|
Our king mattress - two mattresses ago - lasted about 12 years, but then developed such deep body impressions my wife and I both woke up every morning in extreme pain. So I studied, read reviews, researched, read the forums here, and after months of that selected a Sealy Reflexion Latex mattress (KIng) in the hopes of having a mattress that would be comfortable, give us a good night's sleep, and resist body impressions (We're about 170 lbs for me, 140 lbs for her.) It felt WONDERFUL and we slept extremely well - but after only about 6 months some body impressions were starting to form, and the support started to feel not so great. Nothing deep enough for Sealy to do anything about it, though. Now, it's 3 years later, and we wake up every morning sore and achey. We do not have the money right now to replace the mattress, unfortunately, so we need someway to get some support back if possible, to last us for about the next year. My wife was asking me if perhaps some type of topper would help? Understanding it won't be as good as a new mattress, but something that would provide perhaps some additional support and might lessen the body impressions? Any thoughts or suggestions here would be most appreciated. I'm really dissapointed after doing so much research and still getting a mattress that lasted such a short time before being a problem, but we are where we are. Any help or suggestions for anything such as a specific topper that might help some would be most welcome. Thanks - Jeff |
|
You would have to slice open the mattress and remove whatever foam has failed, and then add a topper to make the topper helpful to you. If you put a topper on a "broken" bed it will just highlight the problem. This message was modified Nov 23, 2007 by MequonJim
|
| Can't you get it fixed under warranty? |
|
Most of the Sealy latex beds have a super firm synthetic latex core over which they place the ubiquitous convoluted PU foam as a "comfort" layer. This is most likely what has developed a trench, not the latex. A topper would simply conform to the body impression your mattress has already developed, and would probably cause you to hammock into an even deeper trench. About the only thing you can do at this point is remove the top and replace the foam over the latex, if you are so uncomfortable that you want to risk it. Until you open the top you have no way of knowing whether the foam is bonded to the latex or just placed on top of it. If it's bonded it could be difficult to separate and could damage the latex. If you do remove it look into replacing it with a latex topper. The core of your mattress should last many years and you'd want to replace the crappy PU foam with a material of equal quality. If you decide to replace the entire mattress check out Flobeds or SleepEz. These companies manufacture mattresses that are all latex with adjustable firmness. |
| Talk to Sealy. Tell them it's shot. Ask how constructed. If they won't cover it, tell them what you intend to do to fix it, and also tell them you will be spreading the word on the internet via various groups that the mattress is a piece of cr*p.If unsuccessful, have it opened up. Even if PU is glued on, someone who workd with foam should be able to cut it off, and replace w/ latex yourself. Have a zipper added for future adjustments, or as noted above, buy a new encasement. |
|
I thought that contacting Sealy would indeed be the best approach - but then we discovered that somehow, during our recent move here to Kansas City, we can no longer locate the receipt. Ugh. So I am guessing that Sealy will basically say hey, no proof of when you bought it, too bad. Though I suppose that it only cost a phone call (if I can even find a phone number - companies tend to "hide" pretty well these days.) Not sure if cutting open the thing and seeing if I can replace that top layer, etc. will be a viable approach. Again, my fault, but somehow I never saw that Sealy's "Latex" bed had a crappy PU top layer. My wife, when I mentioned cutting it open, said "and just what will we end up sleeping on tonight while you're still trying to put things together????" LOL! Thanks for the replies folks. So - someone mentioned a couple of vendors: if we purchase a truly "all latex" bed, will we avoid this problem in the future? It is so discouraging to spend over $1000 on a king sized supposedly nice bed, and 3 years later be miserable on it. It makes you very nervous about the next purchase. Thanks - Jeff |
|
Well it's understandable that you might be reluctant to cut your mattress open. That's kind of an "I've got nothing to lose at this point" venture. You mentioned you recently moved, so you should know that most major brand mattresses are usually manufactured by regional factories. If you've moved out of the region you originally bought your mattress in you could have a hard time getting the local factory to cover your warranty. Unless the store you bought the mattress from will stand behind it you are basically responsible for getting the mattress back to the factory that orignally made it. With something as big and heavy as a king size latex mattress this could be next to impossible. Mattresses made by companies like Flobeds and SleepEz are 100% latex. They should last 20 years without sagging if they are placed on a proper frame and foundation that will adequately support their weight. If you do develop problems--and very soft latex will get body impressions--these companies are reputable businesses that will stand behind their warranties no matter where you live. Also it's really nice to be able to switch layers around until you get it exactly the way you like it, or if your needs change over the years. You may also be able to find a local vendor who manufactures their own all-latex mattresses. That way you can try before you buy. All-latex mattresses will feel different than your Sealy with it's PU comfort layer. |
|
jefflackey wrote: My wife, when I mentioned cutting it open, said "and just what will we end up sleeping on tonight while you're still trying to put things together????" LOL!
Latex will have pin holes all across the top and bottom of the foam. It should either be off-white or light brown (sapsa). Polyurethane foam can be any color and will not have holes in it. If all of the layers of foam are glued together, it will be a difficult project. That means the electric kitchen knife will be used to remove the PU foam, like filleting a fish. Not for the faint of heart. That would be a bold move, and a repair worth photographing for us and others. |
|
jefflackey, We bought a Sealy Reflection Laguna Beach latex mattress three years ago. It was a pillow top and didn't last as long as yours did. Since we were at the nothing to lose place we cut the pillow top off the mattress. The pillow top was nothing but cheap yellowing foam. The rest of the mattress was a six inch base of Dunlop latex and three inches of Talalay. The latex was in good shape so we used an electric craving knife and cut it in half. It is now two twin mattresses on a day bed and trundle in DH office. This message was modified Nov 25, 2007 by Beach_Lover
|