What are the pros & cons of sleeping on a latex mattress? What does a latex mattress feel like?
|
I would like to know what some of the pros & cons are of sleeping on a latex mattress, especially in the kit form from a company like Flobeds (I have samples of the different latex cores from Flobeds). I understand that issues with comfort of latex depend on ILDs, a person's body type & weight, personal preferences, etc. The only type of mattress I've slept has been an innerspring (with no latex). It's hard to tell by laying on a latex mattress in a store what the mattress will feel like to actually sleep on. What is the difference in feel between sleeping on an all latex mattress and on an innerspring mattress? Does a latex mattress provide enough support for the lower back and hips, or is a latex mattress not a good choice for providing good back support? Does a latex mattress provide a good seating surface if you want to sit up in bed to read, or does your butt sink down too much for it to be comfortable enough to sit up in bed? With kits such as Flobeds that don't have a firmer edge support around the mattress to support sitting on, do you just sink in when you sit on the side of the bed? Can a latex mattress feel like you are sleeping on a piece of "dead" foam, "dead" meaning no cushiness, no springiness to the foam? Thank you very much for help and opinions. I've been reading this site (and old one) for over a year now, and I'm still learning. |
Re: What are the pros & cons of sleeping on a latex mattress? What does a latex mattress feel like?
|
mccldwll wrote: "After sleeping on a firm Talalay mattress (32/38/44 ILD) for four days not only was I sore all over, I woke up feeling like someone had been sitting on my ribcage all night." It's the 32/38/44 build. 32 is not very conforming. And as I said, I don't disagree with the subjective description, but was only theorizing why it feels like that, and how it might be endrun. We now seem to have a near consensus on this forum that a properly reconstructed coil mattress can be a great sleep experience. It's how the coil system is "finished" which makes the difference. My point is that the same is true of a talalay mattress. The original post referred to latex mattresses. There have been many posts about dunlop v. talalay. I've seen Serta talalay mattresses advertised recently with 28 core w/ 32 racetrack (and through the subtleties of advertising, I'm sure core also means there are PU comfort layers over that). My point was that how a latex mattress feels depends entirely on how constructed (and for me, and some others with back/shoulder issues, standard layering talalay or uniform dunlop just won't work. BUT, zoning will, whether as a complete dunlop, talalay, or topper over coil).
If you can sleep on anything configuring a Talalay mattress is easy. For the rest of us it's just way too much work and sometimes way too much pain. Mccldwll, even you have been trying to construct the perfect Talalay mattress for about a year now. And poor Lynn spent so much time getting hers just right and now that she's had a car accident she has to start tweaking it all over again. Like BeddyBye I don't think I can sleep on an all foam mattress any longer. My back just feels happier with a rigid innerspring support beneath it. I do like latex and memory foam, but I'm most comfortable with these materials layered in small, comfortable increments over the innerspring. Sometimes what we want and what we really need are not in a agreement. I really didn't want an innerspring mattress, but that's just what works the best for me. P.S. BeddyBye, Dunlopillo is a European latex manufacturerer. Europe's equivilent of L.I. But you're right, it is confusing! |
Re: What are the pros & cons of sleeping on a latex mattress? What does a latex mattress feel like?
|
BeddyBye wrote: I honestly don't think I could just sleep on latex alone. Or any type of foam. When I laid on the all-latex mattress at my mattress shop, it just felt like it had no give. Or maybe it just needed a wee bit more bounce. That's the one with the thick core and laminated comfort layers. I'm thinking the core is Dunlop process. I just prefer the feel of a good coil system as my primary base. From there I prefer it to be firm, medium firm and "luxury firm" or a firmer plush. Not so hard that my hips feel pressure points. Just plush enough so I feel some "cush", but not so much that my back sinks in. Of course, isn't that what everyone is looking for? Not always easy finding that combination, though! I'm hoping that the firmer Talalay latex and one thin layer of HR PU foam will be the magic long term match for me. I'm curious about what Cloud9 said, though, re; Talalay pushing back. I'm still going to attempt to see what a 2" layer of Dunlop would feel like, though. Maybe take off the PU foam and put the Dunlop in its place and one inch of Talalay over that. The trouble with coils is I can only have about 3 inches MAX of foam or latex layers. So, I don't have much to play with. I still wouldn't trade my coils, though. I'm kind of guessing that the Dunlop mattress I slept on was about 28 ILD. It definintely didn't thud! Although it was on a boxspring, and that will change the feeling. I'm not really sure why you would want to swap out the firm HR foam for the Dunlop. Firm HR foam has much more of a thud factor than latex. I think it provides a nice stablizing base over the springs for the bouncier materials on top. Remember, Dunlop is still rubber. It's bouncy. Just not jiggly. I'd be concerned that 2" of firm Dunlop would compromise the ridigity of the innerspring unit and you might be back to having too much foam on the mattress. I guess if you can return or exchange it for another ILD it would be okay. It might take a some experiementation. |
Re: What are the pros & cons of sleeping on a latex mattress? What does a latex mattress feel like?
|
" Mccldwll, even you have been trying to construct the perfect Talalay mattress for about a year now." Yes and no. Started a year ago but took 10 months off. Revisited recently due to neck/shoulder and back issues. Bought 3 Brylanes and the 36 ILD twin topper. I have nothing against dunlop (and even have a 35 yr. old twin mattress in cabin--originally modified for s sleep system in '70 FJ40 Land Cruiser, and subsequently used for toddlers bed) but ILD is so inconsistent, even throughout a single slab. Sellers really can't list an ILD with dunlop, and have to say "it's medium" or "it feels like 28 ILD latex." I don't think my experience would be any different with dunlop since it involves relative weight/displacement of hips vs. shoulders. So I need to zone. And since I haven't been able to find material locally, need to order. And that's where another dunlop problem arises for me. Shipping. It's heavy. Repacking a 3" twin size piece of talalay is rough enough. Try it with a relatively dense piece of dunlop which has been vacuum packed by the manufacturer. Some of these sites peddling dunlop with seemingly generous return policies obfuscate the fact that you have to repack it in original shipping materials, and return shipping costs are high (even where it seems to say that there is a minimal "return shipping fee", which often is a "handling fee"). One site stated if you lost the original boxes, they would sell you replacement boxes for $59. BOTTOM LINE: Enter all transactions fully informed. Whatever you buy, make sure everything is in writing. Read and reread the fine print and make sure you fully understand the terms and conditions. Ask your questions and get the responses IN WRITING. |
Re: What are the pros & cons of sleeping on a latex mattress? What does a latex mattress feel like?
|
I agree with all of the above. You are taking a chance with latex - Dunlop in particular - because it is so heavy to ship it back and forth. We were determined not to have to return layers so we tried very hard to get it right the first time. I wouldn't recommend ordering Dunlop unless you are very sure you know what you want and/or aren't extremely fussy and/or have special needs - unless you are willing to pay for shipping. I also think it takes some time to adjust to a new bed. I'm not terribly fussy and I don't have back problems but my husband does - it took him at least a night or two to adjust every time we reconfigured our Savvy Rest bed. Even his pillow position felt different with different mattress firmnesses. But we knew that we wanted to err in the direction of going too firm because we could soften it with toppers if we needed to. It is harder to correct if things are too soft. We knew that we could reconfigure the three firmnesses split into six pieces of latex until we got it right. We knew we didn't like the feel of spring coils or Talalay and what we read about Talalay. We knew that Dunlop sounded like what we were looking for. But it took a bit of a leap of faith and a willingness to work at it if we weren't completely happy. In a way, we got lucky that we happened to choose the right thing for us - but we had made a very informed "guess" based on lots of reading, talking to some of the mattress suppliers and thinking about our preferences and past experiences. We didn't just order the first bed we found. It took my mother almost 6 weeks to completely adjust to her new adjustable memory foam bed. Now she says she couldn't live without it. She has had back problems for years that are finally getting better. It took a while to get the bed recommended by her chiropractor to work for her but it did eventually. She also had to train herself not to flop over on her stomach - which was probably a big part of the problem. |
Re: What are the pros & cons of sleeping on a latex mattress? What does a latex mattress feel like?
|
cloud9 wrote: I'm kind of guessing that the Dunlop mattress I slept on was about 28 ILD. It definintely didn't thud! Although it was on a boxspring, and that will change the feeling. I'm not really sure why you would want to swap out the firm HR foam for the Dunlop. Firm HR foam has much more of a thud factor than latex. I think it provides a nice stablizing base over the springs for the bouncier materials on top. Remember, Dunlop is still rubber. It's bouncy. Just not jiggly. I'd be concerned that 2" of firm Dunlop would compromise the ridigity of the innerspring unit and you might be back to having too much foam on the mattress. I guess if you can return or exchange it for another ILD it would be okay. It might take a some experiementation. The local Verlo mattress guy told me that they don't recommend putting latex or memory foam on springs or a box spring. They sell rigid foundations specifically for foam mattresses. I didn't get into the reasons why - but I have my doubts about mixing and matching springs and latex. Just my 2 cents though. Dunlop is springy but it is a different springy than springs or Talalay. |
Re: What are the pros & cons of sleeping on a latex mattress? What does a latex mattress feel like?
|
He probably doesn't recommend it because it will last too long. Plus, he's a salesman and doesn't know what he's talking about. On epinions. Old, but..... Attached is a copy of a letter sent directly to the owner of Verlo, Dale Williams. He never answered or replied to the letter: Dale Williams VyMac Corporation W3130 State Road 59 Whitewater, WI 53190 Dear Mr. Williams, I am writing to express my dissatisfaction and discomfort with my Verlo Mattress. I purchased a Verlo Mattress approximately two years ago from the Round Lake Verlo Store in Round Lake, Illinois. During the two years I have owned my Verlo Mattress, I have expressed my concerns and complaints at the local store, regional franchise and the National customer service. Each complaint has been received, however, there has yet to be any improvement in my Verlo Mattress, nor has there been any follow-up to my complaints. I purchased the Verlo Mattress on a recommendation of my family. At the time of purchase, the sales agent recognized my family’s name and granted me a “free” bed frame, two pillows and a mattress pad. Later, when I phoned the local office to express my concerns about the discomfort of my Verlo Mattress, I was told in great detail that the salesman was wrong in allowing me all three items. Additionally, the local office told me my billing information did not indicate I was awarded all three items, namely the bed frame. I believe this information is important to express because the local office was distressed over this incident occurring and I spent a great deal of time explaining my Verlo Mattress rested upon a Verlo bed frame. The specific complaints about my Verlo Mattress are 1) the Mattress curves to the center and 2) the bed and the mattress is uncomfortable. I wake each morning feeling uncomfortable and stiff. I believe it is impossible for me to “wake on the wrong side of the bed”, because all sides of the bed are the “wrong side”. Awakening daily is accompanied with feelings of frustration from a constant discomfort of my Verlo Mattress. These specific complaints have been expressed several times to the local, regional and National Verlo representatives. During the first year, I complained about the discomfort approximately four times locally and regionally and my Verlo Mattress was returned to the warehouse two (possibly three) times to be corrected. During the second year, I complained to the National Customer Service and my Verlo Mattress was again returned to the warehouse, where I was told my fee for correcting the problem was waived. However, each time my Verlo Mattress has been “corrected”, the discomfort does not improve, nor is there any significant change in the mattress. In an effort to correct the problem myself, I have done the following things to try to improve the discomfort: 1) I flip my Verlo Mattress bi-montly 2) I have switched the Verlo box-spring with another box spring. 3) I had the Verlo technicians check to see if the bed frame was set up correctly (it was). 4) I have slept in different parts of the bed. 5) I have had other people sleep in the bed to check the level of discomfort (they have agreed my Verlo Mattress does not offer a restful sleep) 6) I have slept in several other beds and have found sleeping to be comfortable and restful. After all my research and evidence, I have found my Verlo Mattress is the sole reason for my restless nights and uncomfortable sleep. In my recent (National) complaint, I have requested a replacement. Additionally, I have indicated that I do mind a store model or discontinued model. However, I was told that was not possible. Currently, I do not have the funds to purchase another mattress. Therefore, I feel imprisoned on my Verlo Mattress until the time when I have saved the money to free me from my daily discomfort. Before I move to my final stage of complaint (which would be Consumer Advocacy, Better Business and Internet sites which allow Mattress reviews), I would be interested in hearing your thoughts concerning my dissatisfaction. If you are unable to respond or chose not to, please do not ask the Local, Regional or National Customer Service to speak for you. As I mentioned, I have spoken with those people and believe they have done what they believe they could do for me. Recommended: No Comments on this Review |
Re: What are the pros & cons of sleeping on a latex mattress? What does a latex mattress feel like?
|
BeddyBye wrote: ... Not so hard that my hips feel pressure points. Just plush enough so I feel some "cush", but not so much that my back sinks in. Of course, isn't that what everyone is looking for? Yes, perfect way to describe it. That's EXACTLY what I'm looking for: just enough cushion for the hip bones but no more. |
Re: What are the pros & cons of sleeping on a latex mattress? What does a latex mattress feel like?
|
Interesting Verlo comment. I hadn't seen it before. I'm glad we didn't get a mattress there. The people were nicer than the other places but we weren't that impressed. Sometimes I think we could have just gotten a mattress locally and not fooled around with the internet retail world - and then I remember what I didn't like about the local mattress choices.... |
Re: What are the pros & cons of sleeping on a latex mattress? What does a latex mattress feel like?
|
Good point, cloud9. Right now my mattress has been feeling pretty nice the last few nights. I'm going to leave it alone for awhile. I did order the Brylane latex topper last night, thanks to this forum! :) cloud9 wrote: I'm kind of guessing that the Dunlop mattress I slept on was about 28 ILD. It definintely didn't thud! Although it was on a boxspring, and that will change the feeling. I'm not really sure why you would want to swap out the firm HR foam for the Dunlop. Firm HR foam has much more of a thud factor than latex. I think it provides a nice stablizing base over the springs for the bouncier materials on top. Remember, Dunlop is still rubber. It's bouncy. Just not jiggly. I'd be concerned that 2" of firm Dunlop would compromise the ridigity of the innerspring unit and you might be back to having too much foam on the mattress. I guess if you can return or exchange it for another ILD it would be okay. It might take a some experiementation. |
Re: What are the pros & cons of sleeping on a latex mattress? What does a latex mattress feel like?
|
And, I find it the best of both worlds. :) mattressmom wrote: The local Verlo mattress guy told me that they don't recommend putting latex or memory foam on springs or a box spring. They sell rigid foundations specifically for foam mattresses. I didn't get into the reasons why - but I have my doubts about mixing and matching springs and latex. Just my 2 cents though.<BR><BR>Dunlop is springy but it is a different springy than springs or Talalay. |