|
OK, I've been lurking for awhile and am about to pull the trigger on building my own mattress. But I am very indecisive and would greatly appreciate input from all of you that have experience with latex. I am building a 12" Eastern King mattress to be placed upon a 14" solid platform bed frame. I've spent hours reading on this forum and researching assorted options with various online vendors. I've come to the following conclusions thus far. #1 — I think I'll take a shot at latex (though I must confess I've been very tempted to try to recreate the Tempurpedic Cloud Supreme after my wife and I tried one at a mattress store a few weeks ago and she really liked it). I'm drawn by fact that good quality latex mattress components seem to last a LONG time. #2 — I want LI "Talatech" Talalay blend latex for at least the top portion of my latex. #3 — Any PU foam used will be 2.8 lbs/cu ft density from foamdistributing.com. They have a 36 ILD medium foam and a 55 ILD firm foam. What I can't decide upon is how much latex to use. I have basically come up with four price points using four varying levels of latex/PU foam. I'd love to get your opinions/feedback on what you think. Here are the options, with the proposed layers listed from the bottom up. BTW, my wife and I are 5'10" and 6' respectively, we each weigh 160-165 lbs. and we're both side sleepers. Option #1, $779 (9" PU, 3" Latex) — 4" 55 ILD PU, 2.5" 55 ILD PU eggcrate (for airflow), 3" 36 ILD PU, 3" 24 ILD (soft) Talatech latex Option #2, 1042 (6" PU, 6" Latex) — 4" 55 ILD PU, 2.5" 55 ILD PU eggcrate (for airflow), 3" 32 ILD (medium) Talatech latex, 3" 24 ILD (soft) Talatech latex Option #3, $1209 (3" PU, 8.5" Latex) — 3" 55 ILD PU, 5.5" Dunlop Latex 3-Zone Core (32/36/32 ILD), 3" 24 ILD (soft) Talatech latex Option #4, $1473 (11.5" Latex) — 5.5" Dunlop Latex 3-Zone Core (32/36/32 ILD), 3" 32 ILD (medium) Talatech latex, 3" 24 ILD (soft) Talatech latex Because I'm concerned about whether my wife and I will really like sleeping on latex, I'm very tempted to go with option #1. If we really like it, we can always replace those foam components when they wear out in a few years or so with latex. Also, according to SleepEZ's web site, their latex mattress components (made by LI) have a 30-day money back guarantee, so this makes any of the four options a little less scary in case we don't like latex or we need to change some firmnesses, etc. Options #3 and #4 would use an affordable 100% natural Dunlop latex core from Arizona Premium Mattress Company. I'm really concerned, though... wouldn't 3" of soft latex on top of either 5.5" of medium latex (#3) or 8.5" of medium latex (#4) simply be too soft? I talked with Shaun at SleepEZ (he's very helpful, just as so many of you have attested) and he recommended 3" soft/3" medium/3" firm top-to-bottom. From what I've read here on the forums, some of you have found even this combination to be too soft, so I don't know what 3" soft over 5.5" or more of medium would be like. Maybe 2" soft over the 5.5" medium would be better? By the way, the 3" latex layer(s) in options #2, #3 and #4 will actually be a 2" layer plus a 1" layer of the same density totalling 3"... this will allow considerably greater flexibility in configuring the mattress. Also, do you think the LI Talalay blend is the way to go, or should I pay the premium and get the LI Natural Talalay? I'm not convinced that the natural is necessarily better than the blended. Well, that's it. If you got this far, you probably have some input for me, so fire away! This message was modified May 22, 2010 by pianoman
|
|
pianoman wrote: Regarding their return policy, SleepEZ has a 30 day money back guarantee on their toppers: http://www.sleepez.com/mattresscomponents.htm. Good luck with getting it right the first time in a week, LOL, it took me over 2 months to finally decide the wool on top mattress pad was causing me hip pain after I added 2" of 24ILD and still had hip pain. So it sometimes takes longer to figure it out. But you could be one of the lucky ones and get it right the first time. Maybe the 1" incremements will work for you, just not for me, just note it PROBABLY will be softer than the 2" and if you get 3" of the same it will PROBABLY be firmer. All in my own humble opinion, for what it is worth. P.S. It is time for me to find a new hobby, this mattress making deal for two years is enough already! Hope you find your solution faster than I did. This message was modified May 26, 2010 by Leo3
|
|
budgy wrote: pianoman; same reasons I believe natural dunlop is superior to blended. 1. natural rubber is more elastic 2. natural rubber contains proteins that are responsible for its hypoallergenic properties. 3. natural rubber is not made from petro chemical byproducts like synthetic latex. |
|
Leo3 wrote: Have you asked for samples of latex to give you an idea of what you think of it? No, haven't done that. Not sure I could really tell much from samples. |
|
pianoman wrote: No, haven't done that. Not sure I could really tell much from samples. |
|
pianoman wrote: If SleepEZ now has 30 day return privilege on toppers, then they've changed their policy. That's good. However, rockymountainmattress has free shipping on any topper so their prices are better UNLESS you plan to buy $275+ at Sleepez. And I do not know if rmm has a return/refund policy. I think not unless it's defective or something. But don't go by me, check to see. I will check if I have time and edit this if I'm wrong or if someone points out that I am wrong on that. |
|
FYI — Rocky Mountain Mattress toppers are non-refundable, according to the fine print on their website): 30 Night Satisfaction Guarantee ** **The 30 Night Satisfaction Guarantee is not available on adjustable frames, pillows, accessories, and mattress toppers. These items are non-refundable. This message was modified May 26, 2010 by pianoman
|
| Hey, finally pulled the trigger. Check out the new thread to see what I ordered... |