Mattress Forum

The other night I bought a twin sheet set at walmart. Advertised as 300tc 100%  egyptian cotton. "Simply solids". The price was around $18.00.

At first these sheets felt a little scratchy. That was the 1st night. The second night(last night), I had no problem. I think anything I do to my bed requires at least one night to adjust. Tonight will be night #3. I'll see how that goes. Of course, as usual, for my wife Its lights out zzzzzzzz. Whatever happens. She'd probably do the same on a concrete floor..

But the hunt is still on, and thanks to this forum I finally feel like Im getting somewhere.

One question I havent seen addressed here is price vs quality. Does higher price, necessarily mean better?

The other interesting thing is the whole twin xl buisness. After much angst over shopping for that size, I got just desperate enough to try a regular twin. My mattress is 9' thick, so I got a twin that will fit "up to" an 18"thick mattress. The results, after washing(they shrunk a little), is that they fit. Not perfectly. But, after you spend several days looking for twin xl, you should be happy with twin regular. I am. This may change if there is more shrinking at the next wash. We shall see.

On the extreme end of high quality there really is no such thing as buying power in the equation....the price is driven by the demand and the limited quantity of the luxury goods.  A 300TC cotton fitted sheet in a queen can be anywhere between $15 or $350.  Is the $350 dollar sheet 23 times better?  Probably not, but it will be substantially better in every way.  So pricing is relative to quality but because of many circumstances it is not always directly proportionate.  I would argue that for the really discerning sheet afficionados that it usually is worth the premium for the best....it lives up to expectations.  If you buy a sheet that you are not happy with then you always paid too much no matter how good the bargain is...because in the end you will only have to repeat the process.

From an actual cotton exporter:

"Today Egypt is producing cotton in a wide range of qualities and staple lengths from 1.5/32” up to 1.1/2”. The following table gives a short overview of the available varieties:

All Egyptian cotton is handpicked and roller ginned (which is the best method to maintain quality) in order to preserve its unique fiber characteristics. The varieties Giza 87 and Giza 45 are among the finest types of cotton in the world. They are planted on a very limited scale and sold at a price about five times higher than prices for normal upland cottons.

For decades growing cotton has been an important part of the Egyptian economy. Cotton was Egypt’s number one export product for many years, and still remains a very important source of cash income for the Egyptian farmer. In the countryside, cotton is a way of life since the needs of the cotton plant during its vegetative cycle influence many aspects of the daily life of small farmers in the Nile Delta and the Nile Valley."

Just posting as an example....most cotton grown in Egypt just like other regions in the world is not actually true long staple cotton, if its from a registered long staple seed then the price is so much higher that you simply will not find a queen set of sheets below a few hundred dollars unless massively discounted.

Thanks for all the good info.

Two things: (1). If the sheet is not made from "real" Egyptian cotton, what could it be made of.( 2.) If its not real Egyptian cotton, how can they get away with saying that it is? 

Latest report on the walmart $18.00 sheets:

The sheets are  "ok".  Acceptable to me, at this point. I can lay on them and go to sleep.  Ive never owned a really high quality set of sheets, So  beyond that I wouldnt know the difference. But Iam tempted to splurge, just to see.

Consumer reports listed the 600tc Home(something) about $60.00 at target as top drawer.  Also someone reported here, in this thread, sheets at costco for about $90.00. Could you recommend a set that gets closer to the ideal, at a reasonable cost. Something a little bit special.

Thanks again.

basically the remainder of the cotton would most likely be american upland long staple as 90% of the worlds crop is this variety. 

"In the world marketplace, many cheap cottons are also being referred to as "Egyptian Cotton". If an Egyptian Cotton article seems to be a very low price, it is probably not genuine. There are three things to be aware of when you are purchasing Egyptian cotton linens. First of all, there are the contents - Some fabrics are labeled as Egyptian cotton when in fact they have a tiny percentage of genuine Egyptian cotton ~ say 5% or so. Second of all, the definition of "Egyptian Cotton" in some dictionaries is simply any finely woven cotton ~ this does rather leave the door open. Lastly, cotton grown in the country of Egypt may sound expensive and high in quality, but can be any variety. Since American Upland cottons (which are a much shorter fiber) now comprise 90% of the world's crop, it is a safe assertion that this might be in the package

Referring to the image on the right, the ivory colored sheet on the right sells for about four times as much money as the copper colored one on the left. They are both 300 Thread Count fabrics, both feel very nice and soft to the touch, and they are both labeled as being Egyptian cotton. You cannot normally see the difference, so the customer is left wondering why they should pay the higher price.

If you compare these same fabrics magnified many times, you can now see the difference. There is an enormous difference in the quality of these two fabrics. The genuine Egyptian cotton has a very smooth surface, with only an occasional tiny fiber raised from the surface. The copper colored fabric has many fiber ends standing up. It is obviously made from an inexpensive, short staple cotton, because of this "furring".

Both 300 thread count fabrics: One made with genuine Egyptian cotton (right), and the other made with cheap, short staple cotton (left).

The long fibers in Egyptian cotton have a lot more surface and length to "grab" each other, with a lot fewer ends to lift out of the thread. This makes the thread much stronger, and the resulting fabric much smoother and more resistant to pilling.

The long fiber of the Egyptian cotton means that there are very few breaks between the fibers when twisted into a thread. However the short fibers of cheap cotton mean that there are many breaks. There are a lot more fiber ends and these show up on the surface.

The short fibers in cheap cottons mean the thread will be much weaker, with a lot more ends to lift out of the thread. The resulting fabric will wear out much faster, and be far more likely to pill.

There are many other factors that will affect the quality of the fabric. These factors include: the way the thread is spun, the way it is woven, and the way it is dyes and finished. There are many technical variances. There are good methods, and there are cheap methods. "

I really think for the genuine article it is best to watch for a special deal on a brand that only makes the real deal....like Sferra, St. Geneve, Schlossberg.  Once in a while they will have a fabric they need to clear out and will reduce the price dramatically.  Even after discount it may not still be called cheap but it certainly would be a lot easier to justify the price difference.

Thank you.