|
I would like to know what some of the pros & cons are of sleeping on a latex mattress, especially in the kit form from a company like Flobeds (I have samples of the different latex cores from Flobeds). I understand that issues with comfort of latex depend on ILDs, a person's body type & weight, personal preferences, etc. The only type of mattress I've slept has been an innerspring (with no latex). It's hard to tell by laying on a latex mattress in a store what the mattress will feel like to actually sleep on. What is the difference in feel between sleeping on an all latex mattress and on an innerspring mattress? Does a latex mattress provide enough support for the lower back and hips, or is a latex mattress not a good choice for providing good back support? Does a latex mattress provide a good seating surface if you want to sit up in bed to read, or does your butt sink down too much for it to be comfortable enough to sit up in bed? With kits such as Flobeds that don't have a firmer edge support around the mattress to support sitting on, do you just sink in when you sit on the side of the bed? Can a latex mattress feel like you are sleeping on a piece of "dead" foam, "dead" meaning no cushiness, no springiness to the foam? Thank you very much for help and opinions. I've been reading this site (and old one) for over a year now, and I'm still learning. |
|
Lynn2006 wrote: Dave at FloBeds.com did send me a 1.5" Dunlap Topper and it was too firm for me Lynne, what was the ILD of that Dunlop topper? Was it a blend, or 100% natural latex? |
|
Glad to see the informative posts about latex. It's been really interesting to read the analysis of the differences between the kinds of latex. I think all the Talalay mattresses we tried locally were 5.6" cores with other "stuff" on top. We might have liked Talalay better if it had been layered properly. We love our 10 inch three layer Dunlop mattress but it feels very much like the six inch 32 ILD cores we got each of the kids. The Dunlop is definitely denser on the "bottom" than the "top". I wonder if the designation of 32 ILD is an average approximation of the feel of the whole core. The only negative we can see with the 6 or 7 inch mattresses is that modern sheets are too big for them. My impression is that it is fussier (can't think of a better word) to get the proper combination of comfort and support with Talalay but if you do it can be very good. OTH, Dunlop might have other down sides but is a little easier to get the right firmness. Our experience was that we could not find Dunlop as easily as Talalay - especially locally. It seemed that much of the information we found proclaimed the universal superiority of blended Talalay and a onlly few sources felt Dunlop was at least equal to Talalay. Maybe low quality Dunlop has given all Dunlop a bad name. |
|
I think thisthread has already pretty much covered it, but I'll add my 2 cents into the mix anyway. Talalay latex in medium to firm densities just "pushed back" too much on my back. It did not feel at all relaxing to me. Although I have not SLEPT ON Dunlop latex, my impression from laying on it was that it does not push back this way - it's more of a "dead" foam, but with support, not like visco or memory foam which does not push back enough, and does not provide support - I don't care what Tempurpedic says. Also, visco or memory foam wears out fast and becomes softer, less supportive over a relativeily short period of time. Back to latex: It provides excellent support. The question is: will you like the type of support it gives? And will you like the "push back" of Talalay vs the less pushy feel of Dunlop? There is no way to answer this. You have to just try it, and really you cannot tell a lot from just laying on it in a store, you have to sleep on it. This is why a place like flo-beds is so good because for just the risk of shipping it back, you can try it out and see if you like it. And you have so many different combinations to be tried (for a little more investment in shipping - shipping the layers back to them and vice versa)... So unless you just hate latex, you should be able to find a combination that works for you. They are betting on this, and since they've been in business a long time, it's obvious that their bets on this are paying off. We were one of their bets that did not win. I just did not like the way Talalay felt as a main core. Had it been over springs, or had it been Dunlop instead of Talalay, we might have been able to make it work. I'm not sure - does Flo-beds offer Dunlop as part of their layering? If they did, I don't think they offered it to us years ago as we did not try it. We did try various combinations of firmnesses or ILD's, and some with a memory foam topper, but we just did not like the feel. What I have found recently, however, is that I can tolerate Talalay in a very soft, low ILD. In the very low ILD's it does not feel like it is pushing back so much, it feels more like sinking in, yet not like the sinking in of memory foam. The bottom line is that you just have to try it and for trying it, Flobeds is a very good company to try it with. Although it won't give you the true feeling of sleeping on a 100% latex mattress, you could try buying one of the 1" latex toppers from Brylane and see if you like how that feels. It will at least give you some idea. But of course a higher ILD that a core is made of feels much more bouncy and pushes back more than this topper will. (see the thread(s) on Brylane's topper deal.) Oh, and the other thing is, that as someone else said, you may like the feeling of latex over springs or over some type of adjustable slat frame, but not like it by itself on the floor or on a platform. We are now building our own mattress over old Sealy springs because I do not like the feel of foam by itself that much. If I were to buy a whole new latex bed, I think I'd want one over springs. (By the way, who sells a component style latex mattress over springs??) |
|
Lynn, I just went to FloBeds and I can't find where they sell Dunlop at all. I would love to try a 1.5 inch Dunlop processed latex topper to give it a try. Does he have these on hand but just doesn't advertise them? I might have to contact him to ask. Lynn2006 wrote: Dave at FloBeds.com did send me a 1.5" Dunlap Topper and it was too firm for me and I did not like the feel at all. I prefer Talalay Latex so for. I can see that a bottom base of Dunalap latex may be good but my 44 ILD solves that problem. I have not tried layers of Dunlap latex under a a softer talalay topper so I can't comment there but the Dunlap latex topper exerted more pressure points for me and I just preferred my 1" soft Overstock Talalay Latex Topper that gave just a tiny bit of cushion. I still wish my bed was zoned but so far this is the best for me and each person is so different. |
|
I noticed when I was buying my zippered coil and latex mattress, my mattress guy had a firm Dunlop latex mattress without any springs on display. It looked like a thick, firm core with softer layers glued on top. I wasn't paying a lot of attention since I wasn't interested in that type at the time. He said it was from Dunlopillo. Interesting website and history: http://www.dunlopillo.co.uk/ |
|
Here's another website featuring Dunlopillo: http://www.dunloplatexfoam.com/ BeddyBye wrote: I noticed when I was buying my zippered coil and latex mattress, my mattress guy had a firm Dunlop latex mattress without any springs on display. It looked like a thick, firm core with softer layers glued on top. I wasn't paying a lot of attention since I wasn't interested in that type at the time. He said it was from Dunlopillo. Interesting website and history:<BR><BR>http://www.dunlopillo.co.uk/ |
|
I noticed that this site talks about the Talalay process, though. <;---? My mattress guy uses Talatech talalay from Latex International for his layers he uses inside the custom mattresses. But, he said this other all-latex mattress came from this company, Dunlopillo. Now I'm confused. I assumed it meant that it was from the Dunlop process. I'll have to ask him next time I talk to him. ****************************************************** Here's another website featuring Dunlopillo: http://www.dunloplatexfoam.com/ This message was modified Feb 3, 2008 by BeddyBye
|
| BeddyBye, I asked Dave to look for me and he did and sent it to me to replace the 2" convoluted topper my bed came with that was too soft for me. I would have loved the soft topper if it was thinner. You can always call Dave at FloBeds since he is amazing at finding things for customers. He aims to please. I am amazed he found me a 1.5" topper recently but it is a shame when he asked me what ILD I wanted, I did not realize I wanted very soft so he sent me a medium soft. He even sliced a pillow for me to make it more low profile. |
|
mccldwll wrote: "At firmer ILDs this resilency can exert so much pressure against the body that although it doesn't register as pressure points like you would get on an innerspring mattress, it can make you sore all over. " While this may be a good shortcut way to describe the effect of firm talalay, it's not really accurate. Gravity is constant. Period. Your weight is a force (F=MA). ANY surface you contact exerts a force equal and opposite to your weight.
|
|
"After sleeping on a firm Talalay mattress (32/38/44 ILD) for four days not only was I sore all over, I woke up feeling like someone had been sitting on my ribcage all night." It's the 32/38/44 build. 32 is not very conforming. And as I said, I don't disagree with the subjective description, but was only theorizing why it feels like that, and how it might be endrun. We now seem to have a near consensus on this forum that a properly reconstructed coil mattress can be a great sleep experience. It's how the coil system is "finished" which makes the difference. My point is that the same is true of a talalay mattress. The original post referred to latex mattresses. There have been many posts about dunlop v. talalay. I've seen Serta talalay mattresses advertised recently with 28 core w/ 32 racetrack (and through the subtleties of advertising, I'm sure core also means there are PU comfort layers over that). My point was that how a latex mattress feels depends entirely on how constructed (and for me, and some others with back/shoulder issues, standard layering talalay or uniform dunlop just won't work. BUT, zoning will, whether as a complete dunlop, talalay, or topper over coil). |