|
Guess what? Englander is no better than the S brands (imho)... As you may know, I bought the Englander (Malibu Firm) only for the springs. I PLANNED to give it a "foam-ectomy", getting rid of the junky cheap foam. But I wanted to see how long it might be comfortable before I did surgery on it. Well, after about 4 nights I determined that it was not good at all for my back. So I did surgery on it tonight.  I'm going to adda link to or post pictures of the surgery in the near future, right here in this thread. I did expect more from Englander... I opened it up and was shocked to see that they had NO - ZERO - ZILCH!!! - good firm foam inside!  What it had was 3 layers of 7/16" very soft, white pu foam on top of the springs. That's ALL! NO firm foam, no support, NO WONDER it was hurting my back, and no wonder if you look around the web you can find dozens of posts about how people's Englander mattresses started hurting their back within a week to a month... just like the "S" brands... On top of the 1 and 5/16 inches of soft junky pu foam, there was the whatchacallit, the top sewn into tufts, whatever they call that thing. (What kind of a mattress expert am I??! I can never remember the name of that top piece!  ) I removed that too because it's just the same cheap junky foam sewn together with a cloth and tufted...(By the way, if you buy the Malibu PLUSH instead of the Malibu FIRM, know what you get? Instead of 1 and 5/16" of junky pu foam, you get about 5" of junky pu foam! That must REALLY hurt people's backs!) This kind of mattress construction - which all the major companies are using, now, STINKS! PU foam = Peee Eww!  So, I took off ALL the foam, and then replaced it with this, from bottom up: 1" of zoned HR foam: top = medium, middle = firm, and bottom = very firm (feet area doesn't really matter, imho) 3/4" of medium-soft latex (Talalay - not certain of the ILD - maybe 24 or 28?) 1" of Venus foam So it's about the same amount of foam as it had - now 2 and 3/4 instead of just 2" - but the main difference is that now I have QUALITY foam on top of the springs, foam that gives SUPPORT as well as softness. Will post more as the experiment progresses... I'll be playing around with this combination, see how it feels. My wife has something very similar to this on top of her Sealy springs, and she likes it pretty well.- P.S. the springs seem to feel pretty good. I can't say for sure though until I've slept on them with good foam for a while This message was modified Sep 5, 2009 by jimsocal
|
|
Alexander wrote: Pretend you're Sealy. You're in the midst of a recession (depression?) your sales are plummeting and you have to cut somewhere. Cutting the quality of the beds is cutting your hand off so you try to avoid that.
Alexander, there are a lot of knowledgeable people on this Forum, but I smell an industry apologist. You keep dodging the question every time someone asks. If you have an industry affiliation you need to disclose it now. |
|
Cloud and Eagle, No, I do not currently work for the mattress industry. I'm recently retired after thirty-five years of running my own shop. After doing it for so long I can't help but still follow the industry and still have the vendor contacts I made over that time. Retirement is considerably more boring than I'd anticipated. Cloud, I can only talk from my personal experience and sales over thirty-five years. It's true some people are dissatisfied with their mattress. Picking one is difficult. Often people do it incorrectly and this is a large contribution to their dissatisfaction. The vast majority of consumers, however, enjoy their sleep product for the amount of time they're supposed to. In a good quality spring mattress this is between 8-10 years. 6-8 is you and your partner are considered very heavy. It's all about buying the right mattress for who you are and what you need. For example, a couple of young side sleepers with a combined weight under 300lbs who enjoy a soft, featherbed feel that envelops you would probably enjoy a good World Class Simmons pillowtop. By contrast a hefty stomach sleeper who sleeps exceptionally hot would not only rip through the bed in a short amount of time but would be miserable in the process. Buying a mattress is more like buying a pair of shoes than, say, a television. Just because the shoes don't fit you means the shoes are inferior or junk. There's somene out there they fit. The trick is finding out what DOES fit you. I'm under the impression that's what this site is for. -Alex |
|
Welcome to retirement land Alex. Believe me, you will get use to it. It isn't so bad after you reach your 70+ years. it even becomes rather nice. Your response to cloud9 and myself was courteous and friendly, even informative. However you must realize that we folks here, on this forum, are in many cases the victims of greed from the manufacturing sector, and ignorance from "under trained sales people", and many other negative human emotions from those who care a lot more about making money than they do about taking care of there customers. You sound like one of those small business people who did care about their customers, and I am going to assume, took good care of them. You then would be, the kind of individual that the poor misguided folks on this website have been looking for. And your presence here, if that is the case, is most welcome indeed. But, board members like Jimsocial, who are willing to cut their mattress to pieces (and take pictures) in order to find out what they purchased and do their best to repair same, are a godsend because we get to actually see what is inside these mattresses. If you have pictures of the better quality mattresses showing their innards and can explain them to us, I believe there are many on this board who would be most thankful. If on the other hand, said pictures were to show rather expensive mattresses with not very expensive synthetic foam, and some of your vendor friends were to read this website (doubtful) you might lose some vendor friends. In any event, thank you for your informed replies. They are most welcome. . |
|
Alexander wrote: Cloud and Eagle, No, I do not currently work for the mattress industry. I'm recently retired after thirty-five years of running my own shop. After doing it for so long I can't help but still follow the industry and still have the vendor contacts I made over that time. Retirement is considerably more boring than I'd anticipated. Cloud, I can only talk from my personal experience and sales over thirty-five years. It's true some people are dissatisfied with their mattress. Picking one is difficult. Often people do it incorrectly and this is a large contribution to their dissatisfaction. The vast majority of consumers, however, enjoy their sleep product for the amount of time they're supposed to. In a good quality spring mattress this is between 8-10 years. 6-8 is you and your partner are considered very heavy. It's all about buying the right mattress for who you are and what you need. For example, a couple of young side sleepers with a combined weight under 300lbs who enjoy a soft, featherbed feel that envelops you would probably enjoy a good World Class Simmons pillowtop. By contrast a hefty stomach sleeper who sleeps exceptionally hot would not only rip through the bed in a short amount of time but would be miserable in the process. Buying a mattress is more like buying a pair of shoes than, say, a television. Just because the shoes don't fit you means the shoes are inferior or junk. There's somene out there they fit. The trick is finding out what DOES fit you. I'm under the impression that's what this site is for. -Alex Alex, as a fellow forum member, welcome to the board, and thank you for disclosing your industry background. We have had industry people here on the board before and as long as they aren't hawking their own products all the time it is nice to have someone here who is knowledgeable about mattresses. You've already taught us a lot about Sealy and Stearns and Foster and SImmons and for that I praise you. I hope all of us will treat each other with respect even when we disagree and we are bound to disagree. Many of us here have been screwed in one way or another by the mattress industry or at least found it lacking in one way or another. So no doubt there will be those who will disagree with your more pro-mattress industry point of view. But I for one welcome you and applaud you for your willingness to "walk into the lion's den" so to speak! That said, maybe you can learn something from us too, and maybe you can pass on our opinions as consumers to some of your industry friends. I think there are some of us here who are pretty knowledgeable about what makes a good mattress and what doesn't, what works and what doesn't. I think that perhaps you have a much different perspective on the subject of mattresses, NOT ONLY because you sold them, but because you sold them WELL. In other words, you know what works for different people, you yourself say you have no problem with disclosing what is inside the mattress - and you either KNOW or would find out for the customer. But, you see, many of your fellow mattress sales people are completely the opposite of how it appears you were as a mattress salesman. I would say the vast majority of mattress salesmen I have encountered in the past 8 years or so have been: a) uninformed b) poor salesmen/women c) no interest in learning So when someone walks into a store and cannot get answers about what it is really made of, cannot compare one mattress to another (because the one at the store across town has the same mattress but it has a different name), or encounters idiot or uncaring sales persons, then, well, it tends to turn us off the mattress industry and off of mattress salespeople. When the web sites and ads and website info at stores on the web all give NO info about the kinds of foams used or the gauge or number of the springs, it DOES tend to seem that there is a lot of obfuscation going on in the industry. Combine that with the above issue of mattresses with different names, and with being stonewalled and sent on wild goose chases about what is inside the mattress by the Corporate Customer Relations 800# answerers... well, it all tends to give one a very negative opinion of the mattress industry. Then, when someone you know or you, yourself, spend, say $1000 for a mattress and have it hurt their/your back within a week, okay, you see what I am saying, right? You can see why "mattress salesperson" has a bad connotation, much like "used car salesman". And I do not mean to insult you by saying that, only to tell it like it is. Your description of your bed, and what is inside it made me want to try it! Your description of what is inside the S&F's and Sealys made me realize that the higher end models have at least some advantages over the lower end ones. I am still skeptical about some of the non-latex foams that are in those, but hey, at least it sounds like they're trying to make good spring systems! I wish I had run into someone like you when I was looking at mattresses when I first bought my Sealys back in 2004 or so. I'd have spent a little more and bought something better had I known. I understand what you are saying about how "most" customers do not want to hear about what is inside their mattress. I am sure that is true. They just want to know that it's made with quality and that it will provide them with comfortable sleep. But still, the salesman SHOULD be ready to field questions about what is inside and the companies should be ready to provide that info - in fact the salesmen should not have to ask for it, it should be in their desk or in a file they can readily access. Back to your computer analogy: Can you imagine walking into CompUSA and asking, "What kind of RAM does it have and who makes the sound card?" and being told, "No, I can't tell you that!" Or, "Gee, I don't know... Maybe I can call the 800# and find out. But the guy who would know is on vacation and won't be back til next week..." Well, that is exactly what I encountered when I went to buy my Englander and that is not one saleperson but 4, at 3 different stores, oh, and 2 phone calls to web stores and 2 calls to Englander manufacturers and the England corporate web site. I would be willing to bet that I'd have had about the same experience with Sealy, Spring Air, Serta, and Simmons. So, there are many areas in which I think many of us have legitimate complaints about the mattress industry and mattress sales people. That said, I can tell that you know how to direct a person to the right bed for them and are very knowledgeable so I am not indicting you, personally, here. Anyway, I hope all will welcome your input here and I hope we can all be civil in our debates or disagreements. |
|
Jim I agree with your post completely. Alex however does seem like the kind of knowledgeable and involved salesperson we would all like to run into when we went to one of the major manufacturers stores. Unfortunately, as you have indicated, far too often this is not the case. My assumption is that Alex either had a mattress store of his own, and quite possibly several of them, and therefore had an entirely different perspective on the industry than the kind of salespeople we run into. Our type of sales person are there to make a living by a commission. He did say that he had 35 years experience. Most of the salespeople we run into are lucky to have 35 months experience, and that, as I have already mentioned, simply coming to work and trying to make sales so they can make enough commission to pay their bills. A very different perspective indeed. |
|
eagle2 wrote: Jim I agree with your post completely. Alex however does seem like the kind of knowledgeable and involved salesperson we would all like to run into when we went to one of the major manufacturers stores. Unfortunately, as you have indicated, far too often this is not the case. My assumption is that Alex either had a mattress store of his own, and quite possibly several of them, and therefore had an entirely different perspective on the industry than the kind of salespeople we run into. Our type of sales person are there to make a living by a commission. He did say that he had 35 years experience. Most of the salespeople we run into are lucky to have 35 months experience, and that, as I have already mentioned, simply coming to work and trying to make sales so they can make enough commission to pay their bills. A very different perspective indeed. Eagle2, go back and read Alexander's post: he clearly stated he ran his own retail store for 35 years. One of the salespeople I ran into was apparently paid by the hour, not on commission because he was not interested in answering any questions, was on the phone when my wife and I walked in - obviously a social call - and went right back to it when we walked out 1 min. later after he blew us off. Another guy was nice enough but knew next to nothing about the Englander beds I was asking about. Then another guy who said Englander was his "specialty" also knew very little and could only tell me that he'd call his contact at Englander to try and find out. Imagine! And Englander was their "specialty"! 6 or 7 years ago when I was shopping for mattresses, before and right after I discovered this forum, I talked to sales people at small stores and big stores, about Sealys, Simmons, Spring Air, Englander, latex, etc etc. and out of all those stores I went to, I only found one guy who seemed like an "Alexander-type" sales guy, who knew anything about what was inside the beds or what was best for a certain body type or anything like that. The one thing I found - after I learned enough to start asking questions about types of coils, gauges, turns, foam layers, latex, etc. - was that almost none of them knew anything and that they mostly could not or would not GET the information I was asking for! The one thing I can't stand is when a salesman says "Just lay on them and pick the one that feels best!" I would be interested in Alexander's opinion on this, but to me, this is the worst thing a salesman can say! I think ONLY a really sensitive individual who has truly slept on many different mattresses or was really well informed and sensitive to their own body, could tell by laying on a mattress for less than an hour, how that mattress is going to feel after sleeping on it for several nights or a week or a month! Having back problems for many years, and having tried many different types of beds, I can never tell anything by laying on the bed in a store! I wonder if Alex* has encountered this - perhaps it is only because of my back problems - but I can fall asleep on almost anything and it feels good, but it's not until after sleeping for 4-6 hours that I know if it gave me proper support because at that point my back starts to hurt. With pure foam and no springs, sometimes the mattress can feel good to me for a few days or a week, only to THEN start hurting my back. I have always chalked this up to the foam breaking in but whatever it is, for me it is a real phenomenon and problem. So I hate it when the mattress salesman says "It's easy - just lay on them and pick the one that feels the best!" If that were the case I think everyone would walk out buying the pillow-top with the most cheap foam on top because that DOES feel the best when you only lay on it for 15 minutes in the store! In fact, I think that is exactly what the mattress companies are trying to do, at least in their lower priced mattresses. I apologize for all my too-long posts. I start writing and then keep going like the Eveready Bunny. *Alexander, is it okay if I call you Alex or do you prefer Alexander? This message was modified Sep 7, 2009 by jimsocal
|
|
Alex is fine, Jim. Thanks for your welcome and vote of confidence. I'll do my best to shed some light on the workings of major brand names as therein lies the bulk of my experience. Perhaps I'm too quick to defend people who work in my former field but I tend to see people named Ben with daughters named Jenny who are starting college in the fall. Blue collered Joes just trying to make a living. I absolutely believe the consumer should have as much information as is practical to give them if they want it but I don't think Mattress Salespeople are unique in their lack of fine detail or where to find it. To take your CompUSA example I challenge you to go to your local BestBuy (To my knowledge there are no more CompUSAs) and ask the RSA there what the default RAM timings are on the entry level emachine. From an industry standpoint this isn't too much more complicated than asking the ILD of the "A" layer of a Sealy bed you're trying to purchase. I'd bet a dollar to a penny that only 1 out of 10 of BestBuy's best could tell you what RAM timings even are and maybe 1 out of 15 tell you the true figures for any given model. If you try to call emachine's support system and manage to get a person on the other line they are even less likely to know. Part of the reason is no one ever asks. In 35 years I had exactly 3 people ask what the ILD of a specific foam was. All three were former vendors. Perhaps I'm being too defensive but some of these guys are my friends, and former coworkers. Heck, a few of them are due over for laborday beer tonight. -Alex This message was modified Sep 7, 2009 by Alexander
|
|
Alex, I do see your point, but I don't think it is QUITE the same. Computers are much more complex than mattresses. I think knowing what ILD the foams in the mattress are, is more like knowing what type of RAM it is or what type of audio board is in it, and those things they print right on the little paper next to the price at BestBuy, usually. My theory is that the reason mattress store customers do not ask what kinds of foam etc is in it is because the mattress industry has purposely tried to keep us from knowing. Part of their whole way of doing things seems designed to keep us from knowing and from comparing mattresses from one store to another. Is there a good reason, for example, why a mattress at one store made by Sealy is virtually the same as the one at a store across town, but has a different name? In my opinion there should be legislation against this. What if cars were sold this way? Where every dealer had a car wtih a different name? At one Toyota dealer it would be the Corolla and at another the exact same car or maybe all the same except for one minor difference, would be called the Cardoba? IF Sealy P, Spring Air, S&F etc. started naming their mattresses the same thing for the same model across the board, and if they printed a card out and posted it next to the mattress that stated what it was made of, what types of springs and foams and ILD's were in it, wouldn't at least the smarter consumers soon learn to tell the difference in quality, and learn the differences in prices? In other words, "Well, I see here that THIS one is $200 more but it has a layer of latex instead of a layer of PU foam... So what is this latex stuff? Why is it better?" Then the salesperson - who of course WOULD have to learn these things instead of just saying "Go lay on the beds and choose the one that feels best!", would say, "Yes, latex is a much higher quality foam that is rated to last 20 years, whereas the pu foam in the other model will break down within a year or two". I think IF the mattress industry stopped trying to obfuscate the innards of their mattresses and allowed comparison shopping by calling the mattresses by the same names, then consumers WOULD start asking questions, and that is exactly what the mattress co's do not want, because then they'd stop buying junk, or would only buy junk if they absolutely could not afford a higher quality. My whole theory is that people WOULD pay $1500 $2000 for a mattress IF they thought it was WORTH it and if they were assured that the materials inside warranted that kind of money. I am still skeptical as to whether many of the $2000 mattresses Do have insides that make them worth that much money... I would love to see a day when you'd walk into the mattress store and right next to the name of the model of the mattress- which would be the same name as the same mattress across town! - it would show the ingredients from the ground up: 12.5 gauge Bonnell springs with 5 turns, double tempered steel dacron layer over springs 1/2" HR foam, ILD 45 1.5" Talalay Latex, ILD 32 1" 5lb. density memory foam Quilted linen cover tufted to 1/2" soft polyurethane foam By the way, what IS the name of that top cover piece? is it the "quilted top", or what? I hate that thing! Why do they have to make it that way, just to keep it tight so it doesn't look loose on top of the mattress or is it just a custom? To me, it's uncomfortable. I like my mattress top to be as smooth as a piece of foam, or at least - as in the cuddlebed topper I use in the photos above, to feel soft, not feel the tufts. |
|
Jim, You bring up an interesting point regarding Mattress sales with your "Just lay on them all!" point. Some RSAs do this. It's born from a lack of self assurance and sometimes expertise. Here's the thinking behind it in example form. Sealy Posturepedic 5-turn Firms are HARD beds. Like bounce a quarter hard. This is due to their reasonably thick 14ga wire being connected by 14ga lace. In short, whenever you press down on one coil, you're pressing down on the 8 coils surrounding it. Couple this with the fact that Sealy zones the middle of their beds with a comparitively firm memory foam and you have a bed you could crack your hip on if you lay down too quickly. Let's pretend you're an RSA. You have a consumer come in and say, "Hard bed! I want the firmest piece you have! Show me your flooring department!" you might take them to this Sealy Posturepedic Firm. The consumer then lies down and bounces right back up saying, "Too soft! I feel like I sink right in!" As the RSA you might think to yourself that this guy wants to sleep on concrete. While you're attempting to come up with a response the consumer sits down on the Simmons Beautyrest right next to it. Now the Simmons firms are considerably softer. Even though they use a thicker gauge steel (13 on the firms) the fact that each coil is individual gives you a more conforming, less hard-floor type of feeling. You're not feeling the pressure of the 8 surrounding coils whenever you press down on 1 like the Sealy. Imagine this consumer sits down on the Simmons and immediately lies back saying, "Wow...now this is nice and firm." Your professional sense and the laws of physics tell you that the consumer is out of their mind. You do not however argue with him. You can't say, "Well Mr. Consumer you're actually incorrect." People tend not to like their salesguy arguing with them. Now imagine you have this happen a lot. Let's say 30% of the time the customer disagrees about the feel of the bed with what you know to be true from personal experimentation and simple logic. Imagine you're relatively new. You might eventually throw logic out the window and decline into a "Just try everything!" attitude. From both the consumer and the RSA's benefits this attitude is wrong...but understandable. A good RSA will ask you a series of questions and narrow your selection down to a few for you to try. Less than five. He might ask these questions outright or he might take the "Eye-doctor" approach of "Which is better? This one or this one?" until he identifies what you're responding to and directs you to those beds. The "Try everything!" approach tends not to work because the beds will all feel the same after about 5. This is useless and counterproductive for both the RSA and the Consumer. The RSA then has a hard time justifying more expensive beds because they all feel the same to the consumer at that point. The consumer runs a high risk of getting the wrong bed because he's been desensitized. In truth, unless the consumer has extensively tried a specific bed and specifically comes in looking for it, the best thing the RSA can do for the consumer is ignore what the consumer THINKS they want. With the exception of a very small minority that has ventured into gritty details, they have no clue. A good RSA will smile, listen to what the consumer thinks they want and then identify what they actually need. A very good RSA will do so without the consumer realizing it. Heh. -Alex |
|
Jim, Most major retailers will have cards that have at least some of the information you're looking for. Some small shops don't. I have an old one from my shop lying here it says the following: - 782 Sealy Posturetech coils - 7 zone No Toss and Turn inlay with Visco - Latex - Visco pressure relief - Unicased XT edge support - Silk and wool infused top These cards are attached to the headboards of my former shop and are different for each bed. That's about all the detail they go into and are generally more than enough for most consumers. Most of your larger stores and some of your smaller stores should provide at least this much. So far as the names of the beds being different goes. Well, sometimes the beds are genuinely different by retailer. 5 turn vs 7turn coils, etc. For the most part, however, they're not. The manufacturers have given you a way around this though. Each bed belongs in a series. For example, a Sealy Posturepedic spring mattress belongs in one of 3 categories: -Premier -Reserve -Signature. While not all beds within the same series are identical they do share a lot more in common within a category than without. So if you're shopping at Mattressplace X and you find a Sealy Signature Great River Rapids or whatever and you go to the competitor who tries to convince you that the Sealy Reserve Arbor Morning is the same bed, you can be assured that he's full of it. If he instead shows you a Sealy Signature Giant Floating Dragon (all these names made up) you can at least know they share a lot in common. Simmons Beautyrest uses classifications: -Classic -Worldclass -Exceptionale -Black All Simmons spring mattresses will be called one of these regardless of where you shop. Knowing these categories helps you cross shop. -Alex
This message was modified Sep 7, 2009 by Alexander
|