Another foam factory bed (foamdistributing.com)
|
The saga begins. I bought the foam from Foam Factory, www.foamdistributing.com. I had seen mixed reviews on this site, but the price was right. Thank you for your help. I ordered last monday (6-22-09), it arrived today, 7 days after the order. Based on things I saw on this forum this weekend, I weighed the boxes before opening. Here's what I ordered, top to bottom, with my calculated estimate what the weight should be: $145 76x80x2" Memory Foam 4.5 lb King 31.6 lb $252 76x80x3" Memory Foam 5.5 lb King, 58 lb $ 50 80"x76"x2.5" Lux-R egg crate, 8.1 lb. (I assume a 2.5" egg crate is 50% air, 50% foam) $163 80"x76"x4" Lux HQ foam, 40.4 lb. OK, great. The shipping memo said total ship weight was 142 lb, I calculated 138 lb, we're happy. Today the foam arrived, and I weighed them. Flipping the bed upside down, I will start with the bottom layer first. My happiness drops as I go up in the foam. Weight of the boxes, as calculated, printed on the boxes, and weighed, then calculated density from the measured weight Layer calc wt Ship wt Actual wt Density 4" Lux-HQ: 40.4 lb 42 lb 39 lb 2.70 lb/cf OK< nominally 2.8 but I can deal. 2.5" egg crate 8.1 lb 13 lb 8 lb 1.78 lb/cf note this is the only one that was not in the box when weighed. Nominally 1.8, OK. 5.5 lb memory 58 lb 56 lb 48 lb 4.54 lb/cf So the 5.5 lb foam is really 4.5? Not what I ordered. 4.5 lb memory 31 lb 31 lb 13 lb 1.84 lb/cf NOT A TYPO! And still in the box. It felt the same weight as the egg crate but it's much bigger. Customer support opens at 10 AM EDT tomorrow; I will be phoning. I have opened the base and egg crate, they are airing out. They are keepers. The memory foam layers are still in their boxes so I can return them easily. Their "5.5" lb foam was 4.5 lb; their "4.5" was 1.8!! I will report how well their customer support responds. Thanks for all the help you already gave me, this site is a wonderful resource. |
Re: Another foam factory bed (foamdistributing.com)
|
OK, a brief update. The foam arrived two weeks ago today, should have been shipped back 10 days ago but I was in the back yard when UPS came by. Then they lost track of it. So they picked it up last tuesday, it got back to the factory on thursday 7/9/09, and they should ship the foam out "midweek" and will send tracking info when it ships. UPS agreed the 13 lb box weighed 13 lbs, but they though the box that I said weighed 48 lbs, only weighed 43 lbs. The next update will be when the new foam arrives, here's hoping it weighs what it should. |
Re: Another foam factory bed (foamdistributing.com)
|
OK, another update. On July 13th, the replied to my email asking what the status was, and said they should reship by midweek. On July 20, they shipped the 4.5# topper, the box said 34 lb, when I weighed it it was 32 (well within the variance of my bathroom scale, with two 2x4 spacers and a piece of plywood to hold the box). Great. They said they should ship the 5.5# topper "by midweek" and it has not shipped yet. I've nailed down the root cause, however. They do not manufacture memory foam. I've seen comments here about getting memory foam toppers from Overstock that were phenomenally underweight; well they have the same problem. They apparently use the shipping weight their manufacturer puts on the label (unconfirmed, just my supposition) and say they are having to individually weigh packages to meet my weight requirements. It seems to be SOP when a customer complains he didn't get what he paid for. Of course, the dark side is that my weight requirements are merely their published foam specifications, so while they may be unwilling accomplices to selling underweight foams they are certainly not unknowing accomplices. Anyway, I have the top 2", and the bottom 7", I'm just missing the middle 3". Personally I've been sleeping on, and loving, the 5" PU and 2.5" egg crate, but my wife is a side sleeper with sciatica and she's been sleeping on our old mattress because what we have is too firm without the toppers. I've been airing out the 4.5# and haven't put it on the mattress yet. |
Re: Another foam factory bed (foamdistributing.com)
|
DR_Mike, Thanks for this contribution and sharing all of the gory details. I think you are on to something regarding the density Quality Control issues being "passed along" to the end-customer -- even if its being done unknowingly. Perhaps this story will encourage other customers to call FBM and request that their package is weighed before shipping out. That 4.5# coming in so low is crazy. It almost makes me wonder if it was really 1" (and slightly under density). Regardless, I'm glad to hear FBM is working to make this right. I get the impression that MF has the most density QC problems. PS. You can't go wrong with a slab of Lux-HQ! |
Re: Another foam factory bed (foamdistributing.com)
|
Mike, why did you decide to get the LUX Egg Crate? I'm not very familiar with Egg Crate or its purpose/feel... And, do you think the 5 or so inches of memory foam is too much? I feel like I've seen 2 or 3 inches of it on top of mattresses, but not 5". thanks! I hope you're sleeping well... |
Re: Another foam factory bed (foamdistributing.com)
|
OK, I have the last of the foam. The 3" 5.5 showed up today, the box was labeled 56 lbs, I weighed it as 55, well within the accuracy of my setup. They are airing out; I'm glad things showed up because I leave for vacation tomorrow morning. Results from sleeping on it will have to wait. FYI, the foam is, from top to bottom: 2" 4.5# memory - Pink 3" 5.5# memory - light peach? Salmon? beige-pink? call it what you will. 2.5" 1.8# egg crate - light blue 5" 2.8# lux HR - blue. This is held together with an Overstock mattress cover, basically a fitted sheet with a 1/4-1/2" thick top. Now when we get back we'll see how we like sleeping on it... |
Re: Another foam factory bed (foamdistributing.com)
|
Electracat - The theory on the egg crate is as follows: First, I put the order in either just before or just after I found this page, so I knew a lot less than now. A prior link I found claimed to be very similar to the Sealy Tempurpedic Celebrity with this recipe. So I bought it, on the grounds that it was a $600 experiment to duplicate a $4500 mattress, and I would cheerfully start hacking it apart if I felt the need. Given that just buying hating and returning the Sealy would cost $500 it was an easy gamble. Second, when we tried the Celebrity in the store, it claimed about 5" of memory, and we liked it. I expect I will need some better pad on top to not sleep too hot, but my wife loved it and I liked it. So it was a good starting point, and I expect to ask for help in the next few months. They had a lower model with 2-3" that the sales lady said Oprah owns, we found it less comfortable. Third, Sealy's diagram at the store showed the egg crate as a "cooling channel" allowing airflow through the mattress. This is supposed to help the mattress stay cool. Yeah, unforced air cooling on the far side of 5" of high density foam (the Dr refers to a physics degree, not an MD, does it show?), I don't expect a major cooling effect but the added cost was minimal and if nothing else it should let the mattress innards breathe. Personally I've been sleeping well on the 5" of Lux-HR and the egg crate, but my wife is a side sleeper and says she bottomed out on that. Pleasant dreams, I'll be on an air mattress for the next week and a half. |
Re: Another foam factory bed (foamdistributing.com)
|
Well, we're back. Last night was just the foam with a sheet on top; we didn't want to do more work after getting back. Temps were about 90 F so we put the air conditioner on. I can certainly see where sleeping hot could be an issue but a mere turn of the knob fixed that for the night. Today I trim the lower layers with an electric carving knife and put the Overstock topper on. It's minimal padding and should be what we need to cool of the top layers a bit. The weather breaks tomorrow, we may try it sans A/C then. I may well find this to be too soft for me, but my better half loves it. Since she has back problems, solving her mattress issues takes priority. I've decided that I won't make a yea/nay decision for a month, at which point I may decide to change layers, maybe only changing my side. Again, the electric knife is your friend. If she has problems then I'll probably start by just pulling the 2" 4.5 top layer. If I'm the one with problems I may have to get creative. I need to remember that being allowed to be creative is not reason to invent problems... Again, the difference between hating this and hating the purchased model from the store is: if I hate this, I'm out $660 (including the Overstock topper), I have a pile of foam, a knife, and I can order more foam. If I hate the store version I'm out $500 and I still am out $4,000 to store credit in a store where I hated their flagship product. Upon reflection I can say I am quite happy with foamdistributing.com. From what they have told me, they are as much a hostage to MF quality as I am, only if I buy from them they will cull through their supply to get me the correct weight. If I buy a topper from Overstock and it's light then I'm out of luck. If I turn out to be unhappy with the mattress, well, they sold me what I asked for. It's my fault not theirs. |
Re: Another foam factory bed (foamdistributing.com)
|
>> if I hate this, I'm out $660 (including the Overstock topper), I have a pile of foam, a knife, and I can order more foam. If I hate the store version I'm out $500 and I still am out $4,000 to store credit in a store where I hated their flagship product. I couldn't agree more. That pretty much sums it up. Good call giving it a month. Be sure and send us an update! I do think you may find that much MF up top might grow to be a bit uncomfortable after a week or so. I am curious to see what your wife has to say about it after the first week. My experience was similar to yours -- I was good with the LUX with a little something to soften it up. My wife really liked the memory foam at first, but after several days her back suddenly started aching and did not get better. In all fairness it was Overstock MF and I had it over a worn Sealy spring mattress that I had removed all of the foam from. You are dealing with higher quality materials though, so I hope that it works out to your satisfaction. |
Re: Another foam factory bed (foamdistributing.com)
|
LatencyMachine - I may stop by Sleepy's again to test their mattress again. I swear this thing is firmer than what they offered. From things I've read, here and otherwise, the firmness and lifespan of memory foam seems to scale with density. Could the Sealy Tempurpedic foam have the same variable weight problems that I encountered and they just ignore it? Just a question, I have nothing more than a two month old memory of a store mattress to go on, and I certainly doubt they'd let me weigh it without paying for it. But how many people even know to ask what the foam should weigh? And how many of them will actually weigh their mattress? Or I could be totally off base, it wouldn't be the first time. Anyway, it's been a week. I cannot start thinking about cutting for at least three more weeks. But here's what we think so far: 1) My wife loves it. Time will tell, but she absolutely adores it at the moment. And while she might be shy about complaining about a storebought mattress, she certainly won't hesitate to suggest changes to a DIY project. This is usually a good thing... 2) I twisted my knee in softball, and have been sleeping on my side as a result. So the extra give has been nice. As has been the "Sink in and you're in position for a while" nature of the memory foam. 3) As I said, it's not as soft as what we laid on in the store. I just asked her about that and she said "I was wondering... No this is nice that might have been too soft." So it's not just me, but it is just a couple of two month old memories. And any questions of QC with Sealy would presume that the recipe I found online that specified this foam was even remotely close to correct in the first place. 4) OK, the weather has not broken. I think this mattress requires the air conditioner about 5 degrees before the old one did. It was much hotter without the Overstock.com mattress pad. I'll reevaluate when the promised cooling actually arrives. 5) Lateral motion transfer mainly consists of the fitted sheet being tugged as someone moves. The 2x4 and 3/4" plywood frame is a rock, with ample storage spaces. So far, we love it. |
Re: Another foam factory bed (foamdistributing.com)
|
OK, we've been sleeping on it for three and a half weeks. My wife absolutely loves it. I like it, but... Starting three weeks in, I started getting sore muscles in my back in the morning. Last night I got up at 2 AM and went into the other room with a sore lower back. So, time to start changing things. I'll leave the base alone and assume that 5" of memory foam is just a wee bit too soft for me. So what to do? I'll be putting in an order this weekend for more foam; I'll get an assortment of layers so I can do mix and match with them. My first plan is to get a 3/8" thick layer of the Lux and cut it in half from head to foot. I'll put 3/8" of that between the MF layers on my side of the bed, and below both MF layers on her side of the bed. I'll cut the Lux on as steep an angle as I can so the transition is gradual, hopefully that will make it harder to feel the abrupt change from my side to her side. Why Lux and not HD-36? Simple, the Lux comes in 3/8" thick sheets, the HD36 starts at half an inch. I'm thinking I want a thin layer of more firmness and less sinking. I will get a few layers so I can mix and match as needed; they will likely get used in an upcoming foamectomy on the spring mattress in the other room (the one I retreated to last night.) FYI, I just noticed that Foam Factory sells "skins" or "crusts" that look like the outer 1" of a PU pour. The hard outermost surface is supposed to be good for putting on top of springs. I think I'll buy a sheet of that when I get around to a foamectomy on that mattress. |