|
I love everything about my latex bed so far but wish I had a 1.25" soft topper. I love my 1" Overstock Topper but it is not that sturdy and is falling apart and is a little small for the bed. I have been reading about this sale only good until Monday. Those that have the Brylane 1" latex topper, do you think the ILD is softer than the Overstock or the same? What do you think the ILD is? Is it man-made latex, blended latex or natural latex do you think? Do you have any idea if this is Dunlap latex processing, Talalay latex processing or neither? Does the latex topper fit the size of the mattress or is it a little small like the Overstock topper that is a little short on all sides? Does the topper have a smell when it arrives and if it does, how long does it take to go away? IS there one big piece for the Queen or King size or it the topper glued? I am still not sure since it is 1" and not 1.25" or 1.5" but maybe until I have time to call Dave to see if he can find me a softer latex topper than the 1.2" he got me that is wonderful but the 24 ILD seems to squishy to me and I do not sink in enough to feel the very firm support underneath that I love unless I put a 44 ILD under it and then it is too hard but still squishy. Then I go back to my 1" topper with the 36 ILD over the 39 ILD over the 44 ILD and feel this is very comfortable and I can live with this and rather err on the firm side than too soft due to my car accident causing the 5 herniated disks. I really think about a 17 to 20 ILD over a 38 ILD (if there is a 36 ILD that averages higher) over the 39 ILD over the 44 ILD would be best for me in about 1.25" thickness but I doubt if anything like this is made. :) I like that there is only a tiny fee to return it if it is not what I want. I wish the sale was for another week since I want to call Dave first and see if he has any ideas. |
| BeddyBye, I kept the package to the Overstock Topper and mine does not say Talalay and says Natural Latex. Mine is very soft and I only like it inside my zipped up cover over a 39 over a 36 over a 44. I am still thinking of asking dave to exchange two of my 36 ILD's for two more that are almost a 40 ILD since I like my bed very firm with a tiny bit of cushion on top. I like the 1" cushion. I am hoping the Brylane topper can replace my Overstock Topper since I was hoping it would b sturdier. |
|
BeddyBye, There is not a glue seam on this topper — maybe because it is Dunlopillo?. It's a good question as it seems that all queen size toppers made by LI are made of two pieces glued together. If you are only using one of the toppers maybe one inch would not bother your back even it it were pretty soft... but then again Maries's husband knew right away that he couldn't stand it. It seems like a good idea if it doesn't work as a top layer to try it inside your mattress. I am going to air mine out tonight and put it on the bed tomorrow. Stay tuned... |
|
kimmcgov, it could very well be the different brands and the way they do it. I'm hoping I made a good choice! We'll see in a day or so. I'll be looking forward to hearing how yours feels! ***************************************************** kimmcgov wrote: BeddyBye, There is not a glue seam on this topper — maybe because it is Dunlopillo?. It's a good question as it seems that all queen size toppers made by LI are made of two pieces glued together. <BR><BR>If you are only using one of the toppers maybe one inch would not bother your back even it it were pretty soft... but then again Maries's husband knew right away that he couldn't stand it. It seems like a good idea if it doesn't work as This message was modified Feb 12, 2008 by BeddyBye
|
|
kimmcgov, I can't wait to hear your update on your topper after you air it out. I think some of the smell could be the packing material and then I guess everything outgasses to a certain extent with some material outgassing over the lifetime like Formaldehyde in pressed wood that I can not tolerate and others for a short amount of time like freshly cut pine wood. I am happy to hear there is no glue and the topper is one piece since in the picture it is two pieces glued and I prefer one piece like my too small Overstock topper. Again I slept well with my 1" Overstock topper over my 39 ILD Latex core over the 36 ILD latex core over the 44 ILD latex core over the slat box. So I have a feeling after my topper arrives, I will want one more 39 ILD latex core from FloBed. Even though they only have 36 ILD and 44 ILD, I found out from a poster here that I can ask for the 36 ILD to be a higher firmer average since Latex International has the testings on th side of the mattress if it was not cut off when the 6" core was cut in half. I sure hope I like my Brylane Topper since it is blended latex and so far all my toppers have been all natural unless the overstock topper is blended but the package says all natural. |
|
kimmcgov wrote: They smell like deep fried donuts. I hope the smell goes away... I'll report back after sleeping on one as well as both of them. Deep fried donuts. Tee hee... Some people might find that a selling point. I wonder if they add that smell or if that is the natural latex. All the other plain latex pieces I got from Sleep Comp had absolutely no smell at all. The natural Dunlop six inch cores and the 2" 36 ILD Talalay were all from Sleep Comp - but they might have been made by Latex International for all I know. I'm so confused about all these manufacturers and suppliers....... |
|
BeddyBye wrote: By the way, is the Queen glued together? No glued seam on my Queen topper either. I think Dunlopillo must use different size molds than LI does. I think LI Talalay larger than Twin XL has a seam. |
|
I just put the topper on the bed underneath the Natura fleece wool topper. I'll start with just one and see how that feels. Them maybe—or not—add the second one... By the way, the topper is actually a little wider than our bed. It measures 61 inches across. This is a first, as usually companies cut them smaller— to save money, I guess. |
|
LOL. Deep fried donuts! I love the smell of talalay latex! At least it's not fattening. :-) mattressmom wrote: Deep fried donuts. Tee hee... Some people might find that a selling point. I wonder if they add that smell or if that is the natural latex. All the other plain latex pieces I got from Sleep Comp had absolutely no smell at all. The natural Dunlop six inch cores and the 2" 36 ILD Talalay were all from Sleep Comp - but they might have been made by Latex International for all I know. I'm so confused about all these manufacturers and suppliers....... |
|
My Brylane Latex Topper arrived and I opened it up to air it out and the smell is mild compared to a topper I was sent that had a glue seam and was 100% natural Talalay Latex that smelled so bad for several days. I will air it out a few days before trying it. It definitely is as soft as my Overstock topper and is fragile too since it just ripped. It is a little dirty but look like once I air it out it will be the right size for my bed. If it is a little big I may have to cut it so it will not bunch up since the 1.5" latex topper Dave sent me bunched up bothering me being slightly too big for the one I just sent back. But the one Dave sent me was sturdier and much nicer but had that glue seam and I think the glue seam bothers my allergies. I can see I will not be putting my Overstock topper over this as I was hoping it would be a 32 ILD. I will see how it is compared to my overstock topper and report back to all of you. Then I can call Dave and let him know if I need one of the 36 ILD's exchanged for a 39 ILD so both sides of my bed are equal. My Overstock Pillows arrived also but despite having just about no smell and being so white the natural latex is not any softer or flatter than the latex pillows I bought from them lat year. Their web site seemed to indicate it was so I was thinking I would be getting a lower profile pillow. Oh well, now I just have extra pillows and feel a bit disappointed. |
|
I just got mine today, too. I'm almost afraid to take it out because something tells me this might be too soft. It feels very similar to my Overstock topper, only without the convoluted side. You're right that it seems like it could tear easily. I sure wish they would have listed the ILD. I'm just concerned it's going to end up causing lower back pain like the other one. If I can be assured of folding it back up easily and getting it back into the bag, I might give it a try. I like the $39.99 price of the Overstock topper better. :) We'll see! I sure couldn't see laying on two of these stacked. I would sink in way too much. Lynn2006 wrote: My Brylane Latex Topper arrived and I opened it up to air it out and the smell is mild compared to a topper I was sent that had a glue seam and was 100% natural Talalay Latex that smelled so bad for several days. I will air it out a few days before trying it. It definitely is as soft as my Overstock topper and is fragile too since it just ripped. It is a little dirty but look like once I air it out it will be the right size for my bed. If it is a little big I may have to cut it so it will not bunch up since the 1.5" latex topper Dave sent me bunched up bothering me being slightly too big for the one I just sent back. But the one Dave sent me was sturdier and much nicer but had that glue seam and I think the glue seam bothers my allergies.</p><p>I can see I will not be putting my Overstock topper over this as I was hoping it would be a 32 ILD. I will see how it is compared to my overstock topper and report back to all of you. Then I can call Dave and let him know if I need one of the 36 ILD's exchanged for a 39 ILD so both sides of my bed are equal.</p><p>My Overstock Pillows arrived also but despite having just about no smell and being so white the natural latex is not any softer or flatter than the latex pillows I bought from them lat year. Their web site seemed to indicate it was so I was thinking I would be getting a lower profile pillow. Oh well, now I just have extra pillows and feel a bit disappointed. |