a couple more questions- what is a good coil spring mattress, and assurance regarding topper depth
|
So I still haven't made up my mind on what I want to do. But I am leaning towards trying to find a so-called 'good' firm coil mattress with minimal padding and purchasing separate toppers. I have gone through most all the threads, several more than once. I see some talk here and there about doing this, but there don't seem to be a lot of recommendations on what makes for a 'good' coil spring and who makes it. Can I have some advice on that topic? Second, I feel very insecure about the 2-3" topper recommendation. Even at my healthy, non-obese female weight I feel concerned about that 2-3" is not enough padding. It seems like a body would just sink through that amount and feel whatever is underneath. I'm a side sleeper and right now, more than the body depressions we've got going on in our current mattress, the hardness is what is killing me, especially in my hips. My hip bones protrude and so I really need some cush there. Maybe some assurance? Does anyone find they need to go thicker? thanks, i appreciate your putting up with my journey for comfort. |
Re: a couple more questions- what is a good coil spring mattress, and assurance regarding topper depth
| 14 3/4 g very wimpy. |
Re: a couple more questions- what is a good coil spring mattress, and assurance regarding topper depth
|
mccldwll wrote: 14 3/4 g very wimpy. I thought it would be compensated by the high amount of coils (800 for the Queen size), wouldn't it? Sertas I tried in the stores usually have less coils (around 600 if I'm not mistaken) |
Re: a couple more questions- what is a good coil spring mattress, and assurance regarding topper depth
|
Do you have an Original Mattress Factory in your city? www.originalmattress.com They have 3 levels of innerspring mattresses with several levels of padding. The orthopedic firm has the strongest tempered coils (12 3/4 with 6 turns) and all their mattress are double sided. Their midlevel firm has more give in the coils and more to my comfort and liking than the hard orthopedic but both will provide years of service. Stay away from the entry level cheap ones--they are for children and guest rooms. Since they are flippable mattresses, you will double your wear. They are very reasonably priced as well. If you don't have these stores, the sealy coils and the strearns and foster are double tempered and therefore stronger; sealy has more per mattress but S & F have thicker gauge wire. If you choose a sealy, stay in the midrange where the queen is 14 gauge and over 800 in number. At that gauge any less number may give out before 10 years which seems to be a reasonable life expectancy. You probably don't want to buy from them but www.usmattress.com has clear info about all the S mattresses for the sake of comparison. Good luck! |
Re: a couple more questions- what is a good coil spring mattress, and assurance regarding topper depth
|
Leggett & Platt makes most coil springs. You can get an idea of what they are at this link.(below) I happen to have the LuraFlex open offset coils which are conforming, but also supportive. I didn't care for the individual pocketed springs like you see in Simmons. You'll see the different coils listed in red on the left of the page. http://www.beddingcomponents.com/innersprings.asp Serta uses a continuous coil. Many will have a variation of something you see here at L&P. McRoskey makes their own coils. LPAD wrote: So I still haven't made up my mind on what I want to do. But I am leaning towards trying to find a so-called 'good' firm coil mattress with minimal padding and purchasing separate toppers. I have gone through most all the threads, several more than once. I see some talk here and there about doing this, but there don't seem to be a lot of recommendations on what makes for a 'good' coil spring and who makes it. Can I have some advice on that topic?<BR><BR>Second, I feel very insecure about the 2-3" topper recommendation. Even at my healthy, non-obese female weight I feel concerned about that 2-3" is not enough padding. It seems like a body would just sink through that amount and feel whatever is underneath. I'm a side sleeper and right now, more than the body depressions we've got going on in our current mattress, the hardness is what is killing me, especially in my hips. My hip bones protrude and so I really need some cush there. Maybe some assurance? Does anyone find they need to go thicker?<BR><BR>thanks, i appreciate your putting up with my journey for comfort. |
Re: a couple more questions- what is a good coil spring mattress, and assurance regarding topper depth
|
If you have a minimally padded mattress and you used 2-3" of toppers, believe me, that will be plenty of padding. The mattress you buy doesn't need to be a block of cement. I think what people are trying to steer you away from is the type with pillowtops or super-plush. But, you can get a firm or even plush-firm mattress with a good coil system and still add a topper and it should be just fine. Myself, I don't like too deep of a topper. It causes my lower back to sink in too much causing pain. I don't like the feel of "squishy". One thing you might try to give it a really nice feel is a medium-soft latex topper (1-2 inches) and something I have called a CuddleBed Ultimate from Costco.com. It's a wonderful fiber bed type topper with an expandable fitted skirt. I put this over the latex or even just the mattress and it's VERY cozy and feels good on my side and my back. I highly recommend it. ********************************************** LPAD wrote: Second, I feel very insecure about the 2-3" topper recommendation. Even at my healthy, non-obese female weight I feel concerned about that 2-3" is not enough padding. It seems like a body would just sink through that amount and feel whatever is underneath. I'm a side sleeper and right now, more than the body depressions we've got going on in our current mattress, the hardness is what is killing me, especially in my hips. My hip bones protrude and so I really need some cush there. Maybe some assurance? Does anyone find they need to go thicker?<BR><BR>thanks, i appreciate your putting up with my journey for comfort. This message was modified Feb 29, 2008 by BeddyBye
|
Re: a couple more questions- what is a good coil spring mattress, and assurance regarding topper depth
|
Hi LPAD. I have what I believe is a "good" coil mattress such as you are describing, a Shifman Rembrandt. It's filled with nothing other than tons of cotton and a very thin layer of latex on each side then tufted through. As a result it is very firm; in fact when I first got it, it was uncomfortable to sleep on without an additional comfort layer. But that was my plan anyway, and I soon got both a thick wool topper and a 2" med/soft latex topper which I use interchangeably. Had the mattress almost two years now and it looks more or less like it did the day I bought it, although it's softened up a bit. Still want a topper though! As for toppers, I couldn't imagine going with more than 3" of anything; part of the reason for getting that firm mattress was to "feel" it below the comfort layer, that's what feels good and works for my back. If you really don't want to feel any hardness have you considered a full-on latex mattress? I had one and despite much effort could not achieve the firmness I needed (also, I can personally vouch for FloBeds willingness to please and no-hassle return policy). Otherwise, another coil mattress you might look at is McRoskey; they are also comprised mostly of cotton but offer different firmness levels. There were many posts about both Shifman and McRoskey on the old forum if you search. There are lots of smaller, independent mattress makers scattered around the country too that may have similar offerings, and probably for a lot less $$$. May be worth it to see if there are any in your area to check out. Lastly, if you do decide to try a firm coil mattress there's no rule that you have to stop at 3" of topper. Pile 'em on till it feels good! :-) Good luck! |
Re: a couple more questions- what is a good coil spring mattress, and assurance regarding topper depth
|
That depends on the coil. The LuraFlex is around 14-14+ BUT there are lot of smaller coils in the system. And they are meant to be conforming as well as supportive. The old Bonnel is one of the firmest coils when you get into the 12-13 range. BUT, they aren't always as durable in the long run. I've heard that other coils will last longer. mccldwll wrote: 14 3/4 g very wimpy. This message was modified Mar 1, 2008 by BeddyBye
|
Re: a couple more questions- what is a good coil spring mattress, and assurance regarding topper depth
|
I'd feel more insecure about getting the right mattress and less about the toppers. Once you have the correct foundation--the mattress itself--that provides the correct level of support for your body you can always tweak the toppers to get the comfort level right. Sometimes this is a matter of mixing several different materials. You sound a lot like me in that I had an extra firm mattress that was killing my hips. I kept adding toppers over the year starting with a fiber pad--thicker than a mattress pad but not as thick as a fiber bed. Then I added an eggcrate foam topper. Then another one. Eventually that still wasn't enough and I got a 2" 4lb memory foam topper. That was about 4" of foam over the fiber pad which had compressed and flattened out over the years. At first it felt heavenly. No hip pain! I could sleep all night and wake up in the same position. Amazing! But after a few days my lower back started to hurt and I suspected there was just too much foam on the bed undermining the firm support of the innersprings. I removed just one of the eggcrates and that was perfect. 3" of mixed foam over the fiber pad was my ideal comfort level. The amount of toppers you are going to need depends on the mattress you end up with and at what point you hit your comfort level. I like to use toppers in 1" increments since it makes it easier to fine tune the comfort level. Sometimes 2" or more of a single type of foam is just too much. 1" can actually make a big difference in how your body reacts to it all. You can always add more, but you can't do anything about it if you get a 3" topper that proves to be too much. |
Re: a couple more questions- what is a good coil spring mattress, and assurance regarding topper depth
|
LPAD wrote: So I still haven't made up my mind on what I want to do. But I am leaning towards trying to find a so-called 'good' firm coil mattress with minimal padding and purchasing separate toppers. I have gone through most all the threads, several more than once. I see some talk here and there about doing this, but there don't seem to be a lot of recommendations on what makes for a 'good' coil spring and who makes it. Can I have some advice on that topic? Second, I feel very insecure about the 2-3" topper recommendation. Even at my healthy, non-obese female weight I feel concerned about that 2-3" is not enough padding. It seems like a body would just sink through that amount and feel whatever is underneath. I'm a side sleeper and right now, more than the body depressions we've got going on in our current mattress, the hardness is what is killing me, especially in my hips. My hip bones protrude and so I really need some cush there. Maybe some assurance? Does anyone find they need to go thicker? thanks, i appreciate your putting up with my journey for comfort.
For example, I have 1" of super hard foam above my springs, then 1" of firm foam, then 1" of medium foam... THEN 2-3 inches of soft foam or other padding for comfort. So all together I am using about 5-6" of foam above my springs. If you don't use springs then you will need a 4-6" base of good quality firm foam as a base instead of springs. |
Re: a couple more questions- what is a good coil spring mattress, and assurance regarding topper depth
|
Exactly! And, I even have less than that. My husband is 6' 1" and over 200 lbs. and he has no problems with sinking in or feeling the coils. Over my LuraFlex coils I only have a total of 3 inches of foam and the fiberfil quilted cover. My husband even has about a half inch less. And, we have no issues with it not being able to support our bodies or sinking in too far. I tried putting a few inches of topper and it was TOO soft. Last night I tried the Dream Coil which is about an inch or so of PU foam and I like the way that one feels. But even without it, our bed feels just fine with 3 inches of latex and foam over the coils. ************************************************* jimsocal wrote: Please understand that the "no more than 2-3 inches" rule is for SOFT topper material, not for overall foam. </p><p>For example, I have 1" of super hard foam above my springs, then 1" of firm foam, then 1" of medium foam... THEN 2-3 inches of soft foam or other padding for comfort.</p><p>So all together I am using about 5-6" of foam above my springs. </p><p>If you don't use springs then you will need a 4-6" base of good quality firm foam as a base instead of springs. This message was modified Mar 3, 2008 by BeddyBye
|