Brylane Latex Topper
|
I love everything about my latex bed so far but wish I had a 1.25" soft topper. I love my 1" Overstock Topper but it is not that sturdy and is falling apart and is a little small for the bed. I have been reading about this sale only good until Monday. Those that have the Brylane 1" latex topper, do you think the ILD is softer than the Overstock or the same? What do you think the ILD is? Is it man-made latex, blended latex or natural latex do you think? Do you have any idea if this is Dunlap latex processing, Talalay latex processing or neither? Does the latex topper fit the size of the mattress or is it a little small like the Overstock topper that is a little short on all sides? Does the topper have a smell when it arrives and if it does, how long does it take to go away? IS there one big piece for the Queen or King size or it the topper glued? I am still not sure since it is 1" and not 1.25" or 1.5" but maybe until I have time to call Dave to see if he can find me a softer latex topper than the 1.2" he got me that is wonderful but the 24 ILD seems to squishy to me and I do not sink in enough to feel the very firm support underneath that I love unless I put a 44 ILD under it and then it is too hard but still squishy. Then I go back to my 1" topper with the 36 ILD over the 39 ILD over the 44 ILD and feel this is very comfortable and I can live with this and rather err on the firm side than too soft due to my car accident causing the 5 herniated disks. I really think about a 17 to 20 ILD over a 38 ILD (if there is a 36 ILD that averages higher) over the 39 ILD over the 44 ILD would be best for me in about 1.25" thickness but I doubt if anything like this is made. :) I like that there is only a tiny fee to return it if it is not what I want. I wish the sale was for another week since I want to call Dave first and see if he has any ideas. |
Re: Brylane Latex Topper
| I had to order a Queen topper from Brylane so I could get the length for my XL Twin mattress. If I want to try it on my side, then it will mean having to trim it to fit. Hmmmm...that means I can't return it if it proves not to be what I want. I suppose I COULD ask my husband to sleep in the guest room for a couple nights while I try it out. :) I can't very well lay it across our bed and make him sleep on the "leftover part" that will be on his side. What to do...what to do. |
Re: Brylane Latex Topper
|
BeddyBye wrote: I had to order a Queen topper from Brylane so I could get the length for my XL Twin mattress. If I want to try it on my side, then it will mean having to trim it to fit. Hmmmm...that means I can't return it if it proves not to be what I want. I suppose I COULD ask my husband to sleep in the guest room for a couple nights while I try it out. :) I can't very well lay it across our bed and make him sleep on the "leftover part" that will be on his side. What to do...what to do. Why not just let it hang over the side? It might be a little awkward while you test drive it, but at least your hubby can have his half of the bed without a lump in the middle of his space. If you're sticking it inside the mattress cover just leave it unzipped, but it might be easier just to place it between the mattress and the sheet just to test it. |
Re: Brylane Latex Topper
|
mattressmom wrote: I jumped on the bandwagon and ordered one in Queen size. It came in a couple of days. It comes folded in a Natura zippered bag just like my Natura wool topper. The insert says it is Talalay Latex - Country of Origin: England - which means it is Dunlopillo, packaged in Canada. So it really is Natura. For the price Brylane is selling it at I wondered. Well good to know it's made in England by Dunlopillo. I was expecting it to be made in China or Sri Lanka or some place where the quality is suspect. Now I feel even better about this. I was a bit concerned that if I had to put it away for a few years until I reconstruct my mattress, it might have degraded by then. I think I can expect a product from Dunlopillo to perform the same way I would expect one from LI to. Mine is due to arrive on Tuesday, but if the Talalay smell is really strong I might have to let it air out in another room for a few days before I put it on my bed. I'm one of those people who are bothered by that rather overpowering sweet smell of Talalay. |
Re: Brylane Latex Topper
|
I thought about that, cloud9. I hadn't planned on putting it inside my mattress cover, at least at first. I want to try it as a topper on the outside of my mattress and see how that feels. Then I might replace my top layer on the inside of my mattress with that for a different feel. My mattress guy said that leaving the cover unzipped even slightly will change the feel of my bed. The cover, when zipped up, gives it a more "together, firmer feel". It would be too sloppy if left unzipped. Well, I'll wait to see how it looks and feels after it arrives. Should be any day now. I think on Tuesday. Maybe Wednesday. They shipped it the 6th and said it should arrive in 7 days. cloud9 wrote: Why not just let it hang over the side? It might be a little awkward while you test drive it, but at least your hubby can have his half of the bed without a lump in the middle of his space. If you're sticking it inside the mattress cover just leave it unzipped, but it might be easier just to place it between the mattress and the sheet just to test it. This message was modified Feb 11, 2008 by BeddyBye
|
Re: Brylane Latex Topper
|
You were lucky it only took a couple of days to arrive. Mine said 7 days. It sounds promising knowing it's from Dunlopillo. Thanks for that bit of encouraging information! ***************************************** Mattressmom wrote: I jumped on the bandwagon and ordered one in Queen size. It came in a couple of days. It comes folded in a Natura zippered bag just like my Natura wool topper. The insert says it is Talalay Latex - Country of Origin: England - which means it is Dunlopillo, packaged in Canada. |
Re: Brylane Latex Topper
|
Where would you say the Brylane latex topper falls here (Plush or Cushion Firm)? Or somewhere in between? I just hope it's a bit softer than my current 32 ILD layer. Firmness Level Indentation Load Deflection (ILD) Plush 14, 19, 24 Cushion Firm 28, 32 Firm 36 Extra Firm 40, 44 |
Re: Brylane Latex Topper
|
BeddyBye wrote: Where would you say the Brylane latex topper falls here (Plush or Cushion Firm)? Or somewhere in between? I just hope it's a bit softer than my current 32 ILD layer.<BR><BR>Firmness Level<BR> Indentation Load Deflection (ILD)<BR> <BR>Plush<BR> 14, 19, 24<BR> <BR>Cushion Firm<BR> 28, 32 <BR> <BR>Firm<BR> 36<BR> <BR>Extra Firm<BR> 40, 44 It's hard to say but I'd say mine is pretty cushy - mid 20's or so. It is quite a bit softer than the 36 ILD Talalay I got the other day. |
Re: Brylane Latex Topper
|
My two toppers just arrived and they seem pretty soft. I don't have a lot of experience with latex though, so can't really make a guess at the ILD. I'm wondering if two together will be too squishy, but we'll see... I might need to send one back and order a 1 inch piece of 28 or 32 ILD from somewhere else if we are sinking in too much or bottoming out. They smell like deep fried donuts. I hope the smell goes away... I'll report back after sleeping on one as well as both of them. |
Re: Brylane Latex Topper
| Kim, Thanks for letting us know how soft the Brylane toppers are. I will compare the toppers to my 36 ILD latex cores and my Overstock soft topper and take a guess at the ILD. Maybe they are on the lower side of softness from the range the Natura Customer Service lady gave me. I would let them air out for several days and then try them out with only one on top (maybe that is all you will need) and then two on top and decide then if you should send back one topper and buy another one firmer that is 1" also. My topper has not arrived. I only ordered one since I really only like a tiny bit of cushion. The Overstock topper I have now is a perfect softeness for me over my very firm latex bed except it is falling apart and is natural but not Talalay and is also a little bit small for my bed. |
Re: Brylane Latex Topper
|
Hmmmm....I hope it's not as cushy as the convoluted latex topper from Overstock.com. I had to take that off after it starting making my lower back hurt. Does anyone know how it compares, of those who own both? I simply can't have a feeling of sinking in TOO much. I'm still trying to figure out how I'm going to try it out on my XL Twin bed without cutting it. By the way, is the Queen glued together? In other words, is there a Twin size glued to another piece making it Queen size? I wish they had come in King. ****************************************************** mattressmom wrote: It's hard to say but I'd say mine is pretty cushy - mid 20's or so. It is quite a bit softer than the 36 ILD Talalay I got the other day. This message was modified Feb 12, 2008 by BeddyBye
|