Discouraged... Does latex break in a lot after a week or two?
|
I thought I FINALLY had my mattress problems solved. My mattress was PERFECT for the first 2 weeks... Then, about 3 nights ago it started to hurt a little. I figured it was just ME... (though I had not done a lot of work - I did a lot of back work the previous days and slept great through those days... But now for the past 3 nights I have had substantial back pain when sleeping. Not as much as before the new latex layer, but enough to make the last few hours of sleep a bit painful. So did the latex "break in" in 2 weeks and is now too soft for me? Or what? Or did the back work I did the previous week take a week to catch up to me? I think I might have to change my configuration after thinking I had it perfect... Ideas? I am very discouraged by this. I REALLY thought I had it right, finally; I had great comfort for 2 weeks! |
Re: Discouraged... Does latex break in a lot after a week or two?
|
adjustable beds, like the ones that go up so you can read or watch tv they are the answer for all of us, you can adjust so there is no pain, but the cost is nuts |
Re: Discouraged... Does latex break in a lot after a week or two?
|
Saturday afternoon I took off the wool layer. But Saturday night I continued to have pain in my back during the night and upon awakening - again, not terrible pain but "too much" in any case. I stuck with it anyway. Sunday night I had much less pain, though still some. I am beginning to wonder if there is something I do or don't do different from time to time that causes this back pain or if it is the mattress? I am suspecting that one thing might be the LaZBoy I sit in while watching movies, for example... I'm going to start keeping a diary of my sitting and other activities that could negatively and positively impact my back and thus my sleeping, and see if there is any corralation. |
Re: Discouraged... Does latex break in a lot after a week or two?
|
I have heard of people sleeping in the recliners when they have back pain (my neighbor). So I don't think that is it. Have you noticed you are waking up and find yourself almost like a pretzel? I mean laying on your back and kinda laying on your side? I had that this morning and my back is killing me! |
Re: Discouraged... Does latex break in a lot after a week or two?
|
Years ago, when I first started noticing that I had low back pain, I found that it wasn't just my mattress that caused it...chairs, couches, even the seat in my car all contributed to it. I got rid of couches, chairs and had my car's seat re-done(not as expensive as you'd think). Helped a great deal. Right now, my bed is the best support in the house. One couch(X-Soft HR foam, thick cushion)hurts my low back, my art-deco chair I had reupholstered(the custion has XXSoft HR foam) KILLS my low back, and the recliner in the other room has worn the seat to the point it is too soft(sinks too much, looks fine) and hurts my back. I had our wonderful, three year old couch re-foamed last winter to the tune of $500...it has cushions and then a smaller one on top....tried to get the gal to replace the EXACT density of foam that it had in the first place...but it is firmer. She used medium HR foam and it is solid. My back is bothered by sitting too long on there too...my hips go to sleep. It was so perfect for three years, then the cushions sunk too far and I could start to feel the metal pieces in between the sections. I did not replace the center cushion, the curvy piece because it is always covered in pillows and no one sits there....it is still wonderful. I think you have to cover all your bases to get relief. Even if everyone thinks you are weird. Right now I am sitting on a hard seat chair that was my dad's...all foam died a long time ago...I put a little chair cushion on top and I am happy. My family wonders why I don't use the big, cushy, desk chair that I've pushed into the corner...but that hurts my back. Most people just don't get it. Kait |
Re: Discouraged... Does latex break in a lot after a week or two?
|
Kait, I just was reading this website on hip pain and chairs and furniture click here It explains it all so clearly, now if I can find some flat chairs. I have been sitting on a contour chair and it pushes up on my hips, where the bursa is and the pain is extreme. I reupholstered my office chair a few years back due to the contour chair and put firm foam, and it is improved. But I see my expensive recliner and couch the foam has butt mark! So that foam has broken down. This would never had happen before companies decided to put cheap foam in. This is an expensive recliner I paid $1000 or more for several years ago. So I am thinking of getting a Bevco chair that has a flat seat and putting my own padding on it. They sell that. Made in USA. Then I will work on my mattress some more. This message was modified Feb 20, 2010 by Leo3
|
Re: Discouraged... Does latex break in a lot after a week or two?
|
This is the best stuff EVER! For years I have been telling my kids my toilet seat was killing me. They laughed their asses off. I just put wood in my Pottery Barn, overstuffed rocker, bingo, the neck pain stopped. What a wonderful piece of information. Working in a Health Club, I am gonna blow em' out of the water Mon morning! Alice |
Re: Discouraged... Does latex break in a lot after a week or two?
|
jimsocal wrote: I thought I FINALLY had my mattress problems solved. My mattress was PERFECT for the first 2 weeks... Then, about 3 nights ago it started to hurt a little. I figured it was just ME... (though I had not done a lot of work - I did a lot of back work the previous days and slept great through those days... But now for the past 3 nights I have had substantial back pain when sleeping. Not as much as before the new latex layer, but enough to make the last few hours of sleep a bit painful. So did the latex "break in" in 2 weeks and is now too soft for me? Or what? Or did the back work I did the previous week take a week to catch up to me? I think I might have to change my configuration after thinking I had it perfect... Ideas? I am very discouraged by this. I REALLY thought I had it right, finally; I had great comfort for 2 weeks! And this is why I hate latex. IMO, inexpensive, 2.8/ft3 density, traditional poly with an ILD of 35, topped with 2" of 5.3/ft3 Sensus is the only choice for those with back trouble. Who cares if you have to drop $600 for new poly/memory foam layers every 3 years? Latex is overpriced and overrated. This message was modified Feb 20, 2010 by Pete
|
Re: Discouraged... Does latex break in a lot after a week or two?
|
Pete wrote: And this is why I hate latex. IMO, inexpensive, 2.8/ft3 density, traditional poly with an ILD of 35, topped with 2" of 5.3/ft3 Sensus is the only choice for those with back trouble. Who cares if you have to drop $600 for new poly/memory foam layers every 3 years? Latex is overpriced and overrated. Doesn't memory foam and poly foam break in as well? |
Re: Discouraged... Does latex break in a lot after a week or two?
|
Slides wrote: Doesn't memory foam and poly foam break in as well? I think he is saying they break in but they cost a lot less to replace, and I would agree to some extent... BUT: I think latex breaks down much less and slower, over time, than other foams. I don't think MOST people would even feel the breaking in that my latex seems to have done. However, for me, it was enough to go from 100% comfort down to only about 70-75% comfort, now. Of course I still do have some HR foam on my bottom layer so that could be the problem. But I hate to buy new foam right now so I'm trying to live with my current configuration (above; minus the wool) and see if I "get used" to it. I also think latex and HR foam have completely different feels and different type of support. The latex is much springier, the HR is more of a "dead" type feel. I used to hate the latex feel but am now getting used to it, I think. I do think that a huge part of my back problems are from sitting watching movies. Unfortunately I have bought several "for your back" type chairs and all of them hurt my back! Also I just plain sit too much, here, there and everywhere! I have become almost totally sedentary and I know that's bad and I am working on that. Not sure what to do about sitting. Can't really afford to buy a chair right now... I'm going to look at that link Leo or someone posted above, though... |
Re: Discouraged... Does latex break in a lot after a week or two?
|
jimsocal wrote: I think he is saying they break in but they cost a lot less to replace, and I would agree to some extent... BUT: I think latex breaks down much less and slower, over time, than other foams. I don't think MOST people would even feel the breaking in that my latex seems to have done. However, for me, it was enough to go from 100% comfort down to only about 70-75% comfort, now. Of course I still do have some HR foam on my bottom layer so that could be the problem. But I hate to buy new foam right now so I'm trying to live with my current configuration (above; minus the wool) and see if I "get used" to it. I also think latex and HR foam have completely different feels and different type of support. The latex is much springier, the HR is more of a "dead" type feel. I used to hate the latex feel but am now getting used to it, I think. I do think that a huge part of my back problems are from sitting watching movies. Unfortunately I have bought several "for your back" type chairs and all of them hurt my back! Also I just plain sit too much, here, there and everywhere! I have become almost totally sedentary and I know that's bad and I am working on that. Not sure what to do about sitting. Can't really afford to buy a chair right now... I'm going to look at that link Leo or someone posted above, though... floeds? is that what you have? i may end up back with the 10 inch costco sleep science foam bed, called emma i think |