/c i'm getting more overwhelmed the more i read)
BUT since i'm a side sleeper i've started to read about this zoning and now am even more confused. is a 6" core good to start and then add toppers as needed? or should i really consider a topper to start as well? |
| 6" makes for a good core/support layers. However, you will also need a comfort layer/topper as well. This softer layer could be latex 14-22 ILD or so, or memory foam if you prefer. that. I can't comment on whether the ILDs are off at Flobeds or not. In general, it seems like you get more for your money at SleepEZ, but Flobeds has more bells and whistles. |
|
Thanks, I am having a hard time determining what ILD are best for us, as the sites just say M or F and i can't find the rating on their sites. Is there any difference whether the 6" core is the same or dif. ratings? As FloBeds rec's two 3" layers M/F for me, for example. |
| I don't think you should try to figure out the ILD's by reading, that is what the home trial period is for. More layers of latex will mean more adjustability and more comfort, so a deeper/thicker mattress is better. The zone effect does work for relieving back pain so it is worth paying something extra to get it. |
|
I think the above retailers are all selling good product. I've actually made purchases from all of them with no problems and I believe I got what they said I ordered. I've tried making my own latex bed and have been moderately successful, but recently, bought a V zone from Flobeds because they had a sale on seconds and I am a side sleeper and a believer in the zoning design for side sleepers. I only know of the 2 vendors selling the zoned mattresses and those are Flobeds and Custom Sleep Designs. My wife sleeps on the DIY zoned mattress that I tried to mirror the Custom Sleep Design model and I sleep on the vzone from Flobeds. Our guest bed also has a DIY latex mattress and I highly recommend them. If you are a side sleeper, I would recommend the Flobed Vzone and start out with their recommendation. You can make changes to it. I slightly altered mine and it only cost me an additional $75 (for a TXL mattress) for a replacement core when I wanted to change it and I got to keep the original core. (I get the impression that they don't want it back so they offer very inexpensive replacement cores, within limits). Flobeds posts their ILD's on their website under "specifications" : http://www.flobeds.com/mattspec.htm I am 5'10", 150 lb male and I sleep on vzone with the bottom layer being an XF and the middle layer, firm and my top layer (the zoned layer under the convoluted layer) of soft for my shoulders and medium for my lower half. It is all topped off by the 19ILD, 2 inch convoluted layer. It works pretty well and has helped reduce my back and shoulder pain. If I could make any change I would make the shoulder area even softer but the other layers support my lower body and help my back. Making the lower part any softer, causes lower back pain. I have bulging disks in my lower back so any sagging makes it worse. My original mattress had F/M on the bottom two layers but I felt I needed XF/F (bottom/middle layers) to get the proper lower body support. If I were a back or stomach sleeper, I wouldn't hesitate to buy from Sleepez or make my own from SLAB. I've noticed that people need anywhere from 2 to 5 inches of "comfort" layer, so the Flobeds is pretty much right in the middle but everyone is different. For a DIY mattress, 6 inches should be enough of a base. This message was modified May 14, 2012 by Sall
|
|
Sall wrote: I think the above retailers are all selling good product. I've actually made purchases from all of them with no problems and I believe I got what they said I ordered. I've tried making my own latex bed and have been moderately successful, but recently, bought a V zone from Flobeds because they had a sale on seconds and I am a side sleeper and a believer in the zoning design for side sleepers. I only know of the 2 vendors selling the zoned mattresses and those are Flobeds and Custom Sleep Designs. My wife sleeps on the DIY zoned mattress that I tried to mirror the Custom Sleep Design model and I sleep on the vzone from Flobeds. Our guest bed also has a DIY latex mattress and I highly recommend them. If you are a side sleeper, I would recommend the Flobed Vzone and start out with their recommendation. You can make changes to it. I slightly altered mine and it only cost me an additional $75 (for a TXL mattress) for a replacement core when I wanted to change it and I got to keep the original core. (I get the impression that they don't want it back so they offer very inexpensive replacement cores, within limits). Flobeds posts their ILD's on their website under "specifications" : http://www.flobeds.com/mattspec.htm
I am 5'10", 150 lb male and I sleep on vzone with the bottom layer being an XF and the middle layer, firm and my top layer (the zoned layer under the convoluted layer) of soft for my shoulders and medium for my lower half. It is all topped off by the 19ILD, 2 inch convoluted layer. It works pretty well and has helped reduce my back and shoulder pain. If I could make any change I would make the shoulder area even softer but the other layers support my lower body and help my back. Making the lower part any softer, causes lower back pain. I have bulging disks in my lower back so any sagging makes it worse. My original mattress had F/M on the bottom two layers but I felt I needed XF/F (bottom/middle layers) to get the proper lower body support. If I were a back or stomach sleeper, I wouldn't hesitate to buy from Sleepez or make my own from SLAB. I've noticed that people need anywhere from 2 to 5 inches of "comfort" layer, so the Flobeds is pretty much right in the middle but everyone is different. For a DIY mattress, 6 inches should be enough of a base. How would you compare the affect of using the 2" convoluted layer vs. a regular/whole 2" layer? I have 44-36-28 in the cover and am considering adding a 2" Celsion 21 layer under the sheet to soften and deepen the surface response. GK |
|
Thanks, so much for your reply. it actually helped. the zoning sounds perfect but the cost.!!! can you buy this layer in the future from flobeds? you said you got yours as seconds, is there a place on their site where these are listed?
Also my boyfriend says he can sleep anywhere so is letting it up to me to decide on the firmness - however i really think with the amount of money we are spending i should get the proper firmness for him (the sites rec f/xf for him vs m/f for me). right? (but can you do a bed w/only half vzone and then just a "regular" layer for the other side? does flobeds do this customization? i'm looking at cost overall too. though granted i'm willing to spend the 1600 for a mattress (sleepEZ 's price, just missed the flobed sale to make it equal price)...
|
|
GKDesigns wrote:
How would you compare the affect of using the 2" convoluted layer vs. a regular/whole 2" layer? I have 44-36-28 in the cover and am considering adding a 2" Celsion 21 layer under the sheet to soften and deepen the surface response. GK |
|
OCJen wrote: Thanks, so much for your reply. it actually helped. the zoning sounds perfect but the cost.!!! can you buy this layer in the future from flobeds? you said you got yours as seconds, is there a place on their site where these are listed. Also my boyfriend says he can sleep anywhere so is letting it up to me to decide on the firmness - however i really think with the amount of money we are spending i should get the proper firmness for him (the sites rec f/xf for him vs m/f for me). right? (but can you do a bed w/only half vzone and then just a "regular" layer for the other side? does flobeds do this customization? i'm looking at cost overall too. though granted i'm willing to spend the 1600 for a mattress (sleepEZ 's price, just missed the flobed sale to make it equal price)... They had a special sale back in October/November on seconds. I don't know of any place on their web site. I assume that they will do it again in the future and they periodically run sales similar to the Mother's Day sale that just went off. You could ask them if they have any seconds or just wait for the next sale. Give them your email and they will send you sale information when they come up. As far as the half zoning/half non-zoning thing, call and ask them. I would think that they might if it will help them make a sale and it's easy to do. I think they will work with you. I bought the other core months later and they have a guarantee. I thought they were very reasonable to work with as long as you are reasonable. They do want to make you happy if they can. They best thing is to call and have a conversation. It's a fairly small operation I think. |
|
Thanks!
I am in email conversations with both Flobeds and SleepEZ. It looks like the cost of the Vzone (alone) is $1000! A queen in the Posture select (6" core + 2" topper) is $2k, the Posture Vzone (6" core + Vzone + 2" topper) is $3k.. looks like i'll be getting that on sale or a DIY.. How much weight do you place on the site recommendations? SleepEZ recommended S/M/F for me (top to bottom) and S/F/XF for my BF - but are their ILD's different than FloBeds who also rec M/F for me and F/XF for BF.?
EDITED: yes the ILD's are off, flobeds recs M (28) / F (32) for me compared to SleepEZ M (30-32) / F (38-40)...
am i overthinking ( i guess my reasoning is ILD is more "standard") ? and should just go w/their recs.? This message was modified May 14, 2012 by OCJen
|
|
Sall wrote:
Thank you. That helps to nudge estimates/expectations along. GK |