MY FLOBED CAME!
|
Whew! The Flobed arrived this afternoon in 3 boxes! I got all the pieces out and checked them to be sure I got everything ordered. I couldn't put it together right away because I was waiting on a foundation to be delivered. They finally brought the foundation around 6:30, so I got to work! Originally I intended to take pictures of the process, but then my DH came home and announced he wasn't helping, so I huffed all the pieces upstairs, laid out the cover as instructed, and began taking out the individual layers. Aside from each piece being heavy and unwieldly, it really wasn't too difficult to get the layers on the mattress cover. and adjust them. I did have to stop and take a 10 minute break after getting the first 2 layers on the bed (4 pieces). Layer 3 went on . . .and then the topper! That's where I ran into a little snag. I put the soft covoluted top layer on, and it's waaaay too big! It's marked a queen, but I'm pretty sure it's a king, lol. I get it lined up top to bottom and along one edge, and it overhangs the other side by about a foot! So . . .temporarily, I folded that piece up and set it aside and zipped up the other 3 layers into the cover. First impressions are, this bed is amazingly comfortable! I was worried about getting a firm/xfirm/xfirm, and I'll have to sleep on it a few nights, but oh la la! It's comfortable just to lie on. Very supportive, springy and bouncy, but not hard. Tomorrow I'll have to call Dewey and have a chat about the top layer. What I'd like is permission to just cut that piece to size without losing my 90 money back guarantee. I've been waiting so long for a comfortable mattress, I don't want to mail this one back and wait for another convoluted piece. If he says ok, I'll trim it down, unzip the cover, put the convoluted layer on . . . and ahhhhhh. I'll do as Eagle and report back on my experiences with my Flobed, though maybe not in the same precise detail. I can't wait to go to bed! |
Re: MY FLOBED CAME!
|
KimberlyH wrote: I tried someone's suggestion and switched the layers around. Now my side is firm over firm over extra firm, hubby's side is 3 layers of extra firm. I'm finding this more comfortable than the two layers of extra firm. What is bothering me, is when Flobeds sent me a replacement convoluted topper for the king size they accidentally sent me, it's short, both in length and width. It's about an inch to an inch and a half short in both directions. I've worked and worked on it, and it just does not cover the cores, and the cores are snug against each other. Part of me says meh, it doesn't matter because I'm not sleeping on the edge, and part of me says, they sent the wrong thing the first time, the second time it should have been right! Also, when I got finished zipping up the cover after switching the cores around, I discovered the zipper was separating at the beginning point. So I'm not so sure about the quality of the zipper either . . . I suppose I'll call them to discuss these issues. Kimberly: I know what you mean about the zipper. It does not look all that substantial to me either. I questioned them about this and was assured that they have had no problem with it. They also told me that the cover has the same guarantee of 10 years that the latex does, IE not pro rated. In the five weeks that I have had my mattress I have had the top of the cover off four or five times now, without any difficulty. But I think it would be good if they put a more heavy duty zipper on the cover. It is particularly difficult to get on the first time, as the cover is slightly smaller than the dimensions for the bed so as to better hold the various pieces together. This requires some stretching and pulling on the cover to get it to fit. A better more heavy-duty zipper would be a plus, it seems to me. It is a particularly good stretch, when you have a king size mattress, across the top of the bed where it is close to the headboard. I'm 6' 2" and it is a good stretch for me. Being off balance like this causes some worry when you have concerns about the zipper. I am surprised to hear that they have sent you two convoluted top pieces of latex that were the wrong size. My piece for the Cal King bed is actually slightly larger so that I have to tuck in the corners. One thing to keep in mind is that this top piece is really two pieces glued together. The seam is so minimal that it is hard to see, but it is there. Evidently somebody has been putting the wrong pieces together. I'm sorry to hear about this, but I also feel sure that they will fix it for you at no cost for the topper or in shipping. I would not hesitate to call them about it. Report back and let us know how it goes. |
Re: MY FLOBED CAME!
|
My convoluted top layer is about an inch narrower than my queen bed, but I just kind of shake and pull it when I lay it on top. I think it's probably due to the glue seam--seems like it would be hard to glue that kind of foam and get it perfect. Although it'd be nice if it were perfect, the latex seems quite accommodating and I don't see it as a problem. I've had the top cover off more times than I could possibly count with no problem with the zipper (knock on wood!). I assume it's made out of a nylon material (but maybe plastic?); if so, that's usually very durable. Savvyrest uses a thick brass zipper, but their cover is not stretch fabric; the cotton is heavier and rougher and more like canvas. I must say, I absolutely LOVE the stretchy FloBed cover. I recently, unexpectedly, had the opportunity to see a Savvyrest bed, and did unzip/zip the cover. With the zipper being a bit larger and heavier, it's perhaps easier to get started, and I didn't seem to have to pull the fabric as much (I guess the cover couldn't fit quite as tight being a non-stretch woven fabric) but there was no inside flap as there is on the Flobed cover, so I kept getting the zipper stuck on the fabric on the way around. A little annoying but not a big deal, as it was easy enough to unstick, but I find the FloBed one much easier to do. |
Re: MY FLOBED CAME!
|
Linda: Thanks for the information on the Savvy Rest zipper. I think you're the first person who has posted that had experience with both the FlowBeds and the Savvy Rest zipper's. Dave Turner was quite positive about their zipper being durable. I am sorry to hear that Kimberly is having some difficulty with hers. But I'm confident that Dave or Dewey will take good care of her. This message was modified Oct 30, 2009 by eagle2
|
Re: MY FLOBED CAME!
| My zipper seperated as well. However, after I completely unzipped it and restarted it again, it seemed to be working fine. |
Re: MY FLOBED CAME!
| I like the knit Flobed cover too. I'm glad you mentioned what the Savvy Rest cover was constructed of, I would not have liked that at all. I'm buying a second mattress for my daughter, so now I know not to get the Savvy Rest. :) |
Re: MY FLOBED CAME!
|
Well, you my dear are headed for countless nights of indescribably delicious sleep!!! I have had my FloBed for more than a year and I STILL look forward to going to bed every nite! IMHO, all latex mattresses should be measured against FloBeds. BTW, thanks to the poster who mentioned Snugfleece. I have never heard of them but plan on ordering one as soon as I finish posting this message. If Shakespeare were alive, I think he would rewrite his famous line to..."Ah, to sleep on a FloBed, perchance to dream..." Gizmodo |
Re: MY FLOBED CAME!
|
Kimberly: I am curious what Dave Turner had to say regarding your zipper problem and you're too short top convoluted layer of latex? I was also wondering if you discussed with him about the Vzone bed? |
Re: MY FLOBED CAME!
|
I haven't called him yet. It's just a case of inertia - does it really matter that the topper is about an inch too short both ways? Is it worth the hassle of unpacking another new topper, getting the old one off the bed and putting the new one on and zipping the thing up again? Then packing the old topper and lugging it to a UPS store to be shipped back? But now I'm thinking of ordering a medium layer, and if I do, I'll discuss it with him at that point. |
Re: MY FLOBED CAME!
|
linda wrote: Savvyrest uses a thick brass zipper, but their cover is not stretch fabric; the cotton is heavier and rougher and more like canvas. I must say, I absolutely LOVE the stretchy FloBed cover. I recently, unexpectedly, had the opportunity to see a Savvyrest bed, and did unzip/zip the cover. With the zipper being a bit larger and heavier, it's perhaps easier to get started, and I didn't seem to have to pull the fabric as much (I guess the cover couldn't fit quite as tight being a non-stretch woven fabric) but there was no inside flap as there is on the Flobed cover, so I kept getting the zipper stuck on the fabric on the way around. A little annoying but not a big deal, as it was easy enough to unstick, but I find the FloBed one much easier to do. You are right, Linda - my organic cotton Savvy cover is not stretch fabric. It is a heavy cotton, but not stiff - it's actually quite soft (I can't recall the proper term, but Savvy's cover is "buffed" or "rubbed" to soften it) So, while it's not the gorgeous damask found on nicer innerspring mattresses (or FloBed), I think it might hold up better to numerous openings over the years. (but will we be opening our beds up that much once we get it right?) Our brass zipper zips along fast without pushing in of latex etc, and it hasn't gotten caught on anything (yet). Unfortunately for Savvy, some people are put off by their cover because it's so "plain", but I recommend either finding a store that has a bed to try, or get the free samples from Savvy. We did both and got the samples first. - including a sample of the cover & wool. When we saw the bed in the store, my initial reaction was "what a great-looking cover"! I wasn't expecting much in looks, but it's all quality, both in looks and feel. I do have to admit that Flobeds has an adorable cover! However, I would only see the sheep once in awhile as we use a nice mattress pad (doesn't everyone?) so the look & feel of the cover didn't place high for me. I guess the practical side of me said to go with durability - and I have to say I am very pleased. I'm very happy to read that all of us who made the difficult decision to go with an expensive latex bed, are having sweet dreams! |
Re: MY FLOBED CAME!
|
Catlover: I agree with Kimberly that the FlowBeds cover is quite nice. Their approach is different than Savvy Rest, but that certainly doesn't make it superior. The major thing you want in a cover is that it holds the latex correctly, that the cover is easy to take off and put on, and most important of all, it sleeps comfortably. All of this my FlowBeds cover accomplishes. But I must say that the pictures you took of your bed completed with the cover in place made a very attractive looking mattress. I am happy that you like your new bed, and hope you have many years of enjoyable, and restful sleep upon it. |