Building my mattress up over the Sealy springs - comments please
|
Okay, now I have a real plan (though obviously it's not finalized - that's the purpose of this thread). Let me know if this sounds reasonable. Remember that I have problems in my shoulders, neck and arms. I think the lower back problems I have had are clearly from the mattress, not the accident. So I want to concentrate on making the mattress soft for my shoulders and arms, and just "normal firm" for my back. Here's the plan: 1" layer of VERY FIRM HR foam on the bottom right on top of the springs of the Fenway Sealy. (My question here, is: Is 1" best or would 1/2" or 3/4" be enough? Or two x 1/2" layers just in case I want to experiment with just one layer, or two?) Then I'll buy enough HR foam in various densities to experiment with 2 x 1" layers of HR medium and firm foam over the bottom layer. That's 3" of foam total. Then, over that, IF needed, maybe the 1 and 1/2" memory foam layer OR just one 3/4" or 2 x 3/4" medium soft latex as a comfort layer. Then, I plan to divide the bed into 1/3's and buy enough pre-cut pieces of 1" HR foam to be able to play with 2 x 1" of HR foam layers for a total of 2" over the bottom firm layer. Or should I go with 3/4" for these 2nd two layers for a total of 1 and 1/2" instead of 2"? I'll buy these layers in pieces cut for zoning in Firm, Medium Firm AND Medium, so that we can play with the placement of all those: firm over medium, medium over firm, medium over medium, etc. depending on the zone. For my shoulders I'll probably actually use some of the 2" soft latex and/or memory foam that we already have. If this works at all (i.e.; if the mattress feels anywhere near "good" over those springs, with these various layers of HR foam) then after awhile we'll experiment with some Dunlop latex. Oh, and also I'm buying one of those latex "toppers" from Brylane in a Queen size so we can cut it up for zoning for the twins. Comments? DIfferent ideas? Thanks. Had it not been for you guys I'd have never thought of taking apart the Sealy! And hopefully it will turn out to feel good once we get the right combination of foam over those springs! By the way, the Sealy sewn-on topper fits right back over the foam on its "hinge" (where we didn't cut that side) and it wouldn't take much to create a velcro seam to fasten it down with, or something like that... |
Re: Building my mattress up over the Sealy springs - comments please
|
BeddyBye wrote: Congratulations on a good night's sleep! I've also had two decent night of sleep last night and the night before. My sacroiliac pain has been better during the day, too. Not sure why, but I won't question it! Tell me, you said you had cardboard over the springs? Did you add this after you opened up your Sealy mattress? Or was it there originally? I don't think you'll need to worry so much about the actual Sealy coils. They're probably made by Leggett and Platt. If not, I have a feeling they're still made well. Again, I think it's mostly the PADDING they use OVER those springs that makes it feel so crummy after TOO short of a time. Good luck with your custom mattress! Sorry I did not reply earlier, I just saw this. No, we added the cardboard after opening up the mattress, only because we had NO firm foam on hand to make our mattress with , so it was our way of attempting to make the mattress firmer, since all we had on hand at THAT time was soft foam. Now we have replaced the cardboard with 2 very hard (62ILD!) foam layers of 1/2" inch foam (1" total as a bottom layer). However, after my first 2 nights I think the bed is now TOO firm for me, so I'm going to remove one of the 1/2" bottom layers, and also put more medium foam in instead of very firm foam. (We bought various ILD's of foam in 25" zoned pieces so we can experiment not only with firmness overall, but firmness in 3 zoned areas of 25" each. Right now we have the bottom 1" of very hard foam and then 2" of medium to very firm foam over that. I'm going to now try only 1/2" of the extra super firm bottom layer, and some less-firm layers over that, and then a 1" memory foam layer over all that. Also, some more soft foam replacing medium foam at my shoulders. This message was modified Feb 6, 2008 by jimsocal
|