|
Hi all - I've been browsing this forum for the past two months in search of a new mattress. Ours was sagging and causing my husband back pain. After reading so many great reviews on latex, and being so frustrated with the innerspring mattresses, my husband and I decided to try out the latex. We initially ordered a 3 inch soft topper from Sleep EZ and we LOVED it! Oh my gosh it was wonderful! Based on that experience, we went ahead and ordered the full mattress. We have three layers of talalay blended, s/m/f, the medium and firm layers are split layers (the soft is all one piece). We got the full kit Friday and have slept on it two nights. My first thought was that the whole mattress together was too firm - it didn't give the same way the latex topper did. When we slept on it the first night, it felt like it was pressing into my shoulder and hips - just altogether a bit too firm. Also, rather frustratingly, my husband woke up with back pain again this morning. When he was sleeping on the spring mattress/topper combo, that didn't seem to be much of an issue. Here's my real question - what do we do now? We're rearranging the layers to try out s/f/f and s/m/m. I know I can call and swap layers, but I'm not sure what we need. We are very SHORT and small. My husband is 5'2" and weighs roughly 125lbs. I'm 5'0" and weigh 135lbs. We're both side sleepers. Do you think we need to go softer or firmer? Is anyone else out there as small as we are? I am looking for any advice I can get. I really want this to work for us as I so enjoyed the latex topper - it was amazing! I really want the whole mattress to be just as good. Thanks to everyone who has used this forum. I've spent quite a few hours perusing the messages and most everything you've posted has been helpful! :-) |
|
I found I only woke up with back pain if I made the bed too soft. If I made the back too hard, then I woke up with shoulder pain. I feel having a topper over layers of latex and being able to get the right combination takes time but is so worth it. I know if I had ordered the SleepEZ latex bed, and did not know about toppers, I would have not been able to make the bed comfortable. I would have felt the thick latex cores were either too soft under me or too firm. By FloBeds giving me a 2" latex topper that fit under my zipped up cover, I realized that was what I needed a thinner Talalay Latex topper (1" I now have that I bought from Brylane Lane) over very firm layers of Talalay Latex with a 46 ILD on the bottom and two 37 ILD's on top otherwise the bed hurt my back. Before my Latex Bed, I was sleeping on the floor with a Talalay Latex Topper under me since my very old way too firm mattress with no padding had finally fallen apart. I can not sleep on a sofa since it would give me back pain. Of course if someone buys a SleepEZ bed and does not sleep on their side, it may work for them without a topper or may work, if they have only layers of extra firm latex and then adding a latex topper after the fact. I tried sleeping on Dunlap Toppers but they hurt my back and shoulders and I needed that little bit of cushion over X-Firm and Super Firm Latex Layers. I had to correct my spelling errors for when I was using my old keyboard that needed to be replaced so that is why it says today that I edited my post. This message was modified Mar 15, 2009 by Lynn2006
|
|
My husband is still waking up with back pain. We changed the configuration to medium/soft/firm and have been sleeping on that for about 2 weeks. It's a little too much on my hip and shoulder so we're adding a 1" layer of soft latex on top of that. I'm also considering trying med/med/firm, just in case that's the cause of my husband's back pain. I also think we really need to change the foundation of our bed. We're currently using our old box spring and I think it's causing the latex to sag/not give enough support. We're going to try a new foundation and see if that helps. Any suggestions or comments are welcome. |
|
Today's latex mattresses are too thick to use with a box spring. They should always be placed on a solid foundation or a slat foundation with no more than 3" spaces between the slats to prevent the mattress from sagging through the gaps. Also, your old box spring was not designed to bear the weight of a latex mattress, so if the springs weren't shot before they probably are by now, making the mattress hammock even worse. You can probably find a foundation at you local discount mattress store for very little money. But first, try placing the mattress on the floor to see if that's any better on your husband's back. That way you'll know if it's really the box spring or if the mattress itself is causing the problem before you buy a new foundation. I have to agree with Lynn about the topper. My back likes a firm bed--although maybe not quite as firm as Lynn since the 32-38-44 combination of foam just made me ache all over. But 3" of soft latex was just way too soft for me. Many nights I lay awake thinking I might like it if the soft layer was only about half as thick. I have the same 1" topper from Brylane Lynn has and that's pretty much perfect. If you feel the 3" soft layer is too soft see if Shawn will exchange it for the 1.5" soft topper. I think it will still fit inside the cover you have. |
| I would try the latex bed out on the floor before making anymore changes and sleep on this for at least 2 nights and then report back to us. Cloud9 is right that a solid platform is needed for a latex bed to give the support necessary to get a good night's sleep. Then you will know if you need firmer latex cores or have other conclusions. |
| Can I just say how awesome y'all are?! I cannot thank you enough for all of your encouragement and help in this process. I really appreciate all your posts on this and the old forum - they have helped us out tremendously! |
| i think most of us here are happy to offer the benefit of our experience. Please be sure to let us know how things work out with your mattress. |
| I agree with Cloud9, that we are more than happy to help you out since other members have helped us when we were considering what bed would suit our needs and when we were adjusting our beds for our comfort. The members of this Mattress Forum have helped me so I do my best to return any help I feel I can give. |
|
We bought a piece of plywood to go over our boxspring (we don't have room to put the mattress on the floor). It firmed everything up! Maybe a little too much. Now we have to rethink and retry everything. It's a little frustrating at this point. But again, I think it's good to stick with it. We want to make sure we are going to stick with the latex before we make more purchases for it (like foundations or slat foundations), but if we need to purchase a foundation, we will find an inexpensive one. Our top layer Saturday was the soft (as we're trying all of our previous combinations again with the firmer foundation). My husband and I both woke up with back pain. I just don't think the three inches of soft talalay latex is going to support us the way it needs to - especially since we're smaller. However, I slept with the medium on top, soft in the middle, and firm on the bottom last night, and woke up with shoulder and back pain - too hard!!! I feel like the Princess and the Pea or Goldilocks - can't find that "just right" combination. We called Shawn and ordered some different layers for our swap (over a week ago), but we still don't have them. Tomorrow I'll be getting a 1" soft topper to put over it all. Hopefully that will help. Would a regular foundation be more forgiving and easier to sleep on than the plywood? It's really feeling HARD right now, which makes me want to go softer with the layers. But soft layers aren't giving us any support. My husband's back was happy this morning, sleeping on the firm over soft over medium, but he feels it's still a little too firm. He'll be trying medium tonight as top layer. We've had the full bed for just over three weeks. I know that several people on here have found that latex doesn't work for them. The latex was working over the boxspring, now it's not over the firmer foundation. I'd really like to hear from people who have had success with the latex. What are we doing wrong? What are we doing right? What else do we need to do? I feel like we're doing all we know to do right now. I'm frustrated, but not ready to give up yet. And I know this is a good place to ask questions and seek answers. Thanks in advance! Amy |
| Wait until you try the topper over the latex cores before making a decision and playing with more layers. That is the only way latex works for me is to have a thin layer of softness over very firm layers of support. |
|
I second the motion! Wait a bit. A regular foundation may be a slight bit softer than a plywood board. Foundations are just a framework of loosely placed slats covered by a sheet of heavy cardboard with a little padding over it. It may have a little bit more give--but not like a box spring. Another option are adjustable slats that allow you to increase (or decrease) the level of support, but they are much more expensive than a generic foundation. If the 1" topper over the medium over the firm still feels a bit hard in the shoulders, try the 1" topper over the medium with the 2.8" soft core in the middle and the firm on the bottom. If the medium over the soft was just a bit too hard that extra 1" of soft over it may hit the spot. |