found some "deals" on latex in case anyone's interested
|
I am not affiliated with this company and have never ordered from them and have no idea if they're good or not. But in my search for a company selling Dunlop latex I found this and thought someone might be interested in these "close-out" deals they have: http://www.foamorder.com/clearance.html#latex Not even sure if these are great prices or not... So I just present this info for your consideration, nothing more. |
Re: found some "deals" on latex in case anyone's interested
| Here is another deal I just found: BrylaneHome has 1 inch latex toppers for 64.99 (twin, full, OR queen) and there is a promo for 20% off right now if you do a coupon search. It's money back within 90 days, so it's not much of a risk. There was a question about these toppers a while back, but the thread petered out with no real answers. Did anybody buy one of these, and if so, where are they made, and what ILD are they? |
Re: found some "deals" on latex in case anyone's interested
| I bought three from Brylane. The quality appears to be good. My guess would be around 25 ILD (22-28). Not convoluted. Look around on Brylane for various promotion codes (there were several when I bought). It may be even cheaper if you get smaller amount off, but free shipping. If you want more than one, may want to buy separately/sequentially for better savings. |
Re: found some "deals" on latex in case anyone's interested
| Do you think the latex is 100% natural, a blend, or all synthetic? It's a very good price... |
Re: found some "deals" on latex in case anyone's interested
|
mccldwll wrote: I bought three from Brylane. The quality appears to be good. My guess would be around 25 ILD (22-28). Not convoluted. Look around on Brylane for various promotion codes (there were several when I bought). It may be even cheaper if you get smaller amount off, but free shipping. If you want more than one, may want to buy separately/sequentially for better savings. It's 20% for a Queen or a Twin so I'll buy a queen and cut it up into zones for my twin. The Promotional code for 20% off one item is BHAA20. Comes out to $62.98 including shipping. Now if they only had a harder piece, I could use it for my bottom piece over my Sealy springs... 25ILD pretty firm for a "topper" isn't it? Couldn't one use that for a middle piece? I thnk the 2 x 1" pieces I have that I described as "toppers" are also more like "medium" ILD's. I would think a topper would be more like 18-22ILD. Question: if you put 2 x 1" pieces of 24ILD together, does that equal a 2" piece of 24ILD, or does putting them on top of each other change the ILD or feeling of firmness somewhat? Something tells me that 2 put together is not the same as one 2" piece...?
This message was modified Jan 31, 2008 by jimsocal
|
Re: found some "deals" on latex in case anyone's interested
| I haven't yet cracked my stash of Brylanes, other than to double up a king to soften a spare bedroom twin bed. It's a kid's grade minimally padded cheapo, and now it's comfortable. I can't imagine the Brylanes being firm enough for hip area zoning support layer. I believe that two should work well for continuous top layer, and additional ones for all shoulder layers and lower leg. 25 is plenty soft. When I was playing with LI, 3 layers of 28 ILD (8.5 inches) felt good for shoulders (though did have a "cuddlebed" type topper over everything to protect product). ILD is measured with 5.6" slabs, and sliced layers are supposed to be same ILD. Physics would suggest individual layers are not as firm, unless glued (and would also suggest that a sandwiched/glued layer of material between latex layers would raise ILD--possibly even rubberized, 3/8" grid, non-skid area rug material, not even glued). |
Re: found some "deals" on latex in case anyone's interested
|
If it interests anyone, I also found this zoned latex topper on the JCPenney web site: http://www.jcpenney.com/jcp/ProductsHOM.aspx?DeptID=30743&CatID=30743&Grptyp=STY&ItemId=132d9ba It's $109.99 for a queen size with free shipping and it is latex laminated to PU foam. There is no mention of how thick it is though, or of course, how firm. But, again, with a 90 day return policy, It would not hurt to check it out. I'm not sure if they carry it in the stores, but I might run down to our local Penneys and see if they have one. |
Re: found some "deals" on latex in case anyone's interested
|
I wonder if these are like the ones we were all buying on Overstock.com for $39.99. Those aren't too bad. Convoluted on one side to give it a different feel than the other side. A soft ILD about 22-28 my mattress guy said when I showed it to him. I can't use mine, though. Too soft for my back. mccldwll wrote: I bought three from Brylane. The quality appears to be good. My guess would be around 25 ILD (22-28). Not convoluted. Look around on Brylane for various promotion codes (there were several when I bought). It may be even cheaper if you get smaller amount off, but free shipping. If you want more than one, may want to buy separately/sequentially for better savings. |
Re: found some "deals" on latex in case anyone's interested
|
Did you buy a CuddleBed mattress topper from Costco.com? I have one of those on top of everything. Nice! mccldwll wrote: I haven't yet cracked my stash of Brylanes, other than to double up a king to soften a spare bedroom twin bed. It's a kid's grade minimally padded cheapo, and now it's comfortable. I can't imagine the Brylanes being firm enough for hip area zoning support layer. I believe that two should work well for continuous top layer, and additional ones for all shoulder layers and lower leg. 25 is plenty soft. When I was playing with LI, 3 layers of 28 ILD (8.5 inches) felt good for shoulders (though did have a "cuddlebed" type topper over everything to protect product). ILD is measured with 5.6" slabs, and sliced layers are supposed to be same ILD. Physics would suggest individual layers are not as firm, unless glued (and would also suggest that a sandwiched/glued layer of material between latex layers would raise ILD--possibly even rubberized, 3/8" grid, non-skid area rug material, not even glued). |
Re: found some "deals" on latex in case anyone's interested
| Beddybye: a Cuddle Bed sounds so dreamy. What is it filled with? Does it compress down much after time, and how does it wash up? |
Re: found some "deals" on latex in case anyone's interested
|
mccldwll wrote: I haven't yet cracked my stash of Brylanes, other than to double up a king to soften a spare bedroom twin bed. It's a kid's grade minimally padded cheapo, and now it's comfortable. I can't imagine the Brylanes being firm enough for hip area zoning support layer. I believe that two should work well for continuous top layer, and additional ones for all shoulder layers and lower leg. 25 is plenty soft. When I was playing with LI, 3 layers of 28 ILD (8.5 inches) felt good for shoulders (though did have a "cuddlebed" type topper over everything to protect product). ILD is measured with 5.6" slabs, and sliced layers are supposed to be same ILD. Physics would suggest individual layers are not as firm, unless glued (and would also suggest that a sandwiched/glued layer of material between latex layers would raise ILD--possibly even rubberized, 3/8" grid, non-skid area rug material, not even glued). Mccldwll-- Looks like you haven't opened them yet. I was wondering if they run true to size or if they come up short like the Overstock.com toppers? Sounds like a really good deal. By the way, the promo code is no longer valid. The new one is BHSUPER20 valid through 2-4-08. At that price, I'm thinking of ordering one and just putting it away in a dark place for the day when I deconstruct my mattress and replace the foam with something better than the PU crap that's in there now. I'm not really a big fan of Talalay, but I think incorporating 1" into the mix would probably be just fine. If not, I can always use it on the guest bed. |