|
Ok, relating my most recent DIY mattress experience and wondering if I'm nuts ... In another thread I describe disassembling an old latex+eggcrate Englander mattress and ending up with a 6" slab of latex - no idea what type, quality, or ILD. It was definitely too hard to sleep on by itself, so I've been experimenting with toppers - starting with 1" (single and folded double) of FBM 20ILD latex. Meanwhile, GF asks me to configure a bed for her. So I buy 3" of FBM LUX-HQ and 3" of HD36-HQ. Slept on it with the 1" 20ILD topper I bought for my latex core, and I liked it a LOT. Basically, the core of the two 3" pieces of p/u foam is vastly better for me than my 6" piece of latex from the old mattress. The latex not only feels uncomfortably harder, it is also less supportive and gives me a backache. The kicker for me was having a pretty bad flare-up of lower back pain while doing all this, and spending a night on an old non-foamcore futon in a spare bedroom. Feels hard as a rock initially, but feels better after you've been on it awhile (sorta the way I've heard memory-foam described). Spending the night on this futon made a night-and-day difference in my backpain, virtually curing the flare-up overnight; I've noticed this before with the old futon, so there's little doubt in my mind that the old latex (with either the old eggcrate topper or the 1" 20ILD latex) is problematic for my back. So it would appear that the $200 worth of p/u foam makes a much better core, for me, than whatever kind of latex is the 6" slab from my old mattress. Am I nuts ? If not, this is good news for those agonizing over whether to spend the big bucks for all all-latex mattress, versus a p/u core with latex topper. And if you get the HQ latex, the lifetime is supposedly 12-18 years. P.S. If anyone is near central NC, I can make you a deal on a 6" latex core ... This message was modified Nov 27, 2011 by RustyShackleford
|
|
sandman wrote:
I don't think I would add 2" of memory foam if you have back issues. The downside of memory foam is that it does not really provide much support. So, your heaviest areas will compress it almost completely. It is really just for comfort, and will help if the mattress is too firm. If you are still looking for comfort, you might want to try 1" on top of your softer latex. Hard to find quality 1" pieces now a days, and yes it can also make it a bit hotter if you are sensitive to that. If you got rid of the HD36 then you might be able to use more than 1" of memory foam, but you might sink through the top layers and feel too much of the firmness of the LUX. Usually it is good to have some intermediate firmness foam in between the firm base and the soft comfort layers. Most foams will break in a bit and get softer, and then gradually lose some support over time. Pillowtops are usually made out of PU foam, and those definitely lose their support. It will be somewhat dependant on the quality/density of the foam you have. I think you tried to get fairly good quality, so that will make it last longer. Some of the PU used by the S brands is cheap real low density stuff, and it just does not last. I am not sure if the firmer PU foams last longer than the softer ones, but I think they might. One of the advantages of latex is that it will stay more consistent over time. I think I can deal with the comfort issue by either another 1" of the 20ILD FBM latex (I'll test by folding over my existing piece soon), or a softer 1" from SLAB (expensive, of course). I've thought of trying some zoning too (if I get a piece of the softer stuff). I ordered (and hopefully got) the -HQ PU foam from FBM, which they claim lasts 12-18 years; no idea how to distinguish between it and the -R product, which is only 5-8 years. I'll guess I'll rotate it regularly (not hard to do with two 3" slabs plus the toppers) and keep a weather eye out for loss of support. Even if it's good for 10 years, that's still ahead of the game on a latex base. I would love to make my 6" latex work as a base, but I think it's a non-starter, given it makes my back hurt and I'm almost certain that's not due to too much support. |
|
RustyShackleford wrote:
I think I can deal with the comfort issue by either another 1" of the 20ILD FBM latex (I'll test by folding over my existing piece soon), or a softer 1" from SLAB (expensive, of course). I've thought of trying some zoning too (if I get a piece of the softer stuff). I ordered (and hopefully got) the -HQ PU foam from FBM, which they claim lasts 12-18 years; no idea how to distinguish between it and the -R product, which is only 5-8 years. I'll guess I'll rotate it regularly (not hard to do with two 3" slabs plus the toppers) and keep a weather eye out for loss of support. Even if it's good for 10 years, that's still ahead of the game on a latex base. I would love to make my 6" latex work as a base, but I think it's a non-starter, given it makes my back hurt and I'm almost certain that's not due to too much support. |
|
RustyShackleford wrote: from SLAB (expensive, of course). I'm sorry, but what company is SLAB? (I have been able to decipher most other acronyms, but can't find a reference to SLAB) |
|
cwier60 wrote:
I'm sorry, but what company is SLAB? (I have been able to decipher most other acronyms, but can't find a reference to SLAB) |
|
sandman wrote: Sleeplikeabear.com Of course! Thanks. |
|
cwier60 wrote:
Of course! Thanks. |