|
(Note added in March 2012: Gave up on the old mattress & bought a new one. Added to this thread for continuity.) ======================================= (Note added in Jan. 2012: The topper-search saga turned into a mattress-surgery saga. Mattress surgery details are farther down in the thread.) --------------------------------------------------------- I'm looking for opinions on the next way to tweak my toppers. Any help would be greatly appreciated. Here's the current setup: Stats: 50-year-old woman, about 5'6", 120-125 pounds; side and back sleeper, but mostly side. A little joint pain in the hips now and then, but no serious illnesses or injuries to work around (knock on wood). (The 2" 32ILD topper is a new purchase. I read some old forum threads that I'd saved on my PC; waffled between 32ILD and 28ILD; thought about getting an inch of each; but that was more expensive, and I was most worried about getting something that would turn out to be too soft, like my previous attempts, so I went with the 32ILD.) So: With just those 3" of latex, I think my hips & back are OK, but my shoulders still get too crunched and I wake up with some arm numbness. When I add my 1"-thick polyfill fiberbed on top of the latex, my shoulders are good, but my hips sink down a little too far -- because this fiberbed is several years old and has flattened in just the hip area -- so I wake up with some low back pain. (The rest of the fiberbed is still in great shape.) One option: I thought about getting a 1" 20ILD layer from FoamByMail and adding it on top of the 3" of latex I already have. Recent posts seem to imply that FBM's quality has gotten better and more reliable than when I was here on the forums 2 years ago. But: Since I pretty much bottom out on the 24ILD layer, I'm skeptical that a 20ILD layer would help or would balance things out. (If I put the 1" 24ILD layer on the floor, my bony hips & shoulders go right down to the floor. If I fold that topper in half and lie on that, I still go right down to the floor. That makes me wonder about all the posts I see about 19ILD and even 14ILD layers -- I can't quite fathom how those would be useful, so I'm curious about that.) Another option: Get scrap foam and add some just in the hip area, under the part of the fiberbed that has flattened. SLAB sells some scrap latex of various sizes and ILDs. Maybe something like a 28ILD scrap under the hips would work? Another option: A 1" 28ILD layer (or equivalent in 100% natural latex) between the 24 and the 32? I'd like to avoid memory foam for now, because of the off-gassing issue, but won't completely rule it out. Thoughts? Other ideas? Thanks! Edited to add: 1) A thing called "Oodles" that had latex "noodles" in it -- great idea but poor execution. It would have been terrific if it had had at least twice as many baffles in it to prevent the noodles from shifting around within each baffled section. I half-heartedly attempted to hand-sew in more baffles but didn't know what I was doing and the thing is big & awkward, so that didn't work. (I used it on top of the 24ILD topper.) 2) Below the 1" 24ILD topper -- a 2" Dunlop latex topper from Overstock.com, unknown ILD & manufacturer. Wonderful for a while... but then it cratered in the hip area. Did not think latex was supposed to do that, but it did. [Edited to add: this was medium-firm synthetic, or mostly synthetic, Dunlop. Natural stuff would hold up much better, I'm sure.] This message was modified Mar 15, 2012 by Catherine
|
|
I hope you are okay. How we suffer for our sleep. I sliced my finger severely 2 days ago, but I was slicing a tomato and not my mattress. Be careful! It sounds like your springs don't give enough support. Could be the quantity and gauge or it could be the quality of the steel. I think it is unusual to go bad in 2.5 years, so that is a bit puzzling. All I can say is that when I lay directly on mine, they feel plenty firm. I definitely don't have a feeling of sinking in too much. Of course you have to sink in some, that is the point. It is hard for someone outside to evaluate your situation, so you have to use your best judgement. Not sure what to recommend at this point, but if the coils don't give enough support, you pretty much have to get a new mattress. Give a try though, before jumping to a conclusion. |
|
JasonRatky wrote: I'm OK; thanks. Some throbbing, but it'll subside, and I've got a pressure bandage on that will stay on until Friday morning. And the doc said the scar would just be a thin line, so that's good. They are [compressing more than they should] if your hips sink too far without any foam on them, in which case no amount of foam on top can really fix that without compromising their action. When I lay directly on my springs, I stay flat, at the top. They just barely compress enough under my hips & shoulders for the coils in between those two points to hit the arch of my back. So you've done mattress surgery twice, right? What springs have you found that work for you? And do you sleep on your back or side? (Thanks for all the help. I appreciate it.) |
|
Catherine wrote:
I'm OK; thanks. Some throbbing, but it'll subside, and I've got a pressure bandage on that will stay on until Friday morning. And the doc said the scar would just be a thin line, so that's good. So you've done mattress surgery twice, right? What springs have you found that work for you? And do you sleep on your back or side? (Thanks for all the help. I appreciate it.)
Yeah, both were mid tier posturepedics. One a full, 600 coils, whose perimeter I built out with stacks of vertical rails made of that polyethylene foam to accommodate queen size toppers. The other was already a queen, with a similar coil density (six sixty, or six seventy something). I try to sleep on my back exclusively, but do occasionally find myself on my side. If I wake up on my side on the spare, I'll have a tingling shoulder- too thin & firm a topper for my side. great for back & stomach though. No problems either way on mine, which has much thicker & softer latex. That one's good for side & back, probably not so much for stomach. Definitely overkill, but I'm not going to mess with it until it quits working for me. And not that it will have any bearing on your situation, but I'll try to get a more accurate description/measurement of how far I sink into just the springs today.
|
|
Earlier I wrote: ....removing the dacron & Novabond from the top of the springs did free up the coils to do their thing better. (Which, again, makes me wonder why those pads were put there in the first place. If you wanted to sell a firm mattress, wouldn't you be better off using different springs and a lower-gauge wire, instead of using open offset coils and a higher-gauge wire and then dampening them with fiber mats?) So, not to rag on the manufacturer of my mattress, but I just looked at the specs on another one of their mattresses, and all I can think is: "Why?" It's a similar deal to what I mentioned above, but this one I just looked at is called "Ultra Firm: Deluxe Firm Pocket Coil." Um... isn't that a contradiction in terms? Aren't pocket coils designed and marketed specifically for their ability to conform to the sleeper's body? If so... why would you put that same Novabond mat and dacron pad over those springs? This makes no sense to me. Want an ultra-firm mattress? Use a Bonnel coil or something like that, and a dense Novabond mat & the dacron pad. Want a more conforming mattress? Use pocket coils, and put something thin & flexible over the coils. Am I missing something here? (The specs also say "720 Luraflex, 14 gauge pocketed coil unit." As far as I know, Luraflex is the open-offset coil design from L+P, not a pocket coil. Hmph.) (Yeah, someone got up on the wrong side of the [uncomfortable] bed this morning.... The LuraFlex offset coils are marketed as being both conforming and supportive, I believe -- but they seem to be neither of those things for me.
sandman wrote: I hope you are okay. How we suffer for our sleep. I sliced my finger severely 2 days ago, but I was slicing a tomato and not my mattress. Yikes. Lots of that going around...
It sounds like your springs don't give enough support. Could be the quantity and gauge or it could be the quality of the steel. I think it is unusual to go bad in 2.5 years, so that is a bit puzzling. All I can say is that when I lay directly on mine, they feel plenty firm. I definitely don't have a feeling of sinking in too much. Of course you have to sink in some, that is the point. Yes, I'm puzzled. I can't quite see how the springs could go bad so quickly, so maybe I'm just not familiar enough with the mechanics of this stuff to know what is reasonable support & compression and what is not. The springs definitely do not seem to be supportive enough for me, though, for whatever reason. I'm going to try stretching that Novabond mat back over the springs again, but just over the hip region to try to dampen the spring action in that area. This message was modified Jan 6, 2012 by Catherine
|
)
(Maybe they would be in a lower-gauge steel? Maybe pocket coils can be more supportive in a lower-gauge steel? I'd like to understand this stuff but I don't have time to get an engineering degree....)|
The last thing I tried didn't work either. So, I guess I'm done.
No matter what I do, I cannot make this mattress work -- with or without the case, with or without toppers, with or without zoning. I don't understand why the mattress worked fine with a couple of toppers for the first year or so and doesn't work now under any circumstances, but I guess it will remain a mystery. Maybe the springs are fine, maybe they're shot; I just don't know. Seems like I tore apart a $700 mattress for nothing. I've wasted time & money, my bedroom is full of mattress parts and latex toppers, my hands have a bunch of nicks from the springs and a gouge from the razor-tool, and I still don't have a comfortable bed. What I do have is back pain *caused* by my bed. I can be a very analytical and methodical problem-solver, so it bugs the crap out of me that I can't figure out why this thing doesn't work or how to fix it... but I can't. Time to cut my losses. Getting a firm mattress and buying toppers seemed like a good idea, but didn't work for me (after the first year). Or maybe it would have worked if the mattress had turned out actually to be as firm as I thought it was -- but who knows? (Not me, clearly!) Getting a double-sided mattress didn't help, either, but just complicated the mattress surgery by adding variables, so I don't plan to do that again. It's just one more thing that seemed logical at the time.... On the bright side, I'm now up-to-date on my tetanus shot. -------- I'm open to suggestions on what to try next. Pocket coils, for something more conforming? Or low-gauge Bonnell coils for serious firmness? I have no idea. I'd still prefer an innerspring, rather than all foam (latex or otherwise), if I can find a spring system that works for me. I also have no idea where to buy a mattress next, because even the local manufacturer is building goofy things with illogical (to me) configurations and the same PU foam that all the big companies use. I could ask them to build me a custom mattress, but that would probably be more expensive and, more to the point, I don't even know which components to ask for, so that doesn't seem like a great idea, either. Phooey. I'm sleeping on the couch tonight. This message was modified Jan 8, 2012 by Catherine
|
|
So you sleep well on the couch? Have you ever tried just using a core of heavy duty furniture foam instead? Kind of a frowned upon solution around here, but might be worth a shot considering the best of HD/HR polyurethane foam costs less than any latex or new mattress, & it definitely won't sag under your hips like your springs are doing- the stuff can be had FIRM. I just removed a 5 year old block of it from a bedroom that was recently upgraded, & am amazed at how solid it still is. And the S&F eurotop they replaced it with is already forming a hill in the center. Of course pure foam of any type is just not going to give the same sensation as springs, & it sounds like that's what you want to stick with. So I'd try to give your setup more of a chance before ditching it, if you can handle any more nights on it. I can tell you're at the end of the line with it. I know that feel. At some point you do have to cut your losses & start fresh. Hopefully your toppers aren't part of the reason why your old setup all of a sudden quit working for you after a year either. Because while everything we read on the internet suggests latex is somehow impervious to the downfalls of other foams, with all the stories of seemingly magical decades old latex mattresses, they do break down just like anything else. Some of them prematurely.
Suggestions for pocketed coils? Yeah but it's a long shot. Those multistrand wire coils in beautyrest-black mattresses are incredible. Though finding a demo or someone trying to get rid one of those for cheap on craigslist or something is tough (am constantly looking), & way too expensive to buy new just for the springs. Not so much with posturepedics, they're cheap and common. If you start running low on budgeted time & cash to experiment with, considering so much in mattresses & components are non returnable & too expensive to justify disposable experiments, you could try no risk/hassle finished products at the big box stores that have liberal return policies with no restocking/shipping penalties. No fear of the suddenly quit working after a few months phenomenon- I once made a return at the very end of the 1 year window with no problem at sams. They have a 5lb memory foam over 2lb PU foam (3" + 8") mattresses there, & costco has 759 coil ultrafirm sealy posturepedics, either for <$800/queen set. Just throwing low hassle ideas out there for future consideration, because I wouldn't do anything out of frustration before completely ruling out what you're working with now. It sounds like you're patience is wearing thin at this point though.
Really want a set of those. Wish you could buy coils alone, but I've tried a few (US) component manufacturers both small & large, & it's hard enough to get a rep to even return my calls. They just don't want to sell a set of coils or two to an individual. This message was modified Jan 6, 2012 by JasonRatky
|
|
If you're worried about your springs' performance, put on old clothes (they might get snagged), & lay down directly on them. You can tell right away if they're all just all mashing down together underneath you, or actually conforming like you know they should.
This message was modified Jan 6, 2012 by JasonRatky
|
|
Sorry to hear your setup is not working at all. Does it seem to have more suppport or less after your removed the foam and use just your toppers? Is it possible that the springs are getting pushed to the side and not compressing downward, since you have to remove so much of the support structure? Is the edge support still in place? This is not an issue on my Sealy, since the coils are wired together and they are still encased in the foam and mattress cover it came. I can only guess that they use a fairly soft coil system. If they lied about the coil count, maybe the gauge is not what they said either. Possibly the matting provided some support until it started to wear down. Hard to say where to go from here. You may want to put your toppers directly on the foundation to see how that feels. You probably don't have enougth depth, but if you added 3" of base support you might have a decent latex/foam mattress. Is there a reason you want an innerspring? I think a high quality pocketed coil system is probably best for side sleepers. However, that would probably be pretty expensive, unless you find something used. It is hard to find anything reasonably priced that only uses good materials. As always, to a certain extent you get what you pay for. That is why some of us ended up doing surgery out of desperation. Certainly it is not the ideal solution. In my experience, the upper end Sealy Posterpedic coils provide plenty of support. I would not say that they conform to the body of a side sleeper the best, I have compensated by using 5" of foam above. So, the coils end up working like a mix between a box spring and a mattress. It would be nice is someone made a high quality innserspring with a zipper top, so it could be customized. Not aware of any though. |
|
JasonRatky wrote: So you sleep well on the couch? Not particularly. I just couldn't take another night on the mattress, and the couch was the only available surface other than the floor. JasonRatky wrote: Kind of hard to show, & not sure this is even necessarily proper, but I think mine are barely compressing an inch under my hips & shoulders, then not much at all elsewhere. I pretty much stay on the top. If yours aren't mashing down too much more than this, I doubt they're the problem, & definitely wouldn't give up on them yet. Thanks for the measurements & pics; very interesting. My springs, uncompressed, are about 5.5" high. I tried to measure how deep I sink, and it's awkward to do, so I might be off a little, but when I'm lying on my side, it looks like the lowest part of my hip sinks down about 2.5" -- in other words, it looks like the top part of the compressed springs there is at the 3" mark on the ruler. It's hard to tell from a somewhat contorted angle, though; I'd have to have a friend measure to be sure.
sandman wrote: Sorry to hear your setup is not working at all. Does it seem to have more suppport or less after your removed the foam and use just your toppers? I can't even tell anymore.
sandman wrote: Is it possible that the springs are getting pushed to the side and not compressing downward, since you have to remove so much of the support structure? Is the edge support still in place? This is not an issue on my Sealy, since the coils are wired together and they are still encased in the foam and mattress cover it came. It looks like the springs get pushed both downward and inward (rather than outward) when I'm on the mattress. The spring structure does have some edge support built in, and there are the helicals going across, but without the whole mattress case keeping everything together, there seems to be more room for the springs to move around, sideways as well as down. I'm sure that's not helping matters.
sandman wrote: I can only guess that they use a fairly soft coil system. If they lied about the coil count, maybe the gauge is not what they said either. Possibly the matting provided some support until it started to wear down. I don't think anyone lied, and I don't want to disparage this company's reputation. I think the company is an honest one, and someone -- possibly me -- got mixed up. I think the company is making some odd configuration decisions, and I think it doesn't quite have its act together in some ways (as evidenced in the print & Web materials I've seen, and maybe in some inefficient computer systems leading to some disorganization & confusion), but I don't think anyone that I encountered there is dishonest. Everyone I've talked to, both in 2009 and recently, has seemed straightforward and been helpful. Just want to be clear about that.
sandman wrote: You may want to put your toppers directly on the foundation to see how that feels. You probably don't have enougth depth, but if you added 3" of base support you might have a decent latex/foam mattress. That is what I will try next, since I have so much latex here. (I'll try it first without adding more base support, to see how it feels. I'll use the old medium-firm Overstock Dunlop topper as the base for now.) I'm thinking that I'd still prefer an innerspring because I'm used to innersprings and this is the first time I've had so much trouble with one that was still relatively new. And I'd love it if the innerspring provided the proper support and spinal alignment so that I wouldn't need to mess around with trying to zone the latex. But we'll see.
sandman wrote: It would be nice is someone made a high quality innserspring with a zipper top, so it could be customized. Not aware of any though. I don't know how good the innerspring units are, but Bay Bed & Mattress in CA sells innerspring mattresses that use latex on top and are enclosed in zippered cases. It'd cost a bit to have them ship a mattress to me, but they do ship out of state.
Thanks for the help, guys. Much appreciated. I'm pretty tired of banging my head against the wall trying to figure this thing out, and I have spent way more time on this than I can afford. This message was modified Jan 6, 2012 by Catherine
|
|
Hopefully using just foam will work. The dunlop should be a pretty good base. I vaguely recall Budgy at one point saying that the wires that connect the coils can be a weak link in the mattress. I don't remember why, but maybe they can stretch out or loosen up (or both). Especially if they are no thick enough or fastened well. That reduces the overall support because the surrounding coils are not helping as much. Just thought I would throw that out because your coils seems to be shifting more than I would expect. The fact that you had to remove the whole coils system probably did not help either. It is likely that there was no solution, but that is just a guess. 2.5" of sinking in does not seem like a whole lot, but that is almost 50% compression. That definitely seems like more than Jason or I experience, and we weigh more that you (at least I do). |