|
There are so many choices for a latex topper. I have a very firm coil mattress that has very little foam and no pillowtop. I am using that as my base. I plan on buying a 2" medium topper from FBM. I'd like another top layer that is softer and I'm concerned the 20ILD from FBM will be too firm from what I've read here. Any advice on where to buy a reasonably priced soft latex topper? I also want to put a wool mattress pad on it, any advice on that would be welcome also.
Thanks. Jeff |
| about how thick is the Wool protector you mentioned? |
|
Jtfoster wrote: about how thick is the Wool protector you mentioned? |
|
You may not actually need both a medium ILD and a soft. That would make a fairly thick mattress. I'd consider starting with a 3" ILD 19 or so and see if it does it for you. The extra inch would make a difference. You can always add a medium layer later if you still need it. SleepEZ can indeed get you any ILD you want, although Shawn will likely try to talk you out of anything as soft as a 14, because it won't last as long. But he'll sell you whatever you want. |
| After speaking with a few people at different online vendors, it sounds like I should opt for a medium firmness topper. I just ordered a 3" talatech topper from FoamsweetFoam. It was a clearance item, so no returns, but at $299 for a king size, I took the chance. Wish me luck. I'll post the results after I have it together. |
|
Jtfoster wrote: After speaking with a few people at different online vendors, it sounds like I should opt for a medium firmness topper. I just ordered a 3" talatech topper from FoamsweetFoam. It was a clearance item, so no returns, but at $299 for a king size, I took the chance. Wish me luck. I'll post the results after I have it together. GK |
|
GKDesigns wrote:
GK |
|
Jtfoster wrote:
I've already forgotten what he told me. I'm thinking 28-30 ILD. They have them available in a variety of ILD. 3" of 28 might work ok. Hard to know how it will interact with the springs. It may be on the firm side... you could add 1-2" of 19-21 on top later to finish it off. Definitely use a wool pad over it to aid ventilation. Even a thin polyester pad tends to trap body heat at the top Latex layer... wool works better. GK This message was modified Jun 5, 2012 by GKDesigns
|
|
GKDesigns wrote:
3" of 28 might work ok. Hard to know how it will interact with the springs. It may be on the firm side... you could add 1-2" of 19-21 on top later to finish it off. Definitely use a wool pad over it to aid ventilation. Even a thin polyester pad tends to trap body heat at the top Latex layer... wool works better. GK I've seen wool pads from with a wide variety of loft. Some look to be a traditional looking pad with a thin layer of wool sewn in while others are a very thick fleece look. I don't want to lose any of the benefits of the latex by putting it under a bunch of wool, but I do like what I read about the benefits of wool Should I be looking at the thinner pads? Would I still gain the benefits? Any specific brands or specifications are welcomed. This message was modified Jun 5, 2012 by Jtfoster
|
|
Re wool mattress pads - I've just scoured threads on here so feel like I can chime in. Lots of people love the St. Dormeir wool pad - it appears to be stretchy and thin enough that it doesn't inhibit the benefits of the latex, but you still get the benefits of the wool loft. It's available several different places, including here: http://www.snuggledown.com/s/catalog/st_geneve/st_dormeir_wool_mattress_protectors/ However, because I wanted instant gratifcation (and many places selling St. Dormeir seem to have a multiple week lead time to order it) I ended up buying Foam Sweet Foam's mattress pad, which is wool loft and cotton, and also pretty thin: http://www.foamsweetfoam.com/king-natural-mattress-pad-4.html It has been a really nice change from our poly-fill, poly blend prior mattress cover. By the way, I'm doing something similar to you: experimenting with latex over my newly deconstructed pillowtop. I got 2" of "medium" (N3) natual latex from Foam Sweet Foam on clearance. It's definitely a major improvement over the lumpy 2 year old pillowtop, BUT my husband and I found it was a little too firm for side-sleeping comfort, so I'm awaiting delivery of a couple of 1" toppers in soft and extra soft (N2 and N3) - but YMMV. Good luck and keep us posted - this board is such a great resource. |
|
Warrigal wrote: Re wool mattress pads - I've just scoured threads on here so feel like I can chime in. Lots of people love the St. Dormeir wool pad - it appears to be stretchy and thin enough that it doesn't inhibit the benefits of the latex, but you still get the benefits of the wool loft. It's available several different places, including here: http://www.snuggledown.com/s/catalog/st_geneve/st_dormeir_wool_mattress_protectors/
However, because I wanted instant gratifcation (and many places selling St. Dormeir seem to have a multiple week lead time to order it) I ended up buying Foam Sweet Foam's mattress pad, which is wool loft and cotton, and also pretty thin: http://www.foamsweetfoam.com/king-natural-mattress-pad-4.html It has been a really nice change from our poly-fill, poly blend prior mattress cover. By the way, I'm doing something similar to you: experimenting with latex over my newly deconstructed pillowtop. I got 2" of "medium" (N3) natual latex from Foam Sweet Foam on clearance. It's definitely a major improvement over the lumpy 2 year old pillowtop, BUT my husband and I found it was a little too firm for side-sleeping comfort, so I'm awaiting delivery of a couple of 1" toppers in soft and extra soft (N2 and N3) - but YMMV. Good luck and keep us posted - this board is such a great resource.
Too thick? |