Mattress Forum

I will vist Essentia store here in the city and The Clean Bedroom that carries SavvyRest mattresses probably on Columbus day. 

So being the spingiest mattress out there is a good or a bad thing?

Good things - supportive, comfortable, long lasting

not so much - heavy, kinda pricey, DIY work putting all latex mattress together.
 

Just wanted to respond to this question again.  Hard to say one is more comfortable than the other really.  They feel different, but both very good.  Tempurpedic is on an adjustable base which is nice.

 - see below - 

I really wonder what they meant by this since they are not in the coil mattress business.  Iron itself is very cheap, so I could see the raw materials costs of really light weight spring systems being worth about the same.  Some high end spring systems are made by hand and can take many hours to construct, if you pay your workers a decent wage per hour you have a lot more expensive spring system.  When I research the current costs of steel, TDI (main chemical in polyfoam for north america), SBR or NR I realize that although some materials are more expensive than others, we are talking on a low end 50 cents a pound (bulk steel), to a high end of about $3 per pound (high quality natural rubber).  Even if you have a 100 pound queen mattress which is fairly heavy, the raw materials costs of the insides of a mattress would only vary up to $250.  The only things that could make a mattress truly expensive are high quality textiles and labour intensive builds.  Shipping/delivery costs are also an inherently expensive part of doing business these days,  marketing is also expensive.  

The only really expensive upholstery are things like cashmere, silk, horsehair, camel hair, anywhere between $10-$20 per pound.  Eiderdown is worth a staggering $70 per OUNCE....

Just want to give you a little heads up about Tempurpedic bed vs. my all latex bed.  It's been tough to discern this, but I've got the differences nailed down now.  The feel of each bed is totally different.  The all latex bed allows one to turn quite easily in it because it is so resilient and has an immediate springback nature.  But, that is also its disadavantage.  The center of the bed is a little more broken in than closer to the edge and that's normal because I think all mattresses break in more where you sleep the most.    The problem is when I roll more to the edge of the bed, the latex kinda sort of wants to push me back towards the center.   Yes, latex is very easy to turn on, but I don't get the feeling of being as securely in place as in the Tempurpedic.

The Tempurpedic also breaks in more in the center of the bed, but Tempur or memory foam just conforms from all directions wherever you're at.  So, I can roll right to the edge on the Tempurpedic and feel held in place and relaxed because of it.  I can move to any part of the bed and it will conform.  It's not as easy to move in the bed, but that's part of its strength - it holds a body in place so that one can relax.  Not that it is hard to turn in this Cloud.  So, the TP seems to have a lot going for it - good support, conformance, easy on joints, doesn't sleep hot, seems durable (my Symphony pillow was just like I bought it after 3 years), and for the slight odor, I'll hope it goes away and since it doesn't bother me now, I'll hope it's harmless as they say.

Good look. I don't want my mattress to move me. I wonder how long it takes for a latex bed to develop this. We sleep on innerspring now and had it for 12 years. It has a pillow top (I'm not sure why so many people have problem with pillowtops) but the mattress is still flat as a pancake. I'm not sure if it was just a quality mattress, our luck or combination of the 2, but I would not anticipate this kind of a problem with a latex bed. 

I still cannot bring myself to seriously consider TP after everything I've read about what they're made out of. Besides, from what I understand they're not really any cheaper than latex. I will try them out in a store though. I want to feel how they really wrap around you. I'm not a crazy eco guy, but from what I understand buying mattress made out of natutal latex (even if it's not 100% natural) helps the wild forrest and I'd like to help out whenever I can.

Regards,

-Tony.

P.S. I thought memory foam slept hot? Not so according to your testimony. Which ones sleep hot? I think I'm confused now. Hell, it seems like it's easier to buy a house than a mattress.

I think memory foam generally sleeps warmer than the typical innerspring mattress.  I was using the same 'ol comforter on a new innerspring in June.  Switched to an iComfort memory foam in July.  Like 2 nights into it, woke up at 4 am, got up,  tooo warm!  Ditched the comforter for a blanket as top layer.  Couple days later bought a nice quilt instead.  Quilts are maybe 1/4" thick.  I like it. 

Was still bit warm on icomfort, but that's because I was sinking in too much.  Got too greedy for an ultra plush mattress.  But the Cloud, not too warm.  Top sheet, quilt, 65 to 75 F room, no problems.  Tempurpedics have the convoluted foam single or dual channels which seem to work.

Caution with the really plush, sink down models of Tempurpedics.  Cloud Luxe is awfully soft.  Really don't know Cloud Supreme would have been too soft and cause neck probs for me.  Won't know.  Regular Cloud - fine.

The TP Contour Select and Signature have the slow reacting, original type Tempurpedic foam.  Had to pass on that.  Rhapsody is pricey, but has the Tempur HD foam.  Have to tune in to feel it, but that stuff conforms great. 

About the all latex.  Too bad what happened on the matching wood slatted foundation.  After first night, was quickly shopping for a thick mattress pad, next day shopping for memory foam topper .... not right.  New latex mattress, then shopping for memory foam topper? which didn't work out.  Mattress felt terrible to me on that slatted wood foundation. 

I didn't like the idea of squishy latex on a box spring, but it was the best thing going.   I tried latex couple nights, then Tempur couple nights. Latex felt off.

Maybe the setup on latex was just wrong.  I tried some Natural Mattress Store all latex mattresses and they felt awfully good in the store. I would have liked to get one, but they were really pricey, $2000 and up, and no return policy, only comfort exchanges.

How much is the TP Cloud Queen?

I'm planning to use my existing box spring as a foundadtion, so it sounds like you found this to be the best choice?

I agree, buying so much extra stuff just to make you feel comfortable after shelling out 2+ grands doesn't seem right to me. Which latex mattress did you go with, so you had to return it?

I'm afraid that when I go to a store, the mattresses will feel good but when I start sleeping on them they won't feel as good. Sort of like when you buy a TV set in a store and they all look vivid and awesome and you set it up at home and start wondering what the hell they did to the store TV to make it look so great. Besides, laying on a mattress for few minutes will never feel the same as spending the entire night on it. I think one of the major requirements for me would be ability to return it back (even if I lose some money on shipping or re-stoking or whatever fees they come up with).

Cloud Queen is $1599 and that price is same nationwide.  Retailers cannot discount TP prices (altough a few claim they got some money off their TP's)

You would not be able to use an existing or any boxspring with Tempurpedic mattress.  Their fixed foundations have a solid wood top, and using a box spring would void the warranty.  Queen foundation is $400.

My all latex mattress was from SleepEZ out of AZ.  I give them an A+ for customer service because they are the nicest people and they take care of business immeidately.  Unfortunately, the 10000 blended talalaly mattress just didn't pan out for me, even tried few different foundations.  Too bad.

Around SF Bay Area, Sleep Train and Mancini's are our biggest major retailers.  One has 100 day refund policy, the other 110 days.  Sleep Train is no restocking fee on refund.

Don't know if I mentioned this before, but be aware, that if you buy a mattress at a place that has a refund / or exchange policy, most likely if you do an exchange to another mattress, that will be a final sale, yours for good, no returns.  Did that once on the iComfort, not again.  Return only if I don't like a mattress.

So even though SleepEZ advertizes their mattress as 100% Natural Organic Latex (like here: http://www.sleepez.com/catalog/product_info.php/cPath/1_4_24/products_id/232/osCsid/54bat13vrokuef069cf6brhm61 ), it is blended latex? Interesting.

So the only reason you didn't like SleepEZ was because you were gravitating towards the middle of the bed after a while or was it something else?

Thanks for alerting me that layers exchange will void return policy. I had no idea about it.

$1,600 for TP + $400 foundation + taxes would make it almost $2,200 where  I live,  whereas I can get this one http://www.sleepez.com/catalog/product_info.php/cPath/1_4_25/products_id/227/osCsid/54bat13vrokuef069cf6brhm61 which seems to be top of the line (I do hope it's natural organic latex and not heavily blended one) on SleepEZ for $2,300 flat (I assume they don't charge you for shipping and I won't have to pay taxes cross state).Of course this isn't all about the money and I would definitely pay extra for comfort. I will try checking out TP next Monday. Is their foundation also covered by return policy for 100 days? If you return the mattress, I hope you don't get stuck with the foundadtion.

Regards,

-Tony.