|
OK, I mentioned in a few other threads that I had ordered a Dunlop topper from SleepEZ, with the plan to upgrade to their complete 3-layer mattress if I liked it. And I promised I would post when I got the topper, so here goes... We ordered the Cal King topper split soft / medium; soft for my petite wife (who can sleep anywhere on anything), medium for "not quite as petite" We put it on our (hated!) Tempurpedic a few nights ago. My wife likes her soft side fine, but she likes pretty much anything. To me, my medium side feels a little too firm (barely ok for back sleeping but too firm for side sleeping). I talked to Sean and he said the Tempurpedic combination of firm foam and unheated (because of the layer of latex on top) memory foam would likely be firmer than what he would suggest - maybe the same as 2 layers of extrafirm latex. Initially he had suggested I get a firm / extrafirm to go under my medium, but after talking he suggested I go with medium / firm to get a little softer feel. He didn't want me to go with a soft topper since he didn't think that would hold up well for me. So I ordered the full mattress today. For those of you who don't know about the "upgrade" deal, here is how it works. You order the topper (and you get to try it out before you commit to a full mattress). Then you order the bed you want at the price of the next bed down. This ends up being cheaper than buying the mattress outright. For me that meant: 1) Order cal king topper for $395 So you get to try before you buy and you save money - win win! I will update again here when I get the mattress... Steve |
|
Mimi wrote: Steve, I talked to Shawn and I think he pretty much recommended the exact same configurations for my husband and me. So, I took the plunge yesterday (although I don't think it's been processed yet because haven't received a call back). From what I've read the "soft" in Dunlop at SleepEZ is 28, which sounds kinda hard to me. In Talalay the "soft" is 22-24 so does that mean they just can't make the Dunlop any softer? Anyway, what did you think about the Dunlop "soft" - was it soft enough for a comfort layer? I realize that's a subjective question but I guess I'm just a little anxious. Have you gotten the rest of your bed yet? Once you make the decision you want it RIGHT NOW don't you? Like a kid at Christmas...... Mimi Well we just got the rest of the mattress on Friday - without the cover, apparently they are moving and the box with the cover got misplaced. So we built the bed without the cover and put our wool topper over it. I don't know if the cover will make a difference, but as is I would have to say it feels pretty firm. Maybe too firm - I'm not gonna decide based on 1 nite. I think in general SleepEZ is a little firmer than others, I don't know if thats a Talalay / Dunlop thing or just a SleepEZ vs others thing. Anyway, I don't even have a "Soft" layer - I have 2 mediums over a firm. My wife has a soft over medium over firm, and I think even her side feels too firm, but I haven't slept there. Shawn did say if things were too firm he could sell me the 1.4" soft Talalay topper and that it would fit into the cover (tight at first but would loosen up). So that may be an option. I would definitely talk to Shawn again before doing that tho - it may be that I could swap my firm for a medium or a soft and that might fix things for me. I will post back as things progress... Steve |
|
Uh oh, you got med/med/firm and it's too hard? He recommended med/firm/xfirm for my husband and he's about your same weight! The order won't actually be placed officially until tomorrow morning when they call me from the factory so it's not set in concrete (no pun intended). We do like firm beds but not like a rock! Did he say how much the 1.4" topper is? Or what ILD? Keep us posted on your saga. Thanks! Mimi |
|
Mimi wrote: Uh oh, you got med/med/firm and it's too hard? He recommended med/firm/xfirm for my husband and he's about your same weight! The order won't actually be placed officially until tomorrow morning when they call me from the factory so it's not set in concrete (no pun intended). We do like firm beds but not like a rock! Did he say how much the 1.4" topper is? Or what ILD? Keep us posted on your saga. Thanks! Mimi Yes I feel its too firm for me, based on 2 nights now. But thats certainly subjective. I wouldn't say its like a rock - if you like firm you would prbably like it. I sleep mostly on my side and don't especially like firm mattresses, I only got this firmness because I was afraid that anything softer wouldn't last. Are you not going to try the topper before you buy? I actually felt like my medium over my Tempurpedic was too firm but I ignored my concern because I figured the latex base would be softer than the Tempurpedic base. I dont think it is. In fact this stack of 3 latex layers feels pretty similar to the 1 layer over the Tempurpedic. So testing with 1 layer was probably a good idea, but I should have listened to my gut and ordered softer based on that test... The 1.4" (Talalay) or 1.5" (Dunlop) toppers are half the price of the full toppers, so I think like $200 (king). You can buy soft or medium. I am actually thinking of buying the FloBeds topper if I decide I need one - people seem to love that one in the bed; I don't know if its sold separately but I would guess it is... Steve |
Steve, I was going to try the topper first like you did, but decided it would probably be hard to judge with just the one layer anyway. Plus I wanted to get the bed as soon as possible so I can be done with it and hopefully find comfort without going through too many exchanges (our daughter is about to have our first grandchild in 2 weeks and I just know I won't want to be dealing with all this then!). So I went ahead with the med/firm/xfirm for my husband's side. We'll see how that goes. Another site that has 1,2, or3" layers with free shipping is: http://www.foambymail.com/index.html. I have never ordered from them so don't have any idea about them. I'm not sure, but I think I've seen somewhere on this forum that flobeds won't sell just the layers but maybe I'm wrong on that. I hope you can get your mattress comfortable as soon as possible. I'll report on mine when it gets here - unless I'm busy with our other new addition !Anybody else out there with Dunlop, feel free to jump in here with your comments! Mimi |
|
I finally received the cover for my mattress. It is nice and soft and makes the latex a bit softer, but, even with my existing wool topper, I still feel like it needs another few inches of softness. I don't know if its because I got the Dunlop, but the latex to me does feel sort of jiggly and hard - as someone else said it feels like its pushing back. That doesn't surprise me, and I always felt that there was a good chance I would decide to add another top layer, to make the mattress more like what FloBeds offers. I checked with them and they do sell their convoluted latex topper, but its expensive ($350 for Cal King), so I decided to just try a poly foam convoluted topper (for about $90) to see how that works. I ordered that today from Foamorder.com (2.5", 2.0 density, 30 ILD). I'm hoping that does the trick. I will report back when I get the new topper... Mimi, let us know how your mattress experience is coming along! Steve |
Sorry to just now be reporting back. Our grandbaby came 8 days early and I've been kinda busy getting to know her  . Don't worry, I won't post pictures. Anyway, our SleepEZ 10,000 arrived a week ago (very fast shipping) and of course we set it up that night. I guess it took us about an hour. To review, we ordered the 100% natural Dunlop, as we like firm mattresses! My side is soft/med/firm and my husband's is med/firm/xfirm. I was afraid this might be TOO firm since Dunlop is a denser, firmer feel. Well, we couldn't be happier! I think we'll be able to stick with this configuration without having to do any swapping. It's SO comfortable, not hard at all, just the right amount of "give". I do want to get a solid or slatted foundation. Right now it's just on our old (but not too old) box springs, and I don't care for the bouncing around feeling. So as soon as possible I'll scout around and find just a plain wood foundation and try that. I'll post a nice review in the review section as soon as I can.Steve, did you ever get yours where you wanted it? Mimi |
|
Mimi wrote: Sorry to just now be reporting back. Our grandbaby came 8 days early and I've been kinda busy getting to know her . Don't worry, I won't post pictures. Anyway, our SleepEZ 10,000 arrived a week ago (very fast shipping) and of course we set it up that night. I guess it took us about an hour. To review, we ordered the 100% natural Dunlop, as we like firm mattresses! My side is soft/med/firm and my husband's is med/firm/xfirm. I was afraid this might be TOO firm since Dunlop is a denser, firmer feel. Well, we couldn't be happier! I think we'll be able to stick with this configuration without having to do any swapping. It's SO comfortable, not hard at all, just the right amount of "give". I do want to get a solid or slatted foundation. Right now it's just on our old (but not too old) box springs, and I don't care for the bouncing around feeling. So as soon as possible I'll scout around and find just a plain wood foundation and try that. I'll post a nice review in the review section as soon as I can.Steve, did you ever get yours where you wanted it? Mimi
Steve |
|
"Sinking into your eyeballs" made me laugh... Been there with the 5" of memory foam myself. You never want that sinking feeling again. I bought a cheap Carpenter polyurethane topper that has a 3 year warranty (yeah right) and wondered what makes the topper you got more expensive and better? I wonder if I will have to end up getting what you got so it will last, and perhaps feel better on the shoulders. My hips don't have the pain I use to get. How did you chose that topper. Congratulations on your new bed and hope you will both be happy with it now. What did you do with the old bed? That is the problem of what do you do with the old one? |
|
Leo3 wrote: "Sinking into your eyeballs" made me laugh... Been there with the 5" of memory foam myself. You never want that sinking feeling again. I bought a cheap Carpenter polyurethane topper that has a 3 year warranty (yeah right) and wondered what makes the topper you got more expensive and better? I wonder if I will have to end up getting what you got so it will last, and perhaps feel better on the shoulders. My hips don't have the pain I use to get. How did you chose that topper. Congratulations on your new bed and hope you will both be happy with it now. What did you do with the old bed? That is the problem of what do you do with the old one?
I put the Tempurpedic in a guest room. I didn't like it but a lot of people do, and guests seem eager to try it... Steve |
|
Do you have a mattress cover on it? I have tried 3 different mattress covers and they change the toppers to being hard on my hips. Does the poly topper have annoying bumps, or are they milder not aggravating bumps? The one I got has little mounds and waves, not to annoying. Overall you do like the mattress and the cover that it came with? I know it all takes time to get use to something new to sleep on. |