Took the plunge - and ordered a Sleepez mattress
|
All, after a LONG and exhaustive review of all the mattress options, I finally ordered a latex mattress from Sleepez two days ago. I ordered one of their 'Specials' which includes the same cores as the other mattresses, except that it comes with a terry cloth cover instead of the cotton/wool cover. Configuration: Firm/medium/soft talalay 2". Should arrive by middle of next week. Will give next update after it arrives. |
Re: Took the plunge - and ordered a Sleepez mattress
|
hi Eagle2, I actually bought the Queen 100% natural latex 3-layer 'special' from sleepez. The top layer is a 2" thick 'soft' talalay layer. I guess its prices lower than the other models as it does not have the regular cotton cover. Instead, it is a terry cloth cover. |
Re: Took the plunge - and ordered a Sleepez mattress
|
shakman wrote: hi Eagle2, I actually bought the Queen 100% natural latex 3-layer 'special' from sleepez. The top layer is a 2" thick 'soft' talalay layer. I guess its prices lower than the other models as it does not have the regular cotton cover. Instead, it is a terry cloth cover. shakman: I believe that SleepEZ allows one free exchange, do they not? If that is the case then possibly what you need is to exchange some of the layers that you currently have rather than return the whole bed. Or possibly they don't allow this on this special offer.1 thousand dollars for this much latex doesn't give them much profit margin, I would think. They do sell Dunlop at SleepEZ. Due to its greater density possibly what you need is a firm layer of Dunlop plus a medium layer of Dunlop topped off with a firm layer of Talalay. But I am guessing that this configuration, even without a mattress cover, may come to more than $1000. But if you have not already shipped the mattress back to SleepEZ it might be a good idea to talk to Sean about this. |
Re: Took the plunge - and ordered a Sleepez mattress
|
My latex mattess is ALL EXTRA FIRM layers (36 ILD of LI blended Talalay) on my side of the bed - each layer is 2.75", so almost 8.25" of xtra firm latex, and a 2" convoluted topper (I think 26 ILD?). I am finding this configuration to be quite firm. There is still a little give - it's not like sleeping on a concrete floor - but just enough to provide pressure relief in the hip area. It's very supportive. I'm convinced that everyone out there who needs a very firm mattress and wants to try the latex route is best served by going with a company where you can essentially customize the entire bed with layers of latex and a zippered mattress cover. All of the pre-manufactured mattresses I tried, or that I see online, seem to cater to more of a medium to medium-soft crowd. If you haven't already returned the mattress, you might just go ahead and exchange the firm and medium layers for xtra firm. If you return the medium/firm layers for extra firm, and that does not work out, can you still return the mattress for a refund? Or have you shot your wad with your one exchange? If you've returned the mattress and want to try the extra firm, I think you can get close to your 1k budget with sleeplikeabear if you get a 6" core of extra firm and a 2" topper. For the firmness and support, I still think it would be optimal to add another layer for closer to 9" of mattress, but that's something you could plan for down the road when funds permit. |
Re: Took the plunge - and ordered a Sleepez mattress
|
Eagle2 and Kimberley, thanks to both of you for your advise. I have already returned my mattress to sleepez. Given my personal experience with the firm/med/soft configuration, I am now inclined towards getting the dunlop 'extra firm / extra firm / med" (9" thick) or simply an 'extra firm / extra firm" (6" thick) from sleepez. BTW, it will be great if you can think of any non-latex options - I am just not quite a fan of the 'bouncy' feeling of latex (even though my 5yr old son LOVES to jump on it !) thanks! |
Re: Took the plunge - and ordered a Sleepez mattress
|
one more thing that I for got add in my earlier note: I am 5'10" tall male and weigh 140lbs; so I was thinking that two layers of extra firm may be enough as I am on the lighter side Again, will appreciate your thoughts. thanks |
Re: Took the plunge - and ordered a Sleepez mattress
|
shakman wrote: one more thing that I for got add in my earlier note: I am 5'10" tall male and weigh 140lbs; so I was thinking that two layers of extra firm may be enough as I am on the lighter side Again, will appreciate your thoughts. thanks Give your size shackman, the two layers might work. But I would think with this configuration, it would be even more important what kind of foundation you are putting these two layers on. I'm a big believer, when buying a latex bed, to have a very firm and solid foundation, otherwise how do you know where the give is, and how much give are you actually getting out of your foundation? At your weight of 140 pounds you might even get by with a bottom layer of extra firm with a top layer of firm. There are a lot more variables to consider than one would think there is in choosing the proper firmness with a latex mattress. You can always add a 2 inch convoluted layer of soft Talalay latex, if the bed is not soft enough. This message was modified Dec 21, 2009 by eagle2
|
Re: Took the plunge - and ordered a Sleepez mattress
| If you're not a fan of latex, why not try a waterbed. I hear they're pretty comfortable. I would have considered a waterbed myself if I lived in a single story home . . . |
Re: Took the plunge - and ordered a Sleepez mattress
|
I agree with Kimberly. I do not believe there is a less expensive mattress on the market today that can provide more comfort for the money than a waterbed. I slept on two different beds for over 20 years. Since my last bed had broken down, the only reason I changed was that at my age, and stage of life, I wanted to try something different. You can probably buy a soft sided waterbed for under $1000. As Kimberly indicated the big problem is.... do you have a solid foundation to put it on, and that includes a solid floor. Water weighs 8 pounds per gallon. My California King, with me in it, weighed well over 1000 pounds, that's a lot of weight! Then there is the possibility for leaks. And if you do want to change it, or move it, you better own a water pump or be able to rent one. While my waterbeds never leaked on me, the flotation material did break loose inside the bladder and wanted to bunch up on one side. When I finally took it apart I found that the inner liner had ripped out in the corner. Had the bladder ever leaked I would have had a room full of water several inches deep. If you do go with a waterbed I would highly recommend 80 to 90% waveless waterbeds. They have the potential for sleeping very, very, well. This message was modified Dec 21, 2009 by eagle2
|
Re: Took the plunge - and ordered a Sleepez mattress
|
Okay..since I sleep on a hardside waterbed I'll give you my 2 cents. The wife and I sleep on a 100% waveless waterbed with added lumbar support, this is after 3 years of sleeping on a innerspring that I did mattress surgery on. The mattress cost around $400.00 and we love it. People seem to be scared of waterbeds but once it is set up all I have to do is put in conditioner once or twice a year and clean the vinyl( no chance of dust mites). Since I don't have any cats I can't imagine a leak occurring but if one did occur there is a liner that would catch the water. When people are considering an alternative sleep system, I think waterbeds should be in the mix.
|
Re: Took the plunge - and ordered a Sleepez mattress
|
Shakman, From my experience, dunlop, being much denser than talalay, feels much firmer even in the same ILD. It also may feel more supportive to some people due to it's higher density (I've slept on both). The other thing is, I did not find that it feels at all bouncy in the same way that talalay does (which I find quite bouncy esp if bed is too soft). I think x-firm dunlop would feel extremely hard myself! I think Catlover posted some time ago that the folks at Savvy don't even recommend going with too much X-firm. You might want to search for her posts and/or call Savvyrest yourself. That said, we're all so different it's hard to say.... As to your weight and the number of layers or inches of latex, I think the firmer you go, the less of a difference it's going to make between 2 and 3 layers, if any at all. I was told by most latex bed places I called that if you're under 150 lbs, 2 layers is fine. And especially if you like a firmer bed. Having said that I weigh 130 (5'6") and I tried taking out one layer of my bed (I have 3 3" layers and a thin convoluted topper from Flobeds) to make it less bouncy, and found I prefer the three layers for comfort even though there's no way I actually directly feel the bottom layer (only someone much heavier would sink in enough that that might be a possibility, or if 2 heavier people were in the bed), However I have a softer bed-one side iis 2 layers of firm and one layer of soft on top, the other side is one layer of X-firm and then 2 layers of medium, then the convoluted piece on top of both sides. |